Products
  • No. 1124 CHANGING FIXTURE PP80 - PNEUMATIC CHANGER

  • No. 5336 Revolving tailstock center - Tip angle 60°, Mount MT 2, Size 02, with small casing diameter

  • No. 5357 Dead center, Mount MT 4, similar DIN 807, full point with draw-off nut and SW material tool steel

  • No. 5359 Draw-off nut MK4 M35x1,5

  • No. 5381 Dead center, Mount MT 5, similar DIN 807, full point with draw-off nut and SW material tool steel

  • No. 5383 Draw-off nut MK5 M48X1,5 BR

  • No. 5428 Draw-off nut MK6 M68X1,5 BR

  • No. 5429 Revolving tailstock center - Tip angle 60°, Mount MT 3, Size 04, with small casing diameter

  • No. 5469 Revolving tailstock center - Tip angle 60°, Mount MT 4, Size 08, with small casing diameter

  • No. 5490 Revolving tailstock center - Tip angle 60°, Mount MT 5, Size 10, with small casing diameter

  • No. 5547 Revolving tailstock center - Tip angle 60°, Mount MT 6, Size 14, with small casing diameter

  • No. 5654 Dead center, Mount MT 3, similar DIN 807, full point with draw-off nut and SW material tool steel

  • No. 5656 Draw-off nut MK3 M27X1,5

  • No. 6252 O-Ring, Size 21,82x3,53

  • No. 6901 CHANGING FIXTURE PP120

  • No. 7182 Drilling machine vice DPV 3-W, size 2, jaw width 100, with V-jaw and normal jaw SBO

  • No. 7193 Drilling machine vice BSH, size 1, jaw width 63, small, light D. I. Y. design

  • No. 7194 Drilling machine vice BSH, size 2, jaw width 80, small, light D. I. Y. design

  • No. 7196 Drilling machine vice BSH, size 3, jaw width 100, small, light D. I. Y. design

  • No. 7197 Drilling machine vice BSH, size 4, jaw width 80, sturdy craftsman design

  • No. 7201 Drilling machine vice BSH, size 5, jaw width 100, sturdy craftsman design

  • No. 7202 Drilling machine vice BSH, size 6, jaw width 120, sturdy craftsman design

  • No. 7207 Drilling machine vice BSH, size 7, jaw width 140, sturdy craftsman design

  • No. 10613 Revolving centering taper, Mount MT 2, Size 272, pointed

  • No. 10635 Revolving centering taper, Mount MT 3, Size 273, pointed

  • No. 10638 Revolving centering taper, Mount MT 4, Size 274, pointed

  • No. 10642 Revolving centering taper, Mount MT 5, Size 275, pointed

  • No. 13706 Dead center, Mount MT 0, DIN 806, full point, material tool steel

  • No. 13707 Dead center, Mount MT 1, DIN 806, full point, material tool steel

  • No. 13709 Dead center, Mount MT 2, DIN 806, full point, material tool steel

  • No. 13711 Dead center, Mount MT 3, DIN 806, full point, material tool steel

  • No. 13712 Dead center, Mount MT 4, DIN 806, full point, material tool steel

  • No. 13715 Dead center, Mount MT 5, DIN 806, full point, material tool steel

  • No. 13718 Dead center, Mount MT 6, DIN 806, full point, material tool steel

  • No. 13868 Dead center, Mount MT 2, DIN 806, half point, material tool steel

  • No. 13870 Dead center, Mount MT 3, DIN 806, half point, material tool steel

  • No. 13871 Dead center, Mount MT 4, DIN 806, half point, material tool steel

  • No. 13997 Dead center, Mount MT 5, DIN 806, half point, material tool steel

  • No. 14523 Machine vice UZ, size 2, jaw width 113, Self centering vice

  • No. 14740 Machine vice UZ, size 3, jaw width 135, Self centering vice

  • No. 14752 Machine vice UZ, size 4, jaw width 160, Self centering vice

  • No. 14802 Machine vice UZ, size 5, jaw width 200, Self centering vice

  • No. 14807 Machine vice UZ, size 6, jaw width 250, Self centering vice

  • No. 14897 Taper shank arbors with drill chuck taper DIN 238, MT 1, Mount B10, completely hardened and ground

  • No. 14898 Taper shank arbors with drill chuck taper DIN 238, MT 1, Mount B12, completely hardened and ground

  • No. 14899 Taper shank arbors with drill chuck taper DIN 238, MT 1, Mount B16, completely hardened and ground

  • No. 14900 Taper shank arbors with drill chuck taper DIN 238, MT 1, Mount B18, completely hardened and ground

  • No. 14904 Taper shank arbors with drill chuck taper DIN 238, MT 2, Mount B10, completely hardened and ground

  • No. 14905 Taper shank arbors with drill chuck taper DIN 238, MT 2, Mount B12, completely hardened and ground

  • No. 14906 Taper shank arbors with drill chuck taper DIN 238, MT 2, Mount B16, completely hardened and ground

  • No. 14907 Taper shank arbors with drill chuck taper DIN 238, MT 2, Mount B18, completely hardened and ground

  • No. 14908 Taper shank arbors with drill chuck taper DIN 238, MT 2, Mount B22, completely hardened and ground

  • No. 14911 Taper shank arbors with drill chuck taper DIN 238, MT 3, Mount B12, completely hardened and ground

  • No. 14912 Taper shank arbors with drill chuck taper DIN 238, MT 3, Mount B16, completely hardened and ground

  • No. 14913 Taper shank arbors with drill chuck taper DIN 238, MT 3, Mount B18, completely hardened and ground

  • No. 14914 Taper shank arbors with drill chuck taper DIN 238, MT 3, Mount B22, completely hardened and ground

  • No. 14915 Taper shank arbors with drill chuck taper DIN 238, MT 3, Mount B24, completely hardened and ground

  • No. 14916 Taper shank arbors with drill chuck taper DIN 238, MT 4, Mount B16, completely hardened and ground

  • No. 14917 Taper shank arbors with drill chuck taper DIN 238, MT 4, Mount B18, completely hardened and ground

  • No. 14918 Taper shank arbors with drill chuck taper DIN 238, MT 4, Mount B22, completely hardened and ground

  • No. 14919 Taper shank arbors with drill chuck taper DIN 238, MT 4, Mount B24, completely hardened and ground

  • No. 14920 Taper shank arbors with drill chuck taper DIN 238, MT 5, Mount B16, completely hardened and ground

  • No. 14921 Taper shank arbors with drill chuck taper DIN 238, MT 5, Mount B18, completely hardened and ground

  • No. 14922 Taper shank arbors with drill chuck taper DIN 238, MT 5, Mount B22, completely hardened and ground

  • No. 14923 Taper shank arbors with drill chuck taper DIN 238, MT 5, Mount B24, completely hardened and ground

  • No. 14970 Taper shank arbors with Jacobs drill chuck taper, MT 1, Mount J1, completely hardened and ground

  • No. 14971 Taper shank arbors with Jacobs drill chuck taper, MT 1, Mount J2, completely hardened and ground

  • No. 14972 Taper shank arbors with Jacobs drill chuck taper, MT 1, Mount J3, completely hardened and ground

  • No. 14974 Taper shank arbors with Jacobs drill chuck taper, MT 1, Mount J6, completely hardened and ground

  • No. 14976 Taper shank arbors with Jacobs drill chuck taper, MT 2, Mount J1, completely hardened and ground

  • No. 14977 Taper shank arbors with Jacobs drill chuck taper, MT 2, Mount J2, completely hardened and ground

  • No. 14978 Taper shank arbors with Jacobs drill chuck taper, MT 2, Mount J3, completely hardened and ground

  • No. 14980 Taper shank arbors with Jacobs drill chuck taper, MT 2, Mount J33, completely hardened and ground

  • No. 14981 Taper shank arbors with Jacobs drill chuck taper, MT 2, Mount J6, completely hardened and ground

  • No. 14983 Taper shank arbors with Jacobs drill chuck taper, MT 3, Mount J2, completely hardened and ground

  • No. 14984 Taper shank arbors with Jacobs drill chuck taper, MT 3, Mount J3, completely hardened and ground

  • No. 14987 Taper shank arbors with Jacobs drill chuck taper, MT 3, Mount J33, completely hardened and ground

  • No. 14988 Taper shank arbors with Jacobs drill chuck taper, MT 3, Mount J6, completely hardened and ground

  • No. 14991 Taper shank arbors with Jacobs drill chuck taper, MT 4, Mount J3, completely hardened and ground

  • No. 14995 Taper shank arbors with Jacobs drill chuck taper, MT 4, Mount J6, completely hardened and ground

  • No. 17017 Reducing sleeves Precision version DIN 2185, External taper MT 1, Internal taper MT 0, completely hardened, ground internal and external

  • No. 17018 Reducing sleeves Precision version DIN 2185, External taper MT 2, Internal taper MT 1, completely hardened, ground internal and external

  • No. 17019 Reducing sleeves Precision version DIN 2185, External taper MT 3, Internal taper MT 1, completely hardened, ground internal and external

  • No. 17020 Reducing sleeves Precision version DIN 2185, External taper MT 3, Internal taper MT 2, completely hardened, ground internal and external

  • No. 17021 Reducing sleeves Precision version DIN 2185, External taper MT 4, Internal taper MT 1, completely hardened, ground internal and external

  • No. 17022 Reducing sleeves Precision version DIN 2185, External taper MT 4, Internal taper MT 2, completely hardened, ground internal and external

  • No. 17023 Reducing sleeves Precision version DIN 2185, External taper MT 4, Internal taper MT 3, completely hardened, ground internal and external

  • No. 17024 Reducing sleeves Precision version DIN 2185, External taper MT 5, Internal taper MT 1, completely hardened, ground internal and external

  • No. 17025 Reducing sleeves Precision version DIN 2185, External taper MT 5, Internal taper MT 2, completely hardened, ground internal and external

  • No. 17026 Reducing sleeves Precision version DIN 2185, External taper MT 5, Internal taper MT 3, completely hardened, ground internal and external

  • No. 17027 Reducing sleeves Precision version DIN 2185, External taper MT 5, Internal taper MT 4, completely hardened, ground internal and external

  • No. 17028 Reducing sleeves Precision version DIN 2185, External taper MT 6, Internal taper MT 2, completely hardened, ground internal and external

  • No. 17029 Reducing sleeves Precision version DIN 2185, External taper MT 6, Internal taper MT 3, completely hardened, ground internal and external

  • No. 17030 Reducing sleeves Precision version DIN 2185, External taper MT 6, Internal taper MT 4, completely hardened, ground internal and external

  • No. 17031 Reducing sleeves Precision version DIN 2185, External taper MT 6, Internal taper MT 5, completely hardened, ground internal and external

  • No. 17075 Taper drift for MT 0

  • No. 17076 Taper drift for MT 1-2

  • No. 17077 Taper drift for MT 3

  • No. 17078 Taper drift for MT 4

  • No. 17079 Taper drift for MT 5-6

  • No. 17171 Dead center, Mount MT 2, DIN 806, full point, ground only, carbide-tipped

  • No. 17172 Dead center, Mount MT 3, DIN 806, full point, ground only, carbide-tipped

  • No. 17173 Dead center, Mount MT 4, DIN 806, full point, ground only, carbide-tipped

  • No. 18755 Taper shank arbors with drill chuck taper DIN 238, MT 1, Mount B18, completely hardened and ground

  • No. 18756 Taper shank arbors with drill chuck taper DIN 238, MT 2, Mount B18, completely hardened and ground

  • No. 18757 Taper shank arbors with drill chuck taper DIN 238, MT 3, Mount B18, completely hardened and ground

  • No. 18758 Taper shank arbors with drill chuck taper DIN 238, MT 4, Mount B18, completely hardened and ground

  • No. 18759 Taper shank arbors with drill chuck taper DIN 238, MT 5, Mount B18, completely hardened and ground

  • No. 25835 Drill chuck key with DIN-toothing 6349 for Key-type drill chuck, Size S3

  • No. 25839 Drill chuck key with DIN-toothing 6349 for Key-type drill chuck, Size S4

  • No. 26411 Drill chuck key with DIN-toothing 6349 for Key-type drill chuck, Size S1

  • No. 26571 Dead center, Mount MT 4, DIN 806, half point, ground only, carbide-tipped

  • No. 27439 Dead center, Mount MT 2, DIN 806, half point, ground only, carbide-tipped

  • No. 27440 Dead center, Mount MT 3, DIN 806, half point, ground only, carbide-tipped

  • No. 27441 Dead center, Mount MT 5, DIN 806, half point, ground only, carbide-tipped

  • No. 28975 C 15: Special grease F80 for lathe chucks. For lubrication and conservation of clamping force.

  • No. 29122 Extension sleeve VLH, Precision version DIN 2187, External taper MT 1, Internal taper MT 1, completely hardened, ground internal and external

  • No. 29123 Extension sleeve VLH, Precision version DIN 2187, External taper MT 1, Internal taper MT 2, completely hardened, ground internal and external

  • No. 29124 Extension sleeve VLH, Precision version DIN 2187, External taper MT 2, Internal taper MT 1, completely hardened, ground internal and external

  • No. 29125 Extension sleeve VLH, Precision version DIN 2187, External taper MT 2, Internal taper MT 2, completely hardened, ground internal and external

  • No. 29126 Extension sleeve VLH, Precision version DIN 2187, External taper MT 2, Internal taper MT 3, completely hardened, ground internal and external

  • No. 29127 Extension sleeve VLH, Precision version DIN 2187, External taper MT 3, Internal taper MT 1, completely hardened, ground internal and external

  • No. 29128 Extension sleeve VLH, Precision version DIN 2187, External taper MT 3, Internal taper MT 2, completely hardened, ground internal and external

  • No. 29129 Extension sleeve VLH, Precision version DIN 2187, External taper MT 3, Internal taper MT 3, completely hardened, ground internal and external

  • No. 29130 Extension sleeve VLH, Precision version DIN 2187, External taper MT 3, Internal taper MT 4, completely hardened, ground internal and external

  • No. 29131 Extension sleeve VLH, Precision version DIN 2187, External taper MT 4, Internal taper MT 1, completely hardened, ground internal and external

  • No. 29132 Extension sleeve VLH, Precision version DIN 2187, External taper MT 4, Internal taper MT 2, completely hardened, ground internal and external

  • No. 29133 Extension sleeve VLH, Precision version DIN 2187, External taper MT 4, Internal taper MT 3, completely hardened, ground internal and external

  • No. 29134 Extension sleeve VLH, Precision version DIN 2187, External taper MT 4, Internal taper MT 4, completely hardened, ground internal and external

  • No. 29135 Extension sleeve VLH, Precision version DIN 2187, External taper MT 4, Internal taper MT 5, completely hardened, ground internal and external

  • No. 29136 Extension sleeve VLH, Precision version DIN 2187, External taper MT 5, Internal taper MT 1, completely hardened, ground internal and external

  • No. 29137 Extension sleeve VLH, Precision version DIN 2187, External taper MT 5, Internal taper MT 2, completely hardened, ground internal and external

  • No. 29138 Extension sleeve VLH, Precision version DIN 2187, External taper MT 5, Internal taper MT 3, completely hardened, ground internal and external

  • No. 29139 Extension sleeve VLH, Precision version DIN 2187, External taper MT 5, Internal taper MT 4, completely hardened, ground internal and external

  • No. 29140 Extension sleeve VLH, Precision version DIN 2187, External taper MT 5, Internal taper MT 5, completely hardened, ground internal and external

  • No. 29141 Extension sleeve VLH, Precision version DIN 2187, External taper MT 6, Internal taper MT 4, completely hardened, ground internal and external

  • No. 29142 Extension sleeve VLH, Precision version DIN 2187, External taper MT 6, Internal taper MT 5, completely hardened, ground internal and external

  • No. 29143 Drill- and reamer extensions BV, Precision version, External taper MT 1, Internal taper MT 1, completely hardened, ground internal and external

  • No. 29144 Drill- and reamer extensions BV, Precision version, External taper MT 1, Internal taper MT 1, completely hardened, ground internal and external

  • No. 29145 Drill- and reamer extensions BV, Precision version, External taper MT 1, Internal taper MT 1, completely hardened, ground internal and external

  • No. 29146 Drill- and reamer extensions BV, Precision version, External taper MT 1, Internal taper MT 1, completely hardened, ground internal and external

  • No. 29147 Drill- and reamer extensions BV, Precision version, External taper MT 1, Internal taper MT 1, completely hardened, ground internal and external

  • No. 29148 Drill- and reamer extensions BV, Precision version, External taper MT 1, Internal taper MT 1, completely hardened, ground internal and external

  • No. 29149 Drill- and reamer extensions BV, Precision version, External taper MT 1, Internal taper MT 1, completely hardened, ground internal and external

  • No. 29150 Drill- and reamer extensions BV, Precision version, External taper MT 2, Internal taper MT 2, completely hardened, ground internal and external

  • No. 29151 Drill- and reamer extensions BV, Precision version, External taper MT 2, Internal taper MT 2, completely hardened, ground internal and external

  • No. 29152 Drill- and reamer extensions BV, Precision version, External taper MT 2, Internal taper MT 2, completely hardened, ground internal and external

  • No. 29153 Drill- and reamer extensions BV, Precision version, External taper MT 2, Internal taper MT 2, completely hardened, ground internal and external

  • No. 29154 Drill- and reamer extensions BV, Precision version, External taper MT 2, Internal taper MT 2, completely hardened, ground internal and external

  • No. 29155 Drill- and reamer extensions BV, Precision version, External taper MT 2, Internal taper MT 2, completely hardened, ground internal and external

  • No. 29156 Drill- and reamer extensions BV, Precision version, External taper MT 2, Internal taper MT 2, completely hardened, ground internal and external

  • No. 29157 Drill- and reamer extensions BV, Precision version, External taper MT 2, Internal taper MT 2, completely hardened, ground internal and external

  • No. 29158 Drill- and reamer extensions BV, Precision version, External taper MT 3, Internal taper MT 3, completely hardened, ground internal and external

  • No. 29159 Drill- and reamer extensions BV, Precision version, External taper MT 3, Internal taper MT 3, completely hardened, ground internal and external

  • No. 29160 Drill- and reamer extensions BV, Precision version, External taper MT 3, Internal taper MT 3, completely hardened, ground internal and external

  • No. 29161 Drill- and reamer extensions BV, Precision version, External taper MT 3, Internal taper MT 3, completely hardened, ground internal and external

  • No. 29162 Drill- and reamer extensions BV, Precision version, External taper MT 3, Internal taper MT 3, completely hardened, ground internal and external

  • No. 29163 Drill- and reamer extensions BV, Precision version, External taper MT 3, Internal taper MT 3, completely hardened, ground internal and external

  • No. 29164 Drill- and reamer extensions BV, Precision version, External taper MT 3, Internal taper MT 3, completely hardened, ground internal and external

  • No. 29165 Drill- and reamer extensions BV, Precision version, External taper MT 4, Internal taper MT 4, completely hardened, ground internal and external

  • No. 29166 Drill- and reamer extensions BV, Precision version, External taper MT 4, Internal taper MT 4, completely hardened, ground internal and external

  • No. 29167 Drill- and reamer extensions BV, Precision version, External taper MT 4, Internal taper MT 4, completely hardened, ground internal and external

  • No. 29168 Drill- and reamer extensions BV, Precision version, External taper MT 4, Internal taper MT 4, completely hardened, ground internal and external

  • No. 29169 Drill- and reamer extensions BV, Precision version, External taper MT 4, Internal taper MT 4, completely hardened, ground internal and external

  • No. 29170 Drill- and reamer extensions BV, Precision version, External taper MT 4, Internal taper MT 4, completely hardened, ground internal and external

  • No. 37531 C 21: Reversible top jaws, hardened serration 90°- material: 16 MnCr 5. 3-jaw set.

  • No. 42175 Revolving tailstock center - Tip angle 60°, Mount MT 4, Size 108, H body hardened and ground

  • No. 42315 Revolving tailstock center - Tip angle 60°, Mount MT 3, Size 104, H body hardened and ground

  • No. 42776 Revolving tailstock center - Tip angle 60°, Mount MT 3, Size 106, H body hardened and ground

  • No. 42843 Revolving tailstock center - Tip angle 60°, Mount MT 5, Size 110, H body hardened and ground

  • No. 43115 Revolving tailstock center - Tip angle 60°, Mount MT 2, Size 102, H body hardened and ground

  • No. 43400 Revolving tailstock center - Tip angle 60°, Mount MT 1, Size 101, H body hardened and ground

  • No. 43532 Revolving tailstock center - Tip angle 60°, Mount MT 6, Size 114, H body hardened and ground

  • No. 44023 Revolving centering taper, Mount MT 4, Size 173a, bull nose, 60°

  • No. 45794 C 21: Soft top jaws, can be hardened serration 90°- material: 16 MnCr 5. 2-jaw set.

  • No. 45795 C 21: Soft top jaws, can be hardened serration 90°- material: 16 MnCr 5. 2-jaw set.

  • No. 45796 C 21: Reversible top jaws, hardened serration 90°- material: 16 MnCr 5. 2-jaw set.

  • No. 46402 C 21: Soft top jaws, can be hardened serration 90°- material: 16 MnCr 5. 3-jaw set.

  • No. 46403 C 21: Soft top jaws, 3-jaw set, can be hardened serration 90° - material: 16 MnCr 5.

  • No. 46404 C 21: Reversible top jaws, 3-jaw set, hardened serration 90° - material: 16 MnCr 5.

  • No. 46414 C 21: Reversible top jaws, 3-jaw set, hardened serration 90° - material: 16 MnCr 5.

  • No. 46435 C 21: Reversible top jaws, hardened serration 90°- material: 16 MnCr 5. 2-jaw set.

  • No. 46447 C 21: Reversible top jaws, hardened serration 90°- material: 16 MnCr 5. 2-jaw set.

  • No. 46544 C 21: Reversible top jaws, hardened serration 90°- material: 16 MnCr 5. 3-jaw set.

  • No. 46545 C 21: Reversible top jaws, hardened serration 90°- material: 16 MnCr 5. 2-jaw set.

  • No. 48205 Threaded pin, Size M 5 x 8

  • No. 58668 Revolving tailstock center - Tip angle 60°, Mount MT 1, Size 101, HVL with centre point

  • No. 58669 Revolving tailstock center - Tip angle 60°, Mount MT 2, Size 102, HVL with centre point

  • No. 58670 Revolving tailstock center - Tip angle 60°, Mount MT 3, Size 106, HVL with centre point

  • No. 58671 Revolving tailstock center - Tip angle 60°, Mount MT 4, Size 108, HVL with centre point

  • No. 58672 Revolving tailstock center - Tip angle 60°, Mount MT 5, Size 110, HVL with centre point

  • No. 58673 Revolving tailstock center - Tip angle 60°, Mount MT 6, Size 114, HVL with centre point

  • No. 60798 Revolving tailstock center - Tip angle 60°, Mount MT 3, Size 503, AC with pressure display and length compensation as counter centre with face drivers

  • No. 60874 Revolving tailstock center - Tip angle 60°, Mount MT 4, Size 504, AC with pressure display and length compensation as counter centre with face drivers

  • No. 60906 Revolving tailstock center - Tip angle 60°, Mount MT 5, Size 505, AC with pressure display and length compensation as counter centre with face drivers

  • No. 60915 Revolving tailstock center - Tip angle 60°, Mount MT 6, Size 506, AC with pressure display and length compensation as counter centre with face drivers

  • No. 61030 Revolving tailstock center - for interchangeable inserts, Mount MT 2, Size 102

  • No. 61031 Revolving tailstock center - for interchangeable inserts, Mount MT 3, Size 104

  • No. 61032 Revolving tailstock center - for interchangeable inserts, Mount MT 3, Size 106

  • No. 61038 Revolving tailstock center - for interchangeable inserts, Mount MT 4, Size 108

  • No. 61039 Revolving tailstock center - for interchangeable inserts, Mount MT 5, Size 110

  • No. 61040 Revolving tailstock center - for interchangeable inserts, Mount MT 6, Size 114

  • No. 61702 Revolving tailstock centre, Mount MT 2, Size 102, complete with all inserts in a sturdy wooden case

  • No. 61703 Revolving tailstock centre, Mount MT 3, Size 104, complete with all inserts in a sturdy wooden case

  • No. 61704 Revolving tailstock centre, Mount MT 3, Size 106, complete with all inserts in a sturdy wooden case

  • No. 61705 Revolving tailstock centre, Mount MT 4, Size 108, complete with all inserts in a sturdy wooden case

  • No. 61706 Revolving tailstock centre, Mount MT 5, Size 110, complete with all inserts in a sturdy wooden case

  • No. 61707 EXTRACTOR for size 102

  • No. 61708 EXTRACTOR for size 104, 106, 108

  • No. 61709 EXTRACTOR for size 110, 114

  • No. 62211 Revolving centering taper, Mount MT 3, Size 173, bull nose, 75°

  • No. 62224 Revolving centering taper, Mount MT 4, Size 173a, bull nose, 75°

  • No. 62232 Revolving centering taper, Mount MT 5, Size 173b, bull nose, 75°

  • No. 62299 Revolving centering taper, Mount MT 4, Size 174, bull nose, 75°

  • No. 63614 Revolving centering taper, Mount MT 5, Size 174a, bull nose, 75°

  • No. 63633 Revolving centering taper, Mount MT 6, Size 174b, bull nose, 75°

  • No. 63656 Revolving centering taper, Mount MT 6, Size 175a, bull nose, 75°

  • No. 63662 Revolving centering taper, Mount MT 5, Size 175, bull nose, 75°

  • No. 63680 Revolving centering taper, Mount MT 6, Size 176, bull nose, 75°

  • No. 64524 Key-Type drill chuck Prima, Size 10, Mount 1/2"-20, 1-10mm Clamping Capacity, S2 A Key

  • No. 64527 Key-type drill chuck Prima S, Size 13S, Mount 3/8"-24, Clamping capacity 1.5-13, slight intermediate sizes

  • No. 64530 Key-Type Drill Chuck Prima-S, Size 13S , Mount 1/2"-20, Clamping Capacity 1.5-13mm, S2 A Key

  • No. 68003 S7 Drill chuck key , K1 equivalent

  • No. 68006 S10 Drill Chuck Key

  • No. 68007 S13 Drill chuck key , K4 equivalent

  • No. 70679 Key-Type Drill Chuck Prima 10S, Mount 3/8"-24, Clamping capacity 0.8-10mm, S2 A Key

  • No. 70700 Interchangeable insert for Revolving tailstock center, Size 102, for tubular workpieces 60°

  • No. 70701 Interchangeable insert for Revolving tailstock center, Size 104, for tubular workpieces 60°

  • No. 70702 Interchangeable insert for Revolving tailstock center, Size 106, for tubular workpieces 60°

  • No. 70703 Interchangeable insert for Revolving tailstock center, Size 108, for tubular workpieces 60°

  • No. 70704 Interchangeable insert for Revolving tailstock center, Size 110, for tubular workpieces 60°

  • No. 70705 Interchangeable insert for Revolving tailstock center, Size 114, for tubular workpieces 60°

  • No. 70707 Interchangeable insert for Revolving tailstock center, Size 102, A for centerless workpieces 60°

  • No. 70708 Interchangeable insert for Revolving tailstock center, Size 104, A for centerless workpieces 60°

  • No. 70709 Interchangeable insert for Revolving tailstock center, Size 106, A for centerless workpieces 60°

  • No. 70710 Interchangeable insert for Revolving tailstock center, Size 108, A for centerless workpieces 60°

  • No. 70711 Interchangeable insert for Revolving tailstock center, Size 110, A for centerless workpieces 60°

  • No. 70712 Interchangeable insert for Revolving tailstock center, Size 114, A for centerless workpieces 60°

  • No. 70719 Interchangeable insert for Revolving tailstock center, Size 102, 60°VL

  • No. 70720 Interchangeable insert for Revolving tailstock center, Size 104, 106, 60°VL

  • No. 70721 Interchangeable insert for Revolving tailstock center, Size 108, 60°VL

  • No. 70722 Interchangeable insert for Revolving tailstock center, Size 110, 60°VL

  • No. 70723 Interchangeable insert for Revolving tailstock center, Size 114, 60°VL

  • No. 70725 Interchangeable insert for Revolving tailstock center, Size 102, 60°

  • No. 70727 Interchangeable insert for Revolving tailstock center, Size 102, 90°

  • No. 70728 Interchangeable insert for Revolving tailstock center, Size 104, 60°

  • No. 70730 Interchangeable insert for Revolving tailstock center, Size 104, 90°

  • No. 70731 Interchangeable insert for Revolving tailstock center, Size 106, 60°

  • No. 70733 Interchangeable insert for Revolving tailstock center, Size 106, 90°

  • No. 70734 Interchangeable insert for Revolving tailstock center, Size 108, 60°

  • No. 70736 Interchangeable insert for Revolving tailstock center, Size 108, 90°

  • No. 70737 Interchangeable insert for Revolving tailstock center, Size 110, 60°

  • No. 70739 Interchangeable insert for Revolving tailstock center, Size 110, 90°

  • No. 70740 Interchangeable insert for Revolving tailstock center, Size 114, 60°

  • No. 70742 Interchangeable insert for Revolving tailstock center, Size 114, 90°

  • No. 72628 Key-Type Drill Chuck Prima 8, Mount 3/8"-24, Clamping capacity 0.5-8mm, S2 A Key

  • No. 72631 Key-Type Drill Chuck Prima 8, Mount 1/2"-20, Clamping capacity 0.5-8mm, S2 A Key

  • No. 72653 Key-type drill chuck Prima S, Size 10S, Mount B12, Clamping capacity 0.8-10, slight intermediate sizes

  • No. 72656 Key-Type Drill Chuck Prima 8, Mount J1, Clamping capacity 0.5-8mm, S2 A Key

  • No. 72662 Key-Type Drill Chuck Prima, Mount J1, Clamping Capacity 1/32" - 3/8"

  • No. 72687 Key-type drill chuck Prima, Size 10, Mount B16, Clamping capacity 1-10, heavy industrial version

  • No. 72693 Key-type drill chuck Prima, Size 10, Mount J2, Clamping capacity 1-10, heavy industrial version

  • No. 72800 Key-type drill chuck Prima S, Size 13S, Mount B16, Clamping capacity 1.5-13, slight intermediate sizes

  • No. 72807 Key-Type Drill Chuck Prima, Clamping capacity 1/64"-5/32", Mount J0

  • No. 72810 Key-type drill chuck Prima, Size 6, Mount J1, Clamping capacity 0.5-6.5, heavy industrial version

  • No. 72811 Key-type drill chuck Prima M, Size 6M, Mount 3/8"-24, Clamping capacity 0.5-6.5, slight intermediate sizes

  • No. 72818 Key-type drill chuck Prima, Size 13, Mount J6, Clamping capacity 1-13, heavy industrial version

  • No. 72819 Key-type drill chuck Prima, Size 13, Mount J33, Clamping capacity 1-13, heavy industrial version

  • No. 72820 Key-type drill chuck Prima, Size 13, Mount 5/8"-16, Clamping capacity 1-13, heavy industrial version

  • No. 72825 Key-type drill chuck Prima, Size 16, Mount B18, Clamping capacity 1-16, heavy industrial version

  • No. 72827 Key-type drill chuck Prima, Size 16, Mount J3, Clamping capacity 1-16, heavy industrial version

  • No. 72828 Key-type drill chuck Prima, Size 16, Mount J6, Clamping capacity 1-16, heavy industrial version

  • No. 72829 Key-Type Drill Chuck Prima, Clamping capacity 1/8"-5/8", Mount 5/8"-16

  • No. 72831 Key-type drill chuck Prima, Size 20, Mount B22, Clamping capacity 5-20, heavy industrial version

  • No. 72833 Key-type drill chuck Prima, Size 20, Mount J3, Clamping capacity 5-20, heavy industrial version

  • No. 72834 Key-type drill chuck Prima, Size 26, Mount B24, Clamping capacity 5-26, heavy industrial version

  • No. 72866 Key-type Drill Chuck Prima-M, Clamping capacity 1/8"-5/8", Mount 1/2"-20

  • No. 72897 Key-type drill chuck Prima S, Size 13S, Mount B12, Clamping capacity 1.5-13, slight intermediate sizes

  • No. 74390 Revolving tailstock center - Tip angle 60°, Mount MT 5, Size 110, HG with draw-off nut

  • No. 79920 Revolving tailstock center - Tip angle 60°, Mount MT 3, Size 503, AC-VL with extended centre point

  • No. 79921 Revolving tailstock center - Tip angle 60°, Mount MT 4, Size 504, AC-VL with extended centre point

  • No. 79922 Revolving tailstock center - Tip angle 60°, Mount MT 5, Size 505, AC-VL with extended centre point

  • No. 79923 Revolving tailstock center - Tip angle 60°, Mount MT 6, Size 506, AC-VL with extended centre point

  • No. 82392 Revolving tailstock center - Tip angle 60°, Mount MT 2, Size 102, HP precision version

  • No. 82394 Revolving tailstock center - Tip angle 60°, Mount MT 4, Size 108, HP precision version

  • No. 82395 Revolving tailstock center - Tip angle 60°, Mount MT 5, Size 110, HP precision version

  • No. 85033 Mounting sleeve, MT inside 3, for the clamping of a face driver in lathe chuck

  • No. 85034 Mounting sleeve, MT inside 4, for the clamping of a face driver in lathe chuck

  • No. 85035 Mounting sleeve, MT inside 5, for the clamping of a face driver in lathe chuck

  • No. 85036 Mounting sleeve, MT inside 6, for the clamping of a face driver in lathe chuck

  • No. 86619 Centres with head, length 60°, taper-Ø 21, CoA

  • No. 86620 Centres with head, length 60°, taper-Ø 27, CoA

  • No. 86621 Centres with head, length 60°, taper-Ø 40, CoA

  • No. 86622 Centres with head, length 60°, taper-Ø 56, CoA

  • No. 86758 Centre, clamping circuit 25-80, CoA

  • No. 87931 Hard metal driving plates, Size 9,5x3,2, right- and left-hand rotation,

  • No. 88046 Constant face driver basic body, ZA 100, in Flanschausführung, with spring set, CoA hydraulic

  • No. 88061 Driving discs, clamping circuit 8, toothed, right-hand rotation

  • No. 88062 Driving discs, clamping circuit 10, toothed, right-hand rotation

  • No. 88063 Driving discs, clamping circuit 12, toothed, right-hand rotation

  • No. 88064 Driving discs, clamping circuit 16, toothed, right-hand rotation

  • No. 88065 Driving discs, clamping circuit 20, toothed, right-hand rotation

  • No. 88066 Driving discs, clamping circuit 25, toothed, right-hand rotation

  • No. 88067 Driving discs, clamping circuit 32, toothed, right-hand rotation

  • No. 88068 Driving discs, clamping circuit 40, with interchangeable, hard metal driving plates 9,5 x 3,2 which can be used on 4 sides , right-hand rotation

  • No. 88069 Driving discs, clamping circuit 50, with interchangeable, hard metal driving plates 9,5 x 3,2 which can be used on 4 sides , right-hand rotation

  • No. 88070 Driving discs, clamping circuit 63, with interchangeable, hard metal driving plates 9,5 x 3,2 which can be used on 4 sides , right-hand rotation

  • No. 88071 Driving discs, clamping circuit 80, with interchangeable, hard metal driving plates 9,5 x 3,2 which can be used on 4 sides , right-hand rotation

  • No. 88074 Constant face driver basic body CoA, hydraulic compensation, with spring set. To be clamped in lathe chuck over Ø85mm body OD.

  • No. 88081 Driving discs, clamping circuit 8, toothed, left-hand rotation

  • No. 88082 Driving discs, clamping circuit 10, toothed, left-hand rotation

  • No. 88083 Driving discs, clamping circuit 12, toothed, left-hand rotation

  • No. 88084 Driving discs, clamping circuit 16, toothed, left-hand rotation

  • No. 88085 Driving discs, clamping circuit 20, toothed, left-hand rotation

  • No. 88086 Driving discs, clamping circuit 25, toothed, left-hand rotation

  • No. 88087 Driving discs, clamping circuit 32, toothed, left-hand rotation

  • No. 88088 Driving discs, clamping circuit 40, with interchangeable, hard metal driving plates 9,5 x 3,2 which can be used on 4 sides , left-hand rotation

  • No. 88089 Driving discs, clamping circuit 50, with interchangeable, hard metal driving plates 9,5 x 3,2 which can be used on 4 sides , left-hand rotation

  • No. 88090 Driving discs, clamping circuit 63, with interchangeable, hard metal driving plates 9,5 x 3,2 which can be used on 4 sides , left-hand rotation

  • No. 88091 Driving discs, clamping circuit 80, with interchangeable, hard metal driving plates 9,5 x 3,2 which can be used on 4 sides , left-hand rotation

  • No. 88173 Constant face driver basic body, MT 3, (basic body without centre) CoA hydraulic

  • No. 88174 Constant face driver basic body, MT 4, (basic body without centre) CoA hydraulic

  • No. 88175 Constant face driver basic body, MT 5, (basic body without centre) CoA hydraulic

  • No. 88176 Constant face driver basic body, MT 6, (basic body without centre) CoA hydraulic

  • No. 88177 Constant face driver basic body, MT 3, with draw-off nut, CoA hydraulic

  • No. 88178 Constant face driver basic body, MT 4, with draw-off nut, CoA hydraulic

  • No. 88179 Constant face driver basic body, MT 5, with draw-off nut, CoA hydraulic

  • No. 88180 Constant face driver basic body, MT 6, with draw-off nut, CoA hydraulic

  • No. 88205 Clamping screw, Size M 5 x 8

  • No. 88209 Hard metal driving plates, Size 9,5x3,2, right- oder left-hand rotation,

  • No. 88230 RÖHM slide rule to calculate axial tailstock loading

  • No. 88233 Constant face driver, large assortment in wooden box hydraulic, clamping circuit 10-80 mm, turning range 11-160 mm, MT 3, right-hand rotation, with draw-off nut, CoA

  • No. 88234 Constant face driver, large assortment in wooden box hydraulic, clamping circuit 10-80 mm, turning range 11-160 mm, MT 4, right-hand rotation, with draw-off nut, CoA

  • No. 88235 Constant face driver, large assortment in wooden box hydraulic, clamping circuit 10-80 mm, turning range 11-160 mm, MT 5, right-hand rotation, with draw-off nut, CoA

  • No. 88236 Constant face driver, large assortment in wooden box hydraulic, clamping circuit 10-80 mm, turning range 11-160 mm, MT 6, right-hand rotation, with draw-off nut, CoA

  • No. 88238 Constant face driver, large assortment in wooden box hydraulic, clamping circuit 10-80 mm, turning range 11-160 mm, MT 3, left-hand rotation, with draw-off nut, CoA

  • No. 88239 Constant face driver, large assortment in wooden box hydraulic, clamping circuit 10-80 mm, turning range 11-160 mm, MT 4, left-hand rotation, with draw-off nut, CoA

  • No. 88240 Constant face driver, large assortment in wooden box hydraulic, clamping circuit 10-80 mm, turning range 11-160 mm, MT 5, left-hand rotation, with draw-off nut, CoA

  • No. 88241 Constant face driver, large assortment in wooden box hydraulic, clamping circuit 10-80 mm, turning range 11-160 mm, MT 6, left-hand rotation, with draw-off nut, CoA

  • No. 88351 Centre, clamping circuit 8-10, CoA

  • No. 88352 Centre, clamping circuit 12, CoA

  • No. 88353 Centre, clamping circuit 16, CoA

  • No. 88354 Centre, clamping circuit 20, CoA

  • No. 88355 Centre, clamping circuit 25-80, CoA

  • No. 88480 Adapter plate, short taper 5, external-Ø 140, without spring set, DIN 55027

  • No. 88481 Adapter plate, short taper 6, external-Ø 167, without spring set, DIN 55027

  • No. 88482 Adapter plate, short taper 8, external-Ø 216, without spring set, DIN 55027

  • No. 88483 Adapter plate, short taper 11, external-Ø 280, without spring set, DIN 55027

  • No. 88485 Adapter plate, short taper 5, external-Ø 140, without spring set, DIN 55026

  • No. 88486 Adapter plate, short taper 6, external-Ø 167, without spring set, DIN 55026

  • No. 88487 Adapter plate, short taper 8, external-Ø 216, without spring set, DIN 55026

  • No. 88488 Adapter plate, short taper 11, external-Ø 280, without spring set, DIN 55026

  • No. 88495 Adapter plate, short taper 5, external-Ø 140, without spring set, DIN 55029

  • No. 88496 Adapter plate, short taper 6, external-Ø 167, without spring set, DIN 55029

  • No. 88497 Adapter plate, short taper 8, external-Ø 216, without spring set, DIN 55029

  • No. 88498 Adapter plate, short taper 11, external-Ø 280, without spring set, DIN 55029

  • No. 88501 Constant face driver, small assortment in wooden box hydraulic, clamping circuit 12-50, turning range 13-100 mm, MT 3, right-hand rotation, CoA

  • No. 88502 Constant face driver, small assortment in wooden box hydraulic, clamping circuit 12-50, turning range 13-100 mm, MT 4, right-hand rotation, CoA

  • No. 88503 Constant face driver, small assortment in wooden box hydraulic, clamping circuit 12-50, turning range 13-100 mm, MT 5, right-hand rotation, CoA

  • No. 88504 Constant face driver, small assortment in wooden box hydraulic, clamping circuit 12-50, turning range 13-100 mm, MT 6, right-hand rotation, CoA

  • No. 88511 Constant face driver, small assortment in wooden box hydraulic, clamping circuit 12-50, turning range 13-100 mm, MT 3, right-hand rotation, with draw-off nut, CoA

  • No. 88512 Constant face driver, small assortment in wooden box hydraulic, clamping circuit 12-50, turning range 13-100 mm, MT 4, right-hand rotation, with draw-off nut, CoA

  • No. 88513 Constant face driver, small assortment in wooden box hydraulic, clamping circuit 12-50, turning range 13-100 mm, MT 5, right-hand rotation, with draw-off nut, CoA

  • No. 88514 Constant face driver, small assortment in wooden box hydraulic, clamping circuit 12-50, turning range 13-100 mm, MT 6, right-hand rotation, with draw-off nut, CoA

  • No. 88521 Constant face driver, small assortment in wooden box hydraulic, clamping circuit 12-50, turning range 13-100 mm, MT 3, left-hand rotation, CoA

  • No. 88522 Constant face driver, small assortment in wooden box hydraulic, clamping circuit 12-50, turning range 13-100 mm, MT 4, left-hand rotation, CoA

  • No. 88523 Constant face driver, small assortment in wooden box hydraulic, clamping circuit 12-50, turning range 13-100 mm, MT 5, left-hand rotation, CoA

  • No. 88524 Constant face driver, small assortment in wooden box hydraulic, clamping circuit 12-50, turning range 13-100 mm, MT 6, left-hand rotation, CoA

  • No. 88531 Constant face driver, small assortment in wooden box hydraulic, clamping circuit 12-50, turning range 13-100 mm, MT 3, left-hand rotation, with draw-off nut, CoA

  • No. 88532 Constant face driver, small assortment in wooden box hydraulic, clamping circuit 12-50, turning range 13-100 mm, MT 4, left-hand rotation, with draw-off nut, CoA

  • No. 88533 Constant face driver, small assortment in wooden box hydraulic, clamping circuit 12-50, turning range 13-100 mm, MT 5, left-hand rotation, with draw-off nut, CoA

  • No. 88534 Constant face driver, small assortment in wooden box hydraulic, clamping circuit 12-50, turning range 13-100 mm, MT 6, left-hand rotation, with draw-off nut, CoA

  • No. 88541 Driving discs, clamping circuit 8, toothed, right- and left-hand rotation

  • No. 88542 Driving discs, clamping circuit 10, toothed, right- and left-hand rotation

  • No. 88543 Driving discs, clamping circuit 12, toothed, right- and left-hand rotation

  • No. 88544 Driving discs, clamping circuit 16, toothed, right- and left-hand rotation

  • No. 88545 Driving discs, clamping circuit 20 H, with interchangeable hard metal driving plates 6 x 3,2, right- and left-hand rotation

  • No. 88546 Driving discs, clamping circuit 25 H, with interchangeable hard metal driving plates 6 x 3,2, right- and left-hand rotation

  • No. 88547 Driving discs, clamping circuit 32 H, with interchangeable hard metal driving plates 6 x 3,2, right- and left-hand rotation

  • No. 88548 Driving discs, clamping circuit 40, with interchangeable, hard metal driving plates 9,5 x 3,2 which can be used on 4 sides , right- and left-hand rotation

  • No. 88549 Driving discs, clamping circuit 50, with interchangeable, hard metal driving plates 9,5 x 3,2 which can be used on 4 sides , right- and left-hand rotation

  • No. 88550 Driving discs, clamping circuit 63, with interchangeable, hard metal driving plates 9,5 x 3,2 which can be used on 4 sides , right- and left-hand rotation

  • No. 88551 Driving discs, clamping circuit 80, with interchangeable, hard metal driving plates 9,5 x 3,2 which can be used on 4 sides , right- and left-hand rotation

  • No. 88553 Constant face driver, basic equipment in a carton hydraulic, clamping circuit 12 + 32 mm, turning range 13-64mm, MT 3, right-hand rotation, CoA

  • No. 88554 Constant face driver, basic equipment in a carton hydraulic, clamping circuit 12 + 32 mm, turning range 13-64mm, MT 4, right-hand rotation, CoA

  • No. 88555 Constant face driver, basic equipment in a carton hydraulic, clamping circuit 12 + 32 mm, turning range 13-64mm, MT 5, right-hand rotation, CoA

  • No. 88556 Constant face driver, basic equipment in a carton hydraulic, clamping circuit 12 + 32 mm, turning range 13-64mm, MT 6, right-hand rotation, CoA

  • No. 88557 Constant face driver, basic equipment in a carton hydraulic, clamping circuit 12 + 32 mm, turning range 13-64mm, MT 3, right-hand rotation, with draw-off nut, CoA

  • No. 88558 Constant face driver, basic equipment in a carton hydraulic, clamping circuit 12 + 32 mm, turning range 13-64mm, MT 4, right-hand rotation, with draw-off nut, CoA

  • No. 88559 Constant face driver, basic equipment in a carton hydraulic, clamping circuit 12 + 32 mm, turning range 13-64mm, MT 5, right-hand rotation, with draw-off nut, CoA

  • No. 88560 Constant face driver, basic equipment in a carton hydraulic, clamping circuit 12 + 32 mm, turning range 13-64mm, MT 6, right-hand rotation, with draw-off nut, CoA

  • No. 88573 Constant face driver, basic equipment in a carton hydraulic, clamping circuit 12 + 32 mm, turning range 13-64mm, MT 3, left-hand rotation, CoA

  • No. 88574 Constant face driver, basic equipment in a carton hydraulic, clamping circuit 12 + 32 mm, turning range 13-64mm, MT 4, left-hand rotation, CoA

  • No. 88575 Constant face driver, basic equipment in a carton hydraulic, clamping circuit 12 + 32 mm, turning range 13-64mm, MT 5, left-hand rotation, CoA

  • No. 88576 Constant face driver, basic equipment in a carton hydraulic, clamping circuit 12 + 32 mm, turning range 13-64mm, MT 6, left-hand rotation, CoA

  • No. 88577 Constant face driver, basic equipment in a carton hydraulic, clamping circuit 12 + 32 mm, turning range 13-64mm, MT 3, left-hand rotation, with draw-off nut, CoA

  • No. 88578 Constant face driver, basic equipment in a carton hydraulic, clamping circuit 12 + 32 mm, turning range 13-64mm, MT 4, left-hand rotation, with draw-off nut, CoA

  • No. 88579 Constant face driver, basic equipment in a carton hydraulic, clamping circuit 12 + 32 mm, turning range 13-64mm, MT 5, left-hand rotation, with draw-off nut, CoA

  • No. 88580 Constant face driver, basic equipment in a carton hydraulic, clamping circuit 12 + 32 mm, turning range 13-64mm, MT 6, left-hand rotation, with draw-off nut, CoA

  • No. 88810 Hard metal driving plates, Size 6x3,2, right- oder left-hand rotation,

  • No. 88970 Hard metal driving plates, Size 6x3,2, right- and left-hand rotation,

  • No. 89065 Driving discs, clamping circuit 20 H, with interchangeable hard metal driving plates 6 x 3,2, right-hand rotation

  • No. 89066 Driving discs, clamping circuit 25 H, with interchangeable hard metal driving plates 6 x 3,2, right-hand rotation

  • No. 89067 Driving discs, clamping circuit 32 H, with interchangeable hard metal driving plates 6 x 3,2, right-hand rotation

  • No. 89085 Driving discs, clamping circuit 20 H, with interchangeable hard metal driving plates 6 x 3,2, left-hand rotation

  • No. 89086 Driving discs, clamping circuit 25 H, with interchangeable hard metal driving plates 6 x 3,2, left-hand rotation

  • No. 89087 Driving discs, clamping circuit 32 H, with interchangeable hard metal driving plates 6 x 3,2, left-hand rotation

  • No. 90089 Revolving tailstock center - Tip angle 60°, Mount MT 3, Size 104, HM carbide-tipped

  • No. 90483 Revolving centering taper, Mount MT 5, Size 173b, bull nose, 60°

  • No. 93306 Revolving tailstock center - Tip angle 60°, Mount MT 4, Size 108, HM carbide-tipped

  • No. 93439 Revolving tailstock center - Tip angle 60°, Mount MT 6, Size 116, H body hardened and ground

  • No. 93440 Revolving tailstock center - Tip angle 60°, Mount Metr. 80, without draw-off nut

  • No. 94008 A 28: Unstepped top jaw AB, 3-jaw set standard design, soft, material 16MnCr5

  • No. 94009 A 28: Unstepped top jaw AB, 3-jaw set standard design, soft, material 16MnCr5

  • No. 94010 A 28: Unstepped top jaw AB, 3-jaw set standard design, soft, material 16MnCr5

  • No. 94011 A 28: Unstepped top jaw AB, 3-jaw set standard design, soft, material 16MnCr5

  • No. 94012 A 36: Reversible top jaws, 3-jaw set, hardened tongue and groove for external and internal clamping - Material: 16 MnCr 5

  • No. 94013 A 36: Reversible top jaws, 3-jaw set, hardened tongue and groove for external and internal clamping - Material: 16 MnCr 5

  • No. 94014 A 36: Reversible top jaws, 3-jaw set, hardened tongue and groove for external and internal clamping - Material: 16 MnCr 5

  • No. 94015 A 36: Reversible top jaws, 3-jaw set, hardened tongue and groove for external and internal clamping - Material: 16 MnCr 5

  • No. 94045 A 36: Reversible top jaws, 3-jaw set, hardened tongue and groove for external and internal clamping - Material: 16 MnCr 5

  • No. 94046 A 28: Unstepped top jaw AB, 3-jaw set standard design, soft, material 16MnCr5

  • No. 96618 S18 Drill chuck key, K7 equivalent

  • No. 100000 Self-centering Geared Scroll Lathe Chuck ZG, size 200, 3-jaw, cast iron body, one piece jaws sets for OD and ID clamping, DIN 6350 flat back mount.

  • No. 100152 Self-centering Geared Scroll Lathe Chuck ZS, One-piece jaws, size 200, 3-jaw. Steel body. DIN 55027 -5 spindle mount with studs and lock-nuts.

  • No. 100155 Self-centering Geared Scroll Lathe Chuck ZSU, Base jaws and reversible top jaws, size 200, 3-jaw. Steel body. DIN 55027 -5 spindle mount with studs and lock-nuts.

  • No. 100156 Self-centering Geared Scroll Lathe Chuck ZS, One-piece jaws, size 200, 3-jaw. Steel body. DIN 55027 -6 spindle mount with studs and lock-nuts.

  • No. 100159 Self-centering Geared Scroll Lathe Chuck ZSU, Base jaws and reversible top jaws, size 200, 3-jaw. Steel body. DIN 55027 -6 spindle mount with studs and lock-nuts.

  • No. 100186 Self-centering Geared Scroll Lathe Chuck ZS, One-piece jaws, size 200, 3-jaw, steel body, DIN 6350 flat back mount.

  • No. 100189 Self-centering Geared Scroll Lathe Chuck ZSU, Base jaws and reversible top jaws, size 200, 3-jaw, steel body, DIN 6350 flat back mount.

  • No. 100194 Self-centering Geared Scroll Lathe Chuck ZSU, Base jaws and reversible top jaws, size 200, 3-jaw, Steel Body, DIN 6350 flat back, Base jaws and reversible top jaws, US Standard T&G.

  • No. 100198 Self-centering Geared Scroll Lathe Chuck ZSU, Base jaws and reversible top jaws, size 200, 3-jaw, Steel Body, DIN 55026 A2-5 Spindle Mount, Base jaws and reversible top jaws, US Standard T&G.

  • No. 100200 Self-centering Geared Scroll Lathe Chuck ZG, size 250, 3-jaw, cast iron body, one piece jaws sets for OD and ID clamping, DIN 6350 flat back mount.

  • No. 100300 Self-centering Geared Scroll Lathe Chuck ZG, size 160, 3-jaw, cast iron body, one piece jaws sets for OD and ID clamping, DIN 6350 flat back mount.

  • No. 100325 Self-centering Geared Scroll Lathe Chuck ZG, size 160, 4-jaw, cast iron body, one piece jaws sets for OD and ID clamping, DIN 6350 flat back mount.

  • No. 100403 Self-centering Geared Scroll Lathe Chuck ZSU, Base jaws and reversible top jaws, size 200, 3-jaw, Steel Body, DIN 55026 A2-6 Spindle Mount, Base jaws and reversible top jaws, US Standard T&G.

  • No. 100407 Self-centering Geared Scroll Lathe Chuck ZSU, Base jaws and reversible top jaws, size 200, 3-jaw, Steel Body, DIN 55029 D1-5 Camlock Spindle Mount, Base jaws and reversible top jaws, US Standard T&G.

  • No. 100414 Self-centering Geared Scroll Lathe Chuck ZSU, Base jaws and reversible top jaws, size 200, 3-jaw, Steel Body, DIN 55029 D1-3 Camlock Spindle Mount, Base jaws and reversible top jaws, US Standard T&G.

  • No. 100418 Self-centering Geared Scroll Lathe Chuck ZSU, Base jaws and reversible top jaws, size 200, 3-jaw, Steel Body, DIN 55029 D1-4 Camlock Spindle Mount, Base jaws and reversible top jaws, US Standard T&G.

  • No. 100425 Self-centering Geared Scroll Lathe Chuck ZSU, Base jaws and reversible top jaws, size 200, 3-jaw, Steel Body, DIN 55029 D1-6 Camlock Spindle Mount, Base jaws and reversible top jaws, US Standard T&G.

  • No. 100465 Self-centering Geared Scroll Lathe Chuck ZG, size 200, 4-jaw, cast iron body, one piece jaws sets for OD and ID clamping, DIN 6350 flat back mount.

  • No. 100466 Self-centering Geared Scroll Lathe Chuck ZS, One-piece jaws, size 200, 4-jaw, steel body, DIN 6350 flat back mount.

  • No. 100472 Self-centering Geared Scroll Lathe Chuck ZS, One-piece jaws, size 200, 4-jaw. Steel body. DIN 55027 -5 spindle mount with studs and lock-nuts.

  • No. 100484 Self-centering Geared Scroll Lathe Chuck ZSU, Base jaws and reversible top jaws, size 200, 4-jaw, steel body, DIN 6350 flat back mount.

  • No. 100533 Self-centering Geared Scroll Lathe Chuck ZS, One-piece jaws, size 250, 3-jaw, steel body, DIN 6350 flat back mount.

  • No. 100541 Self-centering Geared Scroll Lathe Chuck ZSU, Base jaws and reversible top jaws, size 250, 3-jaw, steel body, DIN 6350 flat back mount.

  • No. 100542 Self-centering Geared Scroll Lathe Chuck ZSU, Base jaws and reversible top jaws, size 250, 3-jaw, Steel Body, DIN 6350 flat back, Base jaws and reversible top jaws, US Standard T&G.

  • No. 100555 Self-centering Geared Scroll Lathe Chuck ZS, One-piece jaws, size 250, 3-jaw. Steel body. DIN 55027 -6 spindle mount with studs and lock-nuts.

  • No. 100556 Self-centering Geared Scroll Lathe Chuck ZS, One-piece jaws, size 250, 3-jaw. Steel body. DIN 55027 -8 spindle mount with studs and lock-nuts.

  • No. 100564 Self-centering Geared Scroll Lathe Chuck ZSU, Base jaws and reversible top jaws, size 250, 3-jaw. Steel body. DIN 55027 -6 spindle mount with studs and lock-nuts.

  • No. 100565 Self-centering Geared Scroll Lathe Chuck ZSU, Base jaws and reversible top jaws, size 250, 3-jaw. Steel body. DIN 55027 -8 spindle mount with studs and lock-nuts.

  • No. 100590 Self-centering Geared Scroll Lathe Chuck ZSU, Base jaws and reversible top jaws, size 250, 3-jaw, Steel Body, DIN 55026 A2-6 Spindle Mount, Base jaws and reversible top jaws, US Standard T&G.

  • No. 100591 Self-centering Geared Scroll Lathe Chuck ZSU, Base jaws and reversible top jaws, size 250, 3-jaw, Steel Body, DIN 55026 A2-8 Spindle Mount, Base jaws and reversible top jaws, US Standard T&G.

  • No. 100592 Self-centering Geared Scroll Lathe Chuck ZSU, Base jaws and reversible top jaws, size 250, 3-jaw, Steel Body, DIN 55026 A2-5 Spindle Mount, Base jaws and reversible top jaws, US Standard T&G.

  • No. 100717 Self-centering Geared Scroll Lathe Chuck ZS, One-piece jaws, size 160, 3-jaw, steel body, DIN 6350 flat back mount.

  • No. 100725 Self-centering Geared Scroll Lathe Chuck ZSU, Base jaws and reversible top jaws, size 160, 3-jaw, steel body, DIN 6350 flat back mount.

  • No. 100726 Self-centering Geared Scroll Lathe Chuck ZSU, Base jaws and reversible top jaws, size 160, 3-jaw, Steel Body, DIN 6350 flat back, Base jaws and reversible top jaws, US Standard T&G.

  • No. 100740 Self-centering Geared Scroll Lathe Chuck ZS, One-piece jaws, size 160, 3-jaw. Steel body. DIN 55027 -4 spindle mount with studs and lock-nuts.

  • No. 100743 Self-centering Geared Scroll Lathe Chuck ZSU, Base jaws and reversible top jaws, size 160, 3-jaw. Steel body. DIN 55027 -4 spindle mount with studs and lock-nuts.

  • No. 100744 Self-centering Geared Scroll Lathe Chuck ZS, One-piece jaws, size 160, 3-jaw. Steel body. DIN 55027 -5 spindle mount with studs and lock-nuts.

  • No. 100747 Self-centering Geared Scroll Lathe Chuck ZSU, Base jaws and reversible top jaws, size 160, 3-jaw. Steel body. DIN 55027 -5 spindle mount with studs and lock-nuts.

  • No. 100762 Self-centering Geared Scroll Lathe Chuck ZSU, Base jaws and reversible top jaws, size 160, 3-jaw, Steel Body, DIN 55026 A2-5 Spindle Mount, Base jaws and reversible top jaws, US Standard T&G.

  • No. 100766 Self-centering Geared Scroll Lathe Chuck ZSU, Base jaws and reversible top jaws, size 160, 3-jaw, Steel Body, DIN 55029 D1-4 Camlock Spindle Mount, Base jaws and reversible top jaws, US Standard T&G.

  • No. 100770 Self-centering Geared Scroll Lathe Chuck ZSU, Base jaws and reversible top jaws, size 160, 3-jaw, Steel Body, DIN 55029 D1-5 Camlock Spindle Mount, Base jaws and reversible top jaws, US Standard T&G.

  • No. 100802 Self-centering Geared Scroll Lathe Chuck ZSU, Base jaws and reversible top jaws, size 250, 3-jaw, Steel Body, DIN 55029 D1-6 Camlock Spindle Mount, Base jaws and reversible top jaws, US Standard T&G.

  • No. 100803 Self-centering Geared Scroll Lathe Chuck ZSU, Base jaws and reversible top jaws, size 250, 3-jaw, Steel Body, DIN 55029 D1-8 Camlock Spindle Mount, Base jaws and reversible top jaws, US Standard T&G.

  • No. 100804 Self-centering Geared Scroll Lathe Chuck ZSU, Base jaws and reversible top jaws, size 250, 3-jaw, Steel Body, DIN 55029 D1-5 Camlock Spindle Mount, Base jaws and reversible top jaws, US Standard T&G.

  • No. 100834 Self-centering Geared Scroll Lathe Chuck ZG, size 250, 4-jaw, cast iron body, one piece jaws sets for OD and ID clamping, DIN 6350 flat back mount.

  • No. 101030 Self-centering Geared Scroll Lathe Chuck ZS, One-piece jaws, size 250, 4-jaw, steel body, DIN 6350 flat back mount.

  • No. 101036 Self-centering Geared Scroll Lathe Chuck ZSU, Base jaws and reversible top jaws, size 250, 4-jaw, steel body, DIN 6350 flat back mount.

  • No. 101050 Self-centering Geared Scroll Lathe Chuck ZS, One-piece jaws, size 250, 4-jaw. Steel body. DIN 55027 -6 spindle mount with studs and lock-nuts.

  • No. 101051 Self-centering Geared Scroll Lathe Chuck ZS, One-piece jaws, size 250, 4-jaw. Steel body. DIN 55027 -8 spindle mount with studs and lock-nuts.

  • No. 101059 Self-centering Geared Scroll Lathe Chuck ZSU, Base jaws and reversible top jaws, size 250, 4-jaw. Steel body. DIN 55027 -6 spindle mount with studs and lock-nuts.

  • No. 101060 Self-centering Geared Scroll Lathe Chuck ZSU, Base jaws and reversible top jaws, size 250, 4-jaw. Steel body. DIN 55027 -8 spindle mount with studs and lock-nuts.

  • No. 101164 Self-centering Geared Scroll Lathe Chuck ZS, One-piece jaws, size 160, 4-jaw, steel body, DIN 6350 flat back mount.

  • No. 101170 Self-centering Geared Scroll Lathe Chuck ZSU, Base jaws and reversible top jaws, size 160, 4-jaw, steel body, DIN 6350 flat back mount.

  • No. 101184 Self-centering Geared Scroll Lathe Chuck ZS, One-piece jaws, size 160, 4-jaw. Steel body. DIN 55027 -4 spindle mount with studs and lock-nuts.

  • No. 101187 Self-centering Geared Scroll Lathe Chuck ZSU, Base jaws and reversible top jaws, size 160, 4-jaw. Steel body. DIN 55027 -4 spindle mount with studs and lock-nuts.

  • No. 101188 Self-centering Geared Scroll Lathe Chuck ZS, One-piece jaws, size 160, 4-jaw. Steel body. DIN 55027 -5 spindle mount with studs and lock-nuts.

  • No. 101191 Self-centering Geared Scroll Lathe Chuck ZSU, Base jaws and reversible top jaws, size 160, 4-jaw. Steel body. DIN 55027 -5 spindle mount with studs and lock-nuts.

  • No. 101248 Self-centering Geared Scroll Lathe Chuck ZG, size 315, 3-jaw, cast iron body, one piece jaws sets for OD and ID clamping, DIN 6350 flat back mount.

  • No. 101344 Self-centering Geared Scroll Lathe Chuck ZS, One-piece jaws, size 315, 3-jaw, steel body, DIN 6350 flat back mount.

  • No. 101350 Self-centering Geared Scroll Lathe Chuck ZSU, Base jaws and reversible top jaws, size 315, 3-jaw, steel body, DIN 6350 flat back mount.

  • No. 101351 Self-centering Geared Scroll Lathe Chuck ZSU, Base jaws and reversible top jaws, size 315, 3-jaw, Steel Body, DIN 6350 flat back, Base jaws and reversible top jaws, US Standard T&G.

  • No. 101364 Self-centering Geared Scroll Lathe Chuck ZS, One-piece jaws, size 315, 3-jaw. Steel body. DIN 55027 -6 spindle mount with studs and lock-nuts.

  • No. 101365 Self-centering Geared Scroll Lathe Chuck ZS, One-piece jaws, size 315, 3-jaw. Steel body. DIN 55027 -8 spindle mount with studs and lock-nuts.

  • No. 101366 Self-centering Geared Scroll Lathe Chuck ZS, One-piece jaws, size 315, 3-jaw. Steel body. DIN 55027 -11 spindle mount with studs and lock-nuts.

  • No. 101373 Self-centering Geared Scroll Lathe Chuck ZSU, Base jaws and reversible top jaws, size 315, 3-jaw. Steel body. DIN 55027 -6 spindle mount with studs and lock-nuts.

  • No. 101374 Self-centering Geared Scroll Lathe Chuck ZSU, Base jaws and reversible top jaws, size 315, 3-jaw. Steel body. DIN 55027 -8 spindle mount with studs and lock-nuts.

  • No. 101375 Self-centering Geared Scroll Lathe Chuck ZSU, Base jaws and reversible top jaws, size 315, 3-jaw. Steel body. DIN 55027 -11 spindle mount with studs and lock-nuts.

  • No. 101397 Self-centering Geared Scroll Lathe Chuck ZSU, Base jaws and reversible top jaws, size 315, 3-jaw, Steel Body, DIN 55026 A2-6 Spindle Mount, Base jaws and reversible top jaws, US Standard T&G.

  • No. 101398 Self-centering Geared Scroll Lathe Chuck ZSU, Base jaws and reversible top jaws, size 315, 3-jaw, Steel Body, DIN 55026 A2-8 Spindle Mount, Base jaws and reversible top jaws, US Standard T&G.

  • No. 101420 Self-centering Geared Scroll Lathe Chuck ZSU, Base jaws and reversible top jaws, size 200, 4-jaw. Steel body. DIN 55027 -5 spindle mount with studs and lock-nuts.

  • No. 101422 Self-centering Geared Scroll Lathe Chuck ZS, One-piece jaws, size 200, 4-jaw. Steel body. DIN 55027 -6 spindle mount with studs and lock-nuts.

  • No. 101428 Self-centering Geared Scroll Lathe Chuck ZSU, Base jaws and reversible top jaws, size 200, 4-jaw. Steel body. DIN 55027 -6 spindle mount with studs and lock-nuts.

  • No. 101509 Self-centering Geared Scroll Lathe Chuck ZSU, Base jaws and reversible top jaws, size 315, 3-jaw, Steel Body, DIN 55029 D1-6 Camlock Spindle Mount, Base jaws and reversible top jaws, US Standard T&G.

  • No. 101510 Self-centering Geared Scroll Lathe Chuck ZSU, Base jaws and reversible top jaws, size 315, 3-jaw, Steel Body, DIN 55029 D1-8 Camlock Spindle Mount, Base jaws and reversible top jaws, US Standard T&G.

  • No. 101511 Self-centering Geared Scroll Lathe Chuck ZSU, Base jaws and reversible top jaws, size 315, 3-jaw, Steel Body, DIN 55029 D1-11 Camlock Spindle Mount, Base jaws and reversible top jaws, US Standard T&G.

  • No. 101567 Self-centering Geared Scroll Lathe Chuck ZG, size 315, 4-jaw, cast iron body, one piece jaws sets for OD and ID clamping, DIN 6350 flat back mount.

  • No. 101598 Self-centering Geared Scroll Lathe Chuck ZS, One-piece jaws, size 315, 4-jaw, steel body, DIN 6350 flat back mount.

  • No. 101628 Self-centering Geared Scroll Lathe Chuck ZG, size 125, 3-jaw, cast iron body, one piece jaws sets for OD and ID clamping, DIN 6350 flat back mount.

  • No. 101672 Self-centering Geared Scroll Lathe Chuck ZS, One-piece jaws, size 125, 3-jaw, steel body, DIN 6350 flat back mount.

  • No. 101678 Self-centering Geared Scroll Lathe Chuck ZSU, Base jaws and reversible top jaws, size 125, 3-jaw, steel body, DIN 6350 flat back mount.

  • No. 101679 Self-centering Geared Scroll Lathe Chuck ZSU, Base jaws and reversible top jaws, size 125, 3-jaw, Steel Body, DIN 6350 flat back, Base jaws and reversible top jaws, US Standard T&G.

  • No. 101692 Self-centering Geared Scroll Lathe Chuck ZS, One-piece jaws, size 125, 3-jaw. Steel body. DIN 55027 -4 spindle mount with studs and lock-nuts.

  • No. 101695 Self-centering Geared Scroll Lathe Chuck ZSU, Base jaws and reversible top jaws, size 125, 3-jaw. Steel body. DIN 55027 -4 spindle mount with studs and lock-nuts.

  • No. 101699 Self-centering Geared Scroll Lathe Chuck ZSU, Base jaws and reversible top jaws, size 125, 3-jaw, Steel Body, DIN 55029 D1-3 Camlock Spindle Mount, Base jaws and reversible top jaws, US Standard T&G.

  • No. 101703 Self-centering Geared Scroll Lathe Chuck ZSU, Base jaws and reversible top jaws, size 125, 3-jaw, Steel Body, DIN 55029 D1-4 Camlock Spindle Mount, Base jaws and reversible top jaws, US Standard T&G.

  • No. 101781 Self-centering Geared Scroll Lathe Chuck ZG, size 100, 3-jaw, cast iron body, one piece jaws sets for OD and ID clamping, DIN 6350 flat back mount.

  • No. 101782 Self-centering Geared Scroll Lathe Chuck ZS, One-piece jaws, size 100, 3-jaw, steel body, DIN 6350 flat back mount.

  • No. 101788 Self-centering Geared Scroll Lathe Chuck ZSU, Base jaws and reversible top jaws, size 100, 3-jaw, steel body, DIN 6350 flat back mount.

  • No. 101796 Self-centering Geared Scroll Lathe Chuck ZSU, Base jaws and reversible top jaws, size 100, 3-jaw, Steel Body, DIN 6350 flat back, Base jaws and reversible top jaws, US Standard T&G.

  • No. 101876 Self-centering Geared Scroll Lathe Chuck ZS, One-piece jaws, size 400, 4-jaw. Steel body. DIN 55027 -8 spindle mount with studs and lock-nuts.

  • No. 101882 Self-centering Geared Scroll Lathe Chuck ZSU, Base jaws and reversible top jaws, size 400, 4-jaw. Steel body. DIN 55027 -8 spindle mount with studs and lock-nuts.

  • No. 101884 Self-centering Geared Scroll Lathe Chuck ZS, One-piece jaws, size 400, 4-jaw. Steel body. DIN 55027 -11 spindle mount with studs and lock-nuts.

  • No. 101890 Self-centering Geared Scroll Lathe Chuck ZSU, Base jaws and reversible top jaws, size 400, 4-jaw. Steel body. DIN 55027 -11 spindle mount with studs and lock-nuts.

  • No. 101901 Self-centering Geared Scroll Lathe Chuck ZSU, Base jaws and reversible top jaws, size 315, 4-jaw, steel body, DIN 6350 flat back mount.

  • No. 101919 Self-centering Geared Scroll Lathe Chuck ZS, One-piece jaws, size 315, 4-jaw. Steel body. DIN 55027 -6 spindle mount with studs and lock-nuts.

  • No. 101922 Self-centering Geared Scroll Lathe Chuck ZSU, Base jaws and reversible top jaws, size 315, 4-jaw. Steel body. DIN 55027 -6 spindle mount with studs and lock-nuts.

  • No. 101923 Self-centering Geared Scroll Lathe Chuck ZS, One-piece jaws, size 315, 4-jaw. Steel body. DIN 55027 -8 spindle mount with studs and lock-nuts.

  • No. 101926 Self-centering Geared Scroll Lathe Chuck ZSU, Base jaws and reversible top jaws, size 315, 4-jaw. Steel body. DIN 55027 -8 spindle mount with studs and lock-nuts.

  • No. 101927 Self-centering Geared Scroll Lathe Chuck ZS, One-piece jaws, size 315, 4-jaw. Steel body. DIN 55027 -11 spindle mount with studs and lock-nuts.

  • No. 101930 Self-centering Geared Scroll Lathe Chuck ZSU, Base jaws and reversible top jaws, size 315, 4-jaw. Steel body. DIN 55027 -11 spindle mount with studs and lock-nuts.

  • No. 102062 Self-centering Geared Scroll Lathe Chuck ZS, One-piece jaws, size 400, 3-jaw, steel body, DIN 6350 flat back mount.

  • No. 102068 Self-centering Geared Scroll Lathe Chuck ZSU, Base jaws and reversible top jaws, size 400, 3-jaw, steel body, DIN 6350 flat back mount.

  • No. 102076 Self-centering Geared Scroll Lathe Chuck ZSU, Base jaws and reversible top jaws, size 400, 3-jaw, Steel Body, DIN 6350 flat back, Base jaws and reversible top jaws, US Standard T&G.

  • No. 102129 Self-centering Geared Scroll Lathe Chuck ZG, size 100, 4-jaw, cast iron body, one piece jaws sets for OD and ID clamping, DIN 6350 flat back mount.

  • No. 102130 Self-centering Geared Scroll Lathe Chuck ZS, One-piece jaws, size 100, 4-jaw, steel body, DIN 6350 flat back mount.

  • No. 102136 Self-centering Geared Scroll Lathe Chuck ZSU, Base jaws and reversible top jaws, size 100, 4-jaw, steel body, DIN 6350 flat back mount.

  • No. 102202 Self-centering Geared Scroll Lathe Chuck ZS, One-piece jaws, size 400, 3-jaw. Steel body. DIN 55027 -8 spindle mount with studs and lock-nuts.

  • No. 102208 Self-centering Geared Scroll Lathe Chuck ZSU, Base jaws and reversible top jaws, size 400, 3-jaw. Steel body. DIN 55027 -8 spindle mount with studs and lock-nuts.

  • No. 102210 Self-centering Geared Scroll Lathe Chuck ZS, One-piece jaws, size 400, 3-jaw. Steel body. DIN 55027 -11 spindle mount with studs and lock-nuts.

  • No. 102216 Self-centering Geared Scroll Lathe Chuck ZSU, Base jaws and reversible top jaws, size 400, 3-jaw. Steel body. DIN 55027 -11 spindle mount with studs and lock-nuts.

  • No. 102248 Self-centering Geared Scroll Lathe Chuck ZSU, Base jaws and reversible top jaws, size 400, 3-jaw, Steel Body, DIN 55026 A2-6 Spindle Mount, Base jaws and reversible top jaws, US Standard T&G.

  • No. 102256 Self-centering Geared Scroll Lathe Chuck ZSU, Base jaws and reversible top jaws, size 400, 3-jaw, Steel Body, DIN 55026 A2-8 Spindle Mount, Base jaws and reversible top jaws, US Standard T&G.

  • No. 102264 Self-centering Geared Scroll Lathe Chuck ZSU, Base jaws and reversible top jaws, size 400, 3-jaw, Steel Body, DIN 55029 D1-8 Camlock Spindle Mount, Base jaws and reversible top jaws, US Standard T&G.

  • No. 102272 Self-centering Geared Scroll Lathe Chuck ZSU, Base jaws and reversible top jaws, size 400, 3-jaw, Steel Body, DIN 55029 D1-11 Camlock Spindle Mount, Base jaws and reversible top jaws, US Standard T&G.

  • No. 102280 Self-centering Geared Scroll Lathe Chuck ZSU, Base jaws and reversible top jaws, size 400, 3-jaw, Steel Body, DIN 55029 D1-6 Camlock Spindle Mount, Base jaws and reversible top jaws, US Standard T&G.

  • No. 102330 Self-centering Geared Scroll Lathe Chuck ZS, One-piece jaws, size 400, 4-jaw, steel body, DIN 6350 flat back mount.

  • No. 102505 Self-centering Geared Scroll Lathe Chuck ZS, One-piece jaws, size 80, 4-jaw, steel body, DIN 6350 flat back mount.

  • No. 102513 Self-centering Geared Scroll Lathe Chuck ZS, One-piece jaws, size 80, 3-jaw, steel body, DIN 6350 flat back mount.

  • No. 102548 Self-centering Geared Scroll Lathe Chuck ZS, One-piece jaws, size 500, 3-jaw. Steel body. DIN 55027 -11 spindle mount with studs and lock-nuts.

  • No. 102554 Self-centering Geared Scroll Lathe Chuck ZSU, Base jaws and reversible top jaws, size 500, 3-jaw. Steel body. DIN 55027 -11 spindle mount with studs and lock-nuts.

  • No. 102555 Self-centering Geared Scroll Lathe Chuck ZS, One-piece jaws, size 500, 3-jaw, steel body, DIN 6350 flat back mount.

  • No. 102576 Self-centering Geared Scroll Lathe Chuck ZSU, Base jaws and reversible top jaws, size 500, 3-jaw, Steel Body, DIN 55026 A2-11 Spindle Mount, Base jaws and reversible top jaws, US Standard T&G.

  • No. 102584 Self-centering Geared Scroll Lathe Chuck ZSU, Base jaws and reversible top jaws, size 500, 3-jaw, Steel Body, DIN 55029 D1-11 Camlock Spindle Mount, Base jaws and reversible top jaws, US Standard T&G.

  • No. 102585 Self-centering Geared Scroll Lathe Chuck ZSU, Base jaws and reversible top jaws, size 500, 3-jaw, steel body, DIN 6350 flat back mount.

  • No. 102586 Self-centering Geared Scroll Lathe Chuck ZSU, Base jaws and reversible top jaws, size 500, 3-jaw, Steel Body, DIN 6350 flat back, Base jaws and reversible top jaws, US Standard T&G.

  • No. 102720 Self-centering Geared Scroll Lathe Chuck ZS, One-piece jaws, size 630, 3-jaw, steel body, DIN 6350 flat back mount.

  • No. 102726 Self-centering Geared Scroll Lathe Chuck ZSU, Base jaws and reversible top jaws, size 630, 3-jaw, steel body, DIN 6350 flat back mount.

  • No. 102734 Self-centering Geared Scroll Lathe Chuck ZSU, Base jaws and reversible top jaws, size 630, 3-jaw, Steel Body, DIN 6350 flat back, Base jaws and reversible top jaws, US Standard T&G.

  • No. 102752 Self-centering Geared Scroll Lathe Chuck ZS, One-piece jaws, size 630, 3-jaw. Steel body. DIN 55027 -11 spindle mount with studs and lock-nuts.

  • No. 102758 Self-centering Geared Scroll Lathe Chuck ZSU, Base jaws and reversible top jaws, size 630, 3-jaw. Steel body. DIN 55027 -11 spindle mount with studs and lock-nuts.

  • No. 102760 Self-centering Geared Scroll Lathe Chuck ZS, One-piece jaws, size 630, 3-jaw. Steel body. DIN 55027 -15 spindle mount with studs and lock-nuts.

  • No. 102766 Self-centering Geared Scroll Lathe Chuck ZSU, Base jaws and reversible top jaws, size 630, 3-jaw. Steel body. DIN 55027 -15 spindle mount with studs and lock-nuts.

  • No. 102798 Self-centering Geared Scroll Lathe Chuck ZSU, Base jaws and reversible top jaws, size 630, 3-jaw, Steel Body, DIN 55026 A2-11 Spindle Mount, Base jaws and reversible top jaws, US Standard T&G.

  • No. 102822 Self-centering Geared Scroll Lathe Chuck ZSU, Base jaws and reversible top jaws, size 630, 3-jaw, Steel Body, DIN 55029 D1-11 Camlock Spindle Mount, Base jaws and reversible top jaws, US Standard T&G.

  • No. 102856 Self-centering Geared Scroll Lathe Chuck ZS, One-piece jaws, size 630, 4-jaw, steel body, DIN 6350 flat back mount.

  • No. 102862 Self-centering Geared Scroll Lathe Chuck ZSU, Base jaws and reversible top jaws, size 630, 4-jaw, steel body, DIN 6350 flat back mount.

  • No. 102888 Self-centering Geared Scroll Lathe Chuck ZS, One-piece jaws, size 630, 4-jaw. Steel body. DIN 55027 -11 spindle mount with studs and lock-nuts.

  • No. 102894 Self-centering Geared Scroll Lathe Chuck ZSU, Base jaws and reversible top jaws, size 630, 4-jaw. Steel body. DIN 55027 -11 spindle mount with studs and lock-nuts.

  • No. 102915 Self-centering Geared Scroll Lathe Chuck ZS, One-piece jaws, size 500, 3-jaw. Steel body. DIN 55027 -15 spindle mount with studs and lock-nuts.

  • No. 102921 Self-centering Geared Scroll Lathe Chuck ZSU, Base jaws and reversible top jaws, size 500, 3-jaw. Steel body. DIN 55027 -15 spindle mount with studs and lock-nuts.

  • No. 102945 Self-centering Geared Scroll Lathe Chuck ZSU, Base jaws and reversible top jaws, size 500, 3-jaw, Steel Body, DIN 55029 D1-15 Camlock Spindle Mount, Base jaws and reversible top jaws, US Standard T&G.

  • No. 102971 Self-centering Geared Scroll Lathe Chuck ZS, One-piece jaws, size 500, 4-jaw. Steel body. DIN 55027 -11 spindle mount with studs and lock-nuts.

  • No. 102977 Self-centering Geared Scroll Lathe Chuck ZSU, Base jaws and reversible top jaws, size 500, 4-jaw. Steel body. DIN 55027 -11 spindle mount with studs and lock-nuts.

  • No. 103084 Self-centering Geared Scroll Lathe Chuck ZS, One-piece jaws, size 630, 4-jaw. Steel body. DIN 55027 -15 spindle mount with studs and lock-nuts.

  • No. 103090 Self-centering Geared Scroll Lathe Chuck ZSU, Base jaws and reversible top jaws, size 630, 4-jaw. Steel body. DIN 55027 -15 spindle mount with studs and lock-nuts.

  • No. 103227 Self-centering Geared Scroll Lathe Chuck ZS, One-piece jaws, size 500, 4-jaw. Steel body. DIN 55027 -15 spindle mount with studs and lock-nuts.

  • No. 103233 Self-centering Geared Scroll Lathe Chuck ZSU, Base jaws and reversible top jaws, size 500, 4-jaw. Steel body. DIN 55027 -15 spindle mount with studs and lock-nuts.

  • No. 103271 Self-centering Geared Scroll Lathe Chuck ZSU, Base jaws and reversible top jaws, size 500, 4-jaw. Steel body. DIN 55029 D1-15 Camlock spindle mount.

  • No. 103274 Self-centering Geared Scroll Lathe Chuck ZSU, Base jaws and reversible top jaws, size 500, 3-jaw. Steel body. DIN 55029 D1-11 Camlock spindle mount.

  • No. 103275 Self-centering Geared Scroll Lathe Chuck ZSU, Base jaws and reversible top jaws, size 500, 3-jaw. Steel body. DIN 55029 D1-15 Camlock spindle mount.

  • No. 103328 Self-centering Geared Scroll Lathe Chuck ZSU, Base jaws and reversible top jaws, size 630, 3-jaw. Steel body. DIN 55029 D1-15 Camlock spindle mount.

  • No. 103340 Self-centering Geared Scroll Lathe Chuck ZS, One-piece jaws, size 500, 4-jaw, steel body, DIN 6350 flat back mount.

  • No. 103346 Self-centering Geared Scroll Lathe Chuck ZSU, Base jaws and reversible top jaws, size 500, 4-jaw, steel body, DIN 6350 flat back mount.

  • No. 104913 Self-centering Geared Scroll Lathe Chuck ZSU, Base jaws and reversible top jaws, size 800, 3-jaw, steel body, DIN 6350 flat back mount.

  • No. 104917 Self-centering Geared Scroll Lathe Chuck ZSU, Base jaws and reversible top jaws, size 800, 4-jaw, steel body, DIN 6350 flat back mount.

  • No. 104925 Self-centering Geared Scroll Lathe Chuck ZSU, Base jaws and reversible top jaws, size 1000, 3-jaw, steel body, DIN 6350 flat back mount.

  • No. 104929 Self-centering Geared Scroll Lathe Chuck ZSU, Base jaws and reversible top jaws, size 1000, 4-jaw, steel body, DIN 6350 flat back mount.

  • No. 104941 Self-centering Geared Scroll Lathe Chuck ZSU, Base jaws and reversible top jaws, size 1250, 3-jaw, steel body, DIN 6350 flat back mount.

  • No. 104945 Self-centering Geared Scroll Lathe Chuck ZSU, Base jaws and reversible top jaws, size 1250, 4-jaw, steel body, DIN 6350 flat back mount.

  • No. 105039 Self-centering Geared Scroll Lathe Chuck ZSU, Base jaws and reversible top jaws, size 160, 3-jaw, Steel Body, DIN 55029 D1-3 Camlock Spindle Mount, Base jaws and reversible top jaws, US Standard T&G.

  • No. 105870 Self-centering Geared Scroll Lathe Chuck ZSU, Base jaws and reversible top jaws, size 125, 3-jaw. Steel body. DIN 55029 D1-4 Camlock spindle mount.

  • No. 105872 Self-centering Geared Scroll Lathe Chuck ZSU, Base jaws and reversible top jaws, size 125, 4-jaw. Steel body. DIN 55029 D1-4 Camlock spindle mount.

  • No. 105882 Self-centering Geared Scroll Lathe Chuck ZSU, Base jaws and reversible top jaws, size 160, 3-jaw. Steel body. DIN 55029 D1-4 Camlock spindle mount.

  • No. 105886 Self-centering Geared Scroll Lathe Chuck ZSU, Base jaws and reversible top jaws, size 160, 4-jaw. Steel body. DIN 55029 D1-4 Camlock spindle mount.

  • No. 105898 Self-centering Geared Scroll Lathe Chuck ZSU, Base jaws and reversible top jaws, size 160, 3-jaw. Steel body. DIN 55029 D1-5 Camlock spindle mount.

  • No. 106074 Self-centering Geared Scroll Lathe Chuck ZG, size 125, 4-jaw, cast iron body, one piece jaws sets for OD and ID clamping, DIN 6350 flat back mount.

  • No. 106075 Self-centering Geared Scroll Lathe Chuck ZS, One-piece jaws, size 125, 4-jaw, steel body, DIN 6350 flat back mount.

  • No. 106081 Self-centering Geared Scroll Lathe Chuck ZSU, Base jaws and reversible top jaws, size 125, 4-jaw, steel body, DIN 6350 flat back mount.

  • No. 106251 Self-centering Geared Scroll Lathe Chuck ZSU, Base jaws and reversible top jaws, size 630, 4-jaw. Steel body. DIN 55029 D1-15 Camlock spindle mount.

  • No. 106302 Self-centering Geared Scroll Lathe Chuck ZSU, Base jaws and reversible top jaws, size 160, 4-jaw. Steel body. DIN 55029 D1-5 Camlock spindle mount.

  • No. 106330 Self-centering Geared Scroll Lathe Chuck ZSU, Base jaws and reversible top jaws, size 200, 3-jaw. Steel body. DIN 55029 D1-5 Camlock spindle mount.

  • No. 106334 Self-centering Geared Scroll Lathe Chuck ZSU, Base jaws and reversible top jaws, size 200, 4-jaw. Steel body. DIN 55029 D1-5 Camlock spindle mount.

  • No. 106346 Self-centering Geared Scroll Lathe Chuck ZSU, Base jaws and reversible top jaws, size 200, 3-jaw. Steel body. DIN 55029 D1-6 Camlock spindle mount.

  • No. 106350 Self-centering Geared Scroll Lathe Chuck ZSU, Base jaws and reversible top jaws, size 200, 4-jaw. Steel body. DIN 55029 D1-6 Camlock spindle mount.

  • No. 106386 Self-centering Geared Scroll Lathe Chuck ZSU, Base jaws and reversible top jaws, size 250, 3-jaw. Steel body. DIN 55029 D1-6 Camlock spindle mount.

  • No. 106390 Self-centering Geared Scroll Lathe Chuck ZSU, Base jaws and reversible top jaws, size 250, 4-jaw. Steel body. DIN 55029 D1-6 Camlock spindle mount.

  • No. 106402 Self-centering Geared Scroll Lathe Chuck ZSU, Base jaws and reversible top jaws, size 250, 3-jaw. Steel body. DIN 55029 D1-8 Camlock spindle mount.

  • No. 106406 Self-centering Geared Scroll Lathe Chuck ZSU, Base jaws and reversible top jaws, size 250, 4-jaw. Steel body. DIN 55029 D1-8 Camlock spindle mount.

  • No. 106442 Self-centering Geared Scroll Lathe Chuck ZSU, Base jaws and reversible top jaws, size 315, 3-jaw. Steel body. DIN 55029 D1-6 Camlock spindle mount.

  • No. 106446 Self-centering Geared Scroll Lathe Chuck ZSU, Base jaws and reversible top jaws, size 315, 4-jaw. Steel body. DIN 55029 D1-6 Camlock spindle mount.

  • No. 106458 Self-centering Geared Scroll Lathe Chuck ZSU, Base jaws and reversible top jaws, size 315, 3-jaw. Steel body. DIN 55029 D1-8 Camlock spindle mount.

  • No. 106462 Self-centering Geared Scroll Lathe Chuck ZSU, Base jaws and reversible top jaws, size 315, 4-jaw. Steel body. DIN 55029 D1-8 Camlock spindle mount.

  • No. 106474 Self-centering Geared Scroll Lathe Chuck ZSU, Base jaws and reversible top jaws, size 315, 3-jaw. Steel body. DIN 55029 D1-11 Camlock spindle mount.

  • No. 106478 Self-centering Geared Scroll Lathe Chuck ZSU, Base jaws and reversible top jaws, size 315, 4-jaw. Steel body. DIN 55029 D1-11 Camlock spindle mount.

  • No. 106498 Self-centering Geared Scroll Lathe Chuck ZSU, Base jaws and reversible top jaws, size 400, 3-jaw. Steel body. DIN 55029 D1-8 Camlock spindle mount.

  • No. 106602 Self-centering Geared Scroll Lathe Chuck ZSU, Base jaws and reversible top jaws, size 400, 4-jaw. Steel body. DIN 55029 D1-8 Camlock spindle mount.

  • No. 106614 Self-centering Geared Scroll Lathe Chuck ZSU, Base jaws and reversible top jaws, size 400, 3-jaw. Steel body. DIN 55029 D1-11 Camlock spindle mount.

  • No. 106618 Self-centering Geared Scroll Lathe Chuck ZSU, Base jaws and reversible top jaws, size 400, 4-jaw. Steel body. DIN 55029 D1-11 Camlock spindle mount.

  • No. 106646 Self-centering Geared Scroll Lathe Chuck ZSU, Base jaws and reversible top jaws, size 500, 4-jaw. Steel body. DIN 55029 D1-11 Camlock spindle mount.

  • No. 106658 Self-centering Geared Scroll Lathe Chuck ZSU, Base jaws and reversible top jaws, size 630, 3-jaw. Steel body. DIN 55029 D1-11 Camlock spindle mount.

  • No. 106662 Self-centering Geared Scroll Lathe Chuck ZSU, Base jaws and reversible top jaws, size 630, 4-jaw. Steel body. DIN 55029 D1-11 Camlock spindle mount.

  • No. 107015 Self-centering Geared Scroll Lathe Chuck ZS, One-piece jaws, size 125, 4-jaw. Steel body. DIN 55027 -4 spindle mount with studs and lock-nuts.

  • No. 107021 Self-centering Geared Scroll Lathe Chuck ZSU, Base jaws and reversible top jaws, size 125, 4-jaw. Steel body. DIN 55027 -4 spindle mount with studs and lock-nuts.

  • No. 108895 Self-centering Geared Scroll Lathe Chuck ZS, One-piece jaws, size 125, 3-jaw. Steel body. DIN 55029 D1-4 Camlock spindle mount.

  • No. 108897 Self-centering Geared Scroll Lathe Chuck ZS, One-piece jaws, size 160, 3-jaw. Steel body. DIN 55029 D1-4 Camlock spindle mount.

  • No. 109150 Self-centering Geared Scroll Lathe Chuck ZS, One-piece jaws, size 160, 3-jaw. Steel body. DIN 55029 D1-5 Camlock spindle mount.

  • No. 109151 Self-centering Geared Scroll Lathe Chuck ZS, One-piece jaws, size 200, 3-jaw. Steel body. DIN 55029 D1-11 Camlock spindle mount.

  • No. 109154 Self-centering Geared Scroll Lathe Chuck ZS, One-piece jaws, size 200, 3-jaw. Steel body. DIN 55029 D1-6 Camlock spindle mount.

  • No. 109155 Self-centering Geared Scroll Lathe Chuck ZS, One-piece jaws, size 250, 3-jaw. Steel body. DIN 55029 D1-6 Camlock spindle mount.

  • No. 109156 Self-centering Geared Scroll Lathe Chuck ZS, One-piece jaws, size 315, 3-jaw. Steel body. DIN 55029 D1-6 Camlock spindle mount.

  • No. 109159 Self-centering Geared Scroll Lathe Chuck ZS, One-piece jaws, size 250, 3-jaw. Steel body. DIN 55029 D1-8 Camlock spindle mount.

  • No. 109160 Self-centering Geared Scroll Lathe Chuck ZS, One-piece jaws, size 315, 3-jaw. Steel body. DIN 55029 D1-8 Camlock spindle mount.

  • No. 109161 Self-centering Geared Scroll Lathe Chuck ZS, One-piece jaws, size 400, 3-jaw. Steel body. DIN 55029 D1-8 Camlock spindle mount.

  • No. 109165 Self-centering Geared Scroll Lathe Chuck ZS, One-piece jaws, size 315, 3-jaw. Steel body. DIN 55029 D1-11 Camlock spindle mount.

  • No. 109166 Self-centering Geared Scroll Lathe Chuck ZS, One-piece jaws, size 400, 3-jaw. Steel body. DIN 55029 D1-11 Camlock spindle mount.

  • No. 109167 Self-centering Geared Scroll Lathe Chuck ZS, One-piece jaws, size 500, 3-jaw. Steel body. DIN 55029 D1-11 Camlock spindle mount.

  • No. 109168 Self-centering Geared Scroll Lathe Chuck ZS, One-piece jaws, size 630, 3-jaw. Steel body. DIN 55029 D1-11 Camlock spindle mount.

  • No. 109170 Self-centering Geared Scroll Lathe Chuck ZS, One-piece jaws, size 500, 3-jaw. Steel body. DIN 55029 D1-15 Camlock spindle mount.

  • No. 109171 Self-centering Geared Scroll Lathe Chuck ZS, One-piece jaws, size 630, 3-jaw. Steel body. DIN 55029 D1-15 Camlock spindle mount.

  • No. 109208 Self-centering Geared Scroll Lathe Chuck ZS, One-piece jaws, size 125, 4-jaw. Steel body. DIN 55029 D1-4 Camlock spindle mount.

  • No. 109210 Self-centering Geared Scroll Lathe Chuck ZS, One-piece jaws, size 160, 4-jaw. Steel body. DIN 55029 D1-4 Camlock spindle mount.

  • No. 109213 Self-centering Geared Scroll Lathe Chuck ZS, One-piece jaws, size 160, 4-jaw. Steel body. DIN 55029 D1-5 Camlock spindle mount.

  • No. 109214 Self-centering Geared Scroll Lathe Chuck ZS, One-piece jaws, size 200, 4-jaw. Steel body. DIN 55029 D1-5 Camlock spindle mount.

  • No. 109217 Self-centering Geared Scroll Lathe Chuck ZS, One-piece jaws, size 200, 4-jaw. Steel body. DIN 55029 D1-6 Camlock spindle mount.

  • No. 109218 Self-centering Geared Scroll Lathe Chuck ZS, One-piece jaws, size 250, 4-jaw. Steel body. DIN 55029 D1-6 Camlock spindle mount.

  • No. 109219 Self-centering Geared Scroll Lathe Chuck ZS, One-piece jaws, size 315, 4-jaw. Steel body. DIN 55029 D1-6 Camlock spindle mount.

  • No. 109222 Self-centering Geared Scroll Lathe Chuck ZS, One-piece jaws, size 250, 4-jaw. Steel body. DIN 55029 D1-8 Camlock spindle mount.

  • No. 109223 Self-centering Geared Scroll Lathe Chuck ZS, One-piece jaws, size 315, 4-jaw. Steel body. DIN 55029 D1-8 Camlock spindle mount.

  • No. 109224 Self-centering Geared Scroll Lathe Chuck ZS, One-piece jaws, size 400, 4-jaw. Steel body. DIN 55029 D1-8 Camlock spindle mount.

  • No. 109228 Self-centering Geared Scroll Lathe Chuck ZS, One-piece jaws, size 315, 4-jaw. Steel body. DIN 55029 D1-11 Camlock spindle mount.

  • No. 109229 Self-centering Geared Scroll Lathe Chuck ZS, One-piece jaws, size 400, 4-jaw. Steel body. DIN 55029 D1-11 Camlock spindle mount.

  • No. 109230 Self-centering Geared Scroll Lathe Chuck ZS, One-piece jaws, size 500, 4-jaw. Steel body. DIN 55029 D1-11 Camlock spindle mount.

  • No. 109231 Self-centering Geared Scroll Lathe Chuck ZS, One-piece jaws, size 630, 4-jaw. Steel body. DIN 55029 D1-11 Camlock spindle mount.

  • No. 109233 Self-centering Geared Scroll Lathe Chuck ZS, One-piece jaws, size 500, 4-jaw. Steel body. DIN 55029 D1-15 Camlock spindle mount.

  • No. 109234 Self-centering Geared Scroll Lathe Chuck ZS, One-piece jaws, size 630, 4-jaw. Steel body. DIN 55029 D1-15 Camlock spindle mount.

  • No. 109761 Self-centering Geared Scroll Lathe Chuck ZSU, Base jaws and reversible top jaws, size 500, 3-jaw, Steel Body, DIN 55026 A2-8 Spindle Mount, Base jaws and reversible top jaws, US Standard T&G.

  • No. 111360 Combination Geared Scroll Lathe Chuck ES- 160, 3-jaw, steel body, DIN 6350 flat back mount.

  • No. 111365 Combination Geared Scroll Lathe Chuck ES- 200, 3-jaw, steel body, DIN 6350 flat back mount.

  • No. 111370 Combination Geared Scroll Lathe Chuck ES- 250, 3-jaw, steel body, DIN 6350 flat back mount.

  • No. 111375 Combination Geared Scroll Lathe Chuck ES- 315, 3-jaw, steel body, DIN 6350 flat back mount.

  • No. 111380 Combination Geared Scroll Lathe Chuck ES- 400, 3-jaw, steel body, DIN 6350 flat back mount.

  • No. 111385 Combination Geared Scroll Lathe Chuck ES- 500, 3-jaw, steel body, DIN 6350 flat back mount.

  • No. 111390 Combination Geared Scroll Lathe Chuck ES- 630, 3-jaw, steel body, DIN 6350 flat back mount.

  • No. 111595 Drilling machine vice BOF, size 2, jaw width 110, with V-jaw and normal jaw SBO

  • No. 111596 Drilling machine vice BOF, size 3, jaw width 135, with V-jaw and normal jaw SBO

  • No. 111597 Drilling machine vice BOF, size 4, jaw width 160, with V-jaw and normal jaw SBO

  • No. 111648 Machine vice RS, size 5, jaw width 200, with normal jaws SGN and hand crank

  • No. 111789 Combination Geared Scroll Lathe Chuck ES- 160, 4-jaw, steel body, DIN 6350 flat back mount.

  • No. 111793 Combination Geared Scroll Lathe Chuck ES- 200, 4-jaw, steel body, DIN 6350 flat back mount.

  • No. 111797 Combination Geared Scroll Lathe Chuck ES- 250, 4-jaw, steel body, DIN 6350 flat back mount.

  • No. 111801 Combination Geared Scroll Lathe Chuck ES- 315, 4-jaw, steel body, DIN 6350 flat back mount.

  • No. 111805 Combination Geared Scroll Lathe Chuck ES- 400, 4-jaw, steel body, DIN 6350 flat back mount.

  • No. 111809 Combination Geared Scroll Lathe Chuck ES- 500, 4-jaw, steel body, DIN 6350 flat back mount.

  • No. 111813 Combination Geared Scroll Lathe Chuck ES- 630, 4-jaw, steel body, DIN 6350 flat back mount.

  • No. 113158 Self-centering Geared Scroll Lathe Chuck ZS, One-piece jaws, size 200, 3-jaw, mounting from front, steel body, DIN 6350 flat back mount.

  • No. 113160 Self-centering Geared Scroll Lathe Chuck ZS, One-piece jaws, size 200, 4-jaw, mounting from front, steel body, DIN 6350 flat back mount.

  • No. 114304 Self-centering Geared Scroll Lathe Chuck ZS, One-piece jaws, size 250, 3-jaw, mounting from front, steel body, DIN 6350 flat back mount.

  • No. 114306 Self-centering Geared Scroll Lathe Chuck ZS, One-piece jaws, size 250, 4-jaw, mounting from front, steel body, DIN 6350 flat back mount.

  • No. 115568 Self-centering Geared Scroll Lathe Chuck ZS, One-piece jaws, size 160, 3-jaw, mounting from front, steel body, DIN 6350 flat back mount.

  • No. 118521 C 21: Reversible top jaws, hardened serration 90°- material: 16 MnCr 5. 2-jaw set.

  • No. 118522 C 21: Reversible top jaws, 3-jaw set, hardened serration 90° - material: 16 MnCr 5.

  • No. 120155 Self-centering Geared Scroll Lathe Chuck ZS, One-piece jaws, size 125, 3-jaw, mounting from front, steel body, DIN 6350 flat back mount.

  • No. 120270 Self-centering Geared Scroll Lathe Chuck ZS, One-piece jaws, size 315, 3-jaw, mounting from front, steel body, DIN 6350 flat back mount.

  • No. 123355 C 21: Soft top jaws, 3-jaw set, can be hardened tongue and groove 120° bevelled, material: 16MnCr 5.

  • No. 123358 C 21: Soft top jaws, 3-jaw set, can be hardened tongue and groove 120° bevelled, material: 16MnCr 5.

  • No. 123430 C 21: Soft top jaws, 3-jaw set, can be hardened tongue and groove 120° bevelled, material: 16MnCr 5.

  • No. 123465 Self-centering Geared Scroll Lathe Chuck ZS, One-piece jaws, size 500, 4-jaw, mounting from front, steel body, DIN 6350 flat back mount.

  • No. 123475 Self-centering Geared Scroll Lathe Chuck ZS, One-piece jaws, size 400, 3-jaw, mounting from front, steel body, DIN 6350 flat back mount.

  • No. 124447 Self-centering Geared Scroll Lathe Chuck ZS, One-piece jaws, size 125, 4-jaw, mounting from front, steel body, DIN 6350 flat back mount.

  • No. 125802 Self-centering Geared Scroll Lathe Chuck ZS, One-piece jaws, size 160, 4-jaw, mounting from front, steel body, DIN 6350 flat back mount.

  • No. 127616 Self-centering Geared Scroll Lathe Chuck ZS, One-piece jaws, size 500, 3-jaw, mounting from front, steel body, DIN 6350 flat back mount.

  • No. 127823 Self-centering Geared Scroll Lathe Chuck ZSU, Base jaws and reversible top jaws, size 250, 3-jaw, Steel Body, DIN 55029 D1-4 Camlock Spindle Mount, Base jaws and reversible top jaws, US Standard T&G.

  • No. 128031 Machine vice RS, size 1, jaw width 92, with normal jaws SGN and hand crank

  • No. 128032 Machine vice RS, size 2, jaw width 113, with normal jaws SGN and hand crank

  • No. 128033 Machine vice RS, size 3, jaw width 135, with normal jaws SGN and hand crank

  • No. 128034 Machine vice RS, size 4, jaw width 160, with normal jaws SGN and hand crank

  • No. 128545 Self-centering Geared Scroll Lathe Chuck ZS, One-piece jaws, size 630, 3-jaw, mounting from front, steel body, DIN 6350 flat back mount.

  • No. 129946 Self-centering Geared Scroll Lathe Chuck ZS, One-piece jaws, size 315, 4-jaw, mounting from front, steel body, DIN 6350 flat back mount.

  • No. 133147 C 21: Soft top jaws, can be hardened serration 90°- material: 16 MnCr 5. 2-jaw set.

  • No. 133148 C 21: Soft top jaws, can be hardened serration 90°- material: 16 MnCr 5. 2-jaw set.

  • No. 133149 C 21: Soft top jaws, can be hardened serration 90°- material: 16 MnCr 5. 2-jaw set.

  • No. 133151 C 21: Soft top jaws, can be hardened serration 90°- material: 16 MnCr 5. 2-jaw set.

  • No. 133152 C 21: Soft top jaws, can be hardened serration 90°- material: 16 MnCr 5. 3-jaw set.

  • No. 133153 C 21: Soft top jaws, 3-jaw set, can be hardened serration 90° - material: 16 MnCr 5.

  • No. 133154 C 21: Soft top jaws, 3-jaw set, can be hardened serration 90° - material: 16 MnCr 5.

  • No. 133156 C 21: Soft top jaws, can be hardened serration 90°- material: 16 MnCr 5. 3-jaw set.

  • No. 133705 Base plate, size 315, for lathe chucks with DIN 6350 flat back mount DIN 6350

  • No. 134158 Drilling machine vice BSS, size 2, jaw width 110, with V-jaw and normal jaw SBO

  • No. 134159 Drilling machine vice BSS, size 3, jaw width 135, with V-jaw and normal jaw SBO

  • No. 134401 Self-centering Geared Scroll Lathe Chuck ZS, One-piece jaws, size 400, 4-jaw, mounting from front, steel body, DIN 6350 flat back mount.

  • No. 135061 Self-centering Geared Scroll Lathe Chuck ZS, One-piece jaws, size 630, 4-jaw, mounting from front, steel body, DIN 6350 flat back mount.

  • No. 135358 Steel body Independent chuck USU, size 400, steel body with base jaws and reversible top jaws, DIN 55027 -11 spindle mount with studs and lock-nuts.

  • No. 135359 Steel body Independent chuck USU, size 400, steel body with base jaws and reversible top jaws, DIN 55029 D1-11 Camlock spindle mount.

  • No. 135368 Steel body Independent chuck USU, size 400, steel body with base jaws and reversible top jaws, DIN 6350 flat back mount, without mounting bolts.

  • No. 135371 Steel body Independent chuck USU, size 400, steel body with base jaws and reversible top jaws, DIN 55027 -6 spindle mount with studs and lock-nuts.

  • No. 135372 Steel body Independent chuck USU, size 400, steel body with base jaws and reversible top jaws, DIN 55027 -8 spindle mount with studs and lock-nuts.

  • No. 135375 Steel body Independent chuck USU, size 400, steel body with base jaws and reversible top jaws, DIN 55029 D1-6 Camlock spindle mount.

  • No. 135376 Steel body Independent chuck USU, size 400, steel body with base jaws and reversible top jaws, DIN 55029 D1-8 Camlock spindle mount.

  • No. 135631 Steel body Independent chuck USU, size 500, steel body with base jaws and reversible top jaws, DIN 6350 flat back mount, without mounting bolts.

  • No. 135632 Steel body Independent chuck USU, size 500, steel body with base jaws and reversible top jaws, DIN 55027 -6 spindle mount with studs and lock-nuts.

  • No. 135633 Steel body Independent chuck USU, size 500, steel body with base jaws and reversible top jaws, DIN 55027 -8 spindle mount with studs and lock-nuts.

  • No. 135696 Steel body Independent chuck USU, size 500, steel body with base jaws and reversible top jaws, DIN 55027 -11 spindle mount with studs and lock-nuts.

  • No. 135703 Steel body Independent chuck USU, size 500, steel body with base jaws and reversible top jaws, DIN 55029 D1-6 Camlock spindle mount.

  • No. 135704 Steel body Independent chuck USU, size 500, steel body with base jaws and reversible top jaws, DIN 55029 D1-8 Camlock spindle mount.

  • No. 135705 Steel body Independent chuck USU, size 500, steel body with base jaws and reversible top jaws, DIN 55029 D1-11 Camlock spindle mount.

  • No. 136944 Steel body Independent chuck USU, size 450, steel body with base jaws and reversible top jaws, DIN 6350 flat back mount, without mounting bolts.

  • No. 136947 Steel body Independent chuck USU, size 450, steel body with base jaws and reversible top jaws, DIN 55027 -6 spindle mount with studs and lock-nuts.

  • No. 136948 Steel body Independent chuck USU, size 450, steel body with base jaws and reversible top jaws, DIN 55027 -8 spindle mount with studs and lock-nuts.

  • No. 136951 Steel body Independent chuck USU, size 450, steel body with base jaws and reversible top jaws, DIN 55029 D1-6 Camlock spindle mount.

  • No. 136952 Steel body Independent chuck USU, size 450, steel body with base jaws and reversible top jaws, DIN 55029 D1-8 Camlock spindle mount.

  • No. 136955 Steel body Independent chuck USU, size 450, steel body with base jaws and reversible top jaws, DIN 55029 D1-11 Camlock spindle mount.

  • No. 136957 Steel body Independent chuck USU, size 450, steel body with base jaws and reversible top jaws, DIN 55027 -11 spindle mount with studs and lock-nuts.

  • No. 137031 C 21: Claw-type jaws, 1 piece, hardened serration 90° - width of the groove 17.

  • No. 137032 C 21: Claw-type jaws, 1 piece, hardened serration 90° - width of the groove 17.

  • No. 137033 C 21: Claw-type jaws, 1 piece, hardened serration 90° - width of the groove 17.

  • No. 137034 C 21: Claw-type jaws, 1 piece, hardened serration 90° - width of the groove 17.

  • No. 137035 C 21: Claw-type jaws, 1 piece, hardened serration 90° - width of the groove 17.

  • No. 137036 C 21: Claw-type jaws, 1 piece, hardened serration 90° - width of the groove 17.

  • No. 137037 C 21: Claw-type jaws, 1 piece, hardened serration 90° - width of the groove 17.

  • No. 137038 C 21: Claw-type jaws, 1 piece, hardened serration 90° - width of the groove 17.

  • No. 137039 C 21: Claw-type jaws, 1 piece, hardened serration 90° - width of the groove 17.

  • No. 137041 C 21: Claw-type jaws, 1 piece, hardened serration 90° - width of the groove 21.

  • No. 137042 C 21: Claw-type jaws, 1 piece, hardened serration 90° - width of the groove 21.

  • No. 137043 C 21: Claw-type jaws, 1 piece, hardened serration 90° - width of the groove 21.

  • No. 137044 C 21: Claw-type jaws, 1 piece, hardened serration 90° - width of the groove 21.

  • No. 137045 C 21: Claw-type jaws, 1 piece, hardened serration 90° - width of the groove 21.

  • No. 137046 C 21: Claw-type jaws, 1 piece, hardened serration 90° - width of the groove 21.

  • No. 137051 C 21: Claw-type jaws, 1 piece, hardened serration 90°- width of the groove 25,5.

  • No. 137052 C 21: Claw-type jaws, 1 piece, hardened serration 90°- width of the groove 25,5.

  • No. 137053 C 21: Claw-type jaws, 1 piece, hardened serration 90°- width of the groove 25,5.

  • No. 137054 C 21: Claw-type jaws, 1 piece, hardened serration 90°- width of the groove 25,5.

  • No. 137060 C 21: Reversible claw-type top jaws, standard design tongue and groove, large clamping range, 1 piece, hardened.

  • No. 137061 C 21: Reversible claw-type top jaws, standard design tongue and groove, small clamping range, 1 piece, hardened.

  • No. 137062 C 21: Reversible claw-type top jaws, standard design tongue and groove, medium clamping range, 1 piece, hardened.

  • No. 137064 C 21: Reversible claw-type top jaws, standard design tongue and groove, small clamping range, 1 piece, hardened.

  • No. 137065 C 21: Reversible claw-type top jaws, standard design tongue and groove, medium clamping range, 1 piece, hardened.

  • No. 137066 C 21: Reversible claw-type top jaws, wide version tongue and groove, small clamping range, 1 piece, hardened.

  • No. 137067 C 21: Reversible claw-type top jaws, wide version tongue and groove, large clamping range, 1 piece, hardened.

  • No. 137068 C 21: Reversible claw-type top jaws, wide version tongue and groove, medium clamping range, 1 piece, hardened.

  • No. 137108 C 21: Reversible claw-type top jaws, standard design tongue and groove, small clamping range, 1 piece, hardened.

  • No. 137109 C 21: Reversible claw-type top jaws, standard design tongue and groove, medium clamping range, 1 piece, hardened.

  • No. 137110 C 21: Reversible claw-type top jaws, wide version tongue and groove, small clamping range, 1 piece, hardened.

  • No. 137111 C 21: Reversible claw-type top jaws, wide version tongue and groove, large clamping range, 1 piece, hardened.

  • No. 137112 C 21: Reversible claw-type top jaws, wide version tongue and groove, medium clamping range, 1 piece, hardened.

  • No. 137114 C 21: Reversible claw-type top jaws, standard design tongue and groove, small clamping range, 1 piece, hardened.

  • No. 137115 C 21: Reversible claw-type top jaws, standard design tongue and groove, medium clamping range, 1 piece, hardened.

  • No. 137116 C 21: Reversible claw-type top jaws, wide version tongue and groove, small clamping range, 1 piece, hardened.

  • No. 137117 C 21: Reversible claw-type top jaws, wide version tongue and groove, large clamping range, 1 piece, hardened.

  • No. 137118 C 21: Reversible claw-type top jaws, wide version tongue and groove, medium clamping range, 1 piece, hardened.

  • No. 137119 C 21: Reversible claw-type top jaws, standard design tongue and groove, large clamping range, 1 piece, hardened.

  • No. 137120 C 21: Reversible claw-type top jaws, standard design tongue and groove, small clamping range, 1 piece, hardened.

  • No. 137121 C 21: Reversible claw-type top jaws, standard design tongue and groove, medium clamping range, 1 piece, hardened.

  • No. 137147 Steel body Independent chuck USU, size 260, steel body with base jaws and reversible top jaws, DIN 6350 flat back mount, without mounting bolts.

  • No. 137163 Steel body Independent chuck USU, size 260, steel body with base jaws and reversible top jaws, DIN 55027 -4 spindle mount with studs and lock-nuts.

  • No. 137164 Steel body Independent chuck USU, size 260, steel body with base jaws and reversible top jaws, DIN 55027 -5 spindle mount with studs and lock-nuts.

  • No. 137165 Steel body Independent chuck USU, size 260, steel body with base jaws and reversible top jaws, DIN 55027 -6 spindle mount with studs and lock-nuts.

  • No. 137166 Steel body Independent chuck USU, size 260, steel body with base jaws and reversible top jaws, DIN 55029 D1-4 Camlock spindle mount.

  • No. 137254 Steel body Independent chuck USU, size 260, steel body with base jaws and reversible top jaws, DIN 55029 D1-5 Camlock spindle mount.

  • No. 137255 Steel body Independent chuck USU, size 260, steel body with base jaws and reversible top jaws, DIN 55029 D1-6 Camlock spindle mount.

  • No. 138950 C 15: Changeable workpiece rests (in different lengths).

  • No. 139720 Steel body Independent chuck USU, size 310, steel body with base jaws and reversible top jaws, DIN 6350 flat back mount, without mounting bolts.

  • No. 139723 Steel body Independent chuck USU, size 630, steel body with base jaws and reversible top jaws, DIN 6350 flat back mount, without mounting bolts.

  • No. 139724 Steel body Independent chuck USU, size 310, steel body with base jaws and reversible top jaws, DIN 55027 -5 spindle mount with studs and lock-nuts.

  • No. 139725 Steel body Independent chuck USU, size 310, steel body with base jaws and reversible top jaws, DIN 55027 -6 spindle mount with studs and lock-nuts.

  • No. 139726 Steel body Independent chuck USU, size 310, steel body with base jaws and reversible top jaws, DIN 55027 -8 spindle mount with studs and lock-nuts.

  • No. 139733 Steel body Independent chuck USU, size 310, steel body with base jaws and reversible top jaws, DIN 55029 D1-5 Camlock spindle mount.

  • No. 139734 Steel body Independent chuck USU, size 310, steel body with base jaws and reversible top jaws, DIN 55029 D1-6 Camlock spindle mount.

  • No. 139735 Steel body Independent chuck USU, size 310, steel body with base jaws and reversible top jaws, DIN 55029 D1-8 Camlock spindle mount.

  • No. 139767 Steel body Independent chuck USU, size 630, steel body with base jaws and reversible top jaws, DIN 55027 -8 spindle mount with studs and lock-nuts.

  • No. 139768 Steel body Independent chuck USU, size 630, steel body with base jaws and reversible top jaws, DIN 55027 -11 spindle mount with studs and lock-nuts.

  • No. 139769 Steel body Independent chuck USU, size 630, steel body with base jaws and reversible top jaws, DIN 55027 -15 spindle mount with studs and lock-nuts.

  • No. 139776 Steel body Independent chuck USU, size 630, steel body with base jaws and reversible top jaws, DIN 55029 D1-8 Camlock spindle mount.

  • No. 139777 Steel body Independent chuck USU, size 630, steel body with base jaws and reversible top jaws, DIN 55029 D1-11 Camlock spindle mount.

  • No. 139778 Steel body Independent chuck USU, size 630, steel body with base jaws and reversible top jaws, DIN 55029 D1-15 Camlock spindle mount.

  • No. 139781 Steel body Independent chuck USE, size 260, steel body with reversible one-piece jaws, DIN 6350 flat back mount, without mounting bolts.

  • No. 139782 Steel body Independent chuck USE, size 260, steel body with reversible one-piece jaws, DIN 55027 -4 spindle mount with studs and lock-nuts.

  • No. 139783 Steel body Independent chuck USE, size 260, steel body with reversible one-piece jaws, DIN 55027 -5 spindle mount with studs and lock-nuts.

  • No. 139784 Steel body Independent chuck USE, size 260, steel body with reversible one-piece jaws, DIN 55027 -6 spindle mount with studs and lock-nuts.

  • No. 139791 Steel body Independent chuck USE, size 260, steel body with reversible one-piece jaws, DIN 55029 D1-4 Camlock spindle mount.

  • No. 139792 Steel body Independent chuck USE, size 260, steel body with reversible one-piece jaws, DIN 55029 D1-5 Camlock spindle mount.

  • No. 139793 Steel body Independent chuck USE, size 260, steel body with reversible one-piece jaws, DIN 55029 D1-6 Camlock spindle mount.

  • No. 139796 Steel body Independent chuck USE, size 310, steel body with reversible one-piece jaws, DIN 6350 flat back mount, without mounting bolts.

  • No. 139797 Steel body Independent chuck USE, size 310, steel body with reversible one-piece jaws, DIN 55027 -5 spindle mount with studs and lock-nuts.

  • No. 139798 Steel body Independent chuck USE, size 310, steel body with reversible one-piece jaws, DIN 55027 -6 spindle mount with studs and lock-nuts.

  • No. 139799 Steel body Independent chuck USE, size 310, steel body with reversible one-piece jaws, DIN 55027 -8 spindle mount with studs and lock-nuts.

  • No. 139806 Steel body Independent chuck USE, size 310, steel body with reversible one-piece jaws, DIN 55029 D1-5 Camlock spindle mount.

  • No. 139807 Steel body Independent chuck USE, size 310, steel body with reversible one-piece jaws, DIN 55029 D1-6 Camlock spindle mount.

  • No. 139808 Steel body Independent chuck USE, size 310, steel body with reversible one-piece jaws, DIN 55029 D1-8 Camlock spindle mount.

  • No. 139827 Steel body Independent chuck USE, size 400, steel body with reversible one-piece jaws, DIN 6350 flat back mount, without mounting bolts.

  • No. 139828 Steel body Independent chuck USE, size 400, steel body with reversible one-piece jaws, DIN 55027 -6 spindle mount with studs and lock-nuts.

  • No. 139829 Steel body Independent chuck USE, size 400, steel body with reversible one-piece jaws, DIN 55027 -8 spindle mount with studs and lock-nuts.

  • No. 139830 Steel body Independent chuck USE, size 400, steel body with reversible one-piece jaws, DIN 55027 -11 spindle mount with studs and lock-nuts.

  • No. 139837 Steel body Independent chuck USE, size 400, steel body with reversible one-piece jaws, DIN 55029 D1-6 Camlock spindle mount.

  • No. 139838 Steel body Independent chuck USE, size 400, steel body with reversible one-piece jaws, DIN 55029 D1-8 Camlock spindle mount.

  • No. 139839 Steel body Independent chuck USE, size 400, steel body with reversible one-piece jaws, DIN 55029 D1-11 Camlock spindle mount.

  • No. 139842 Steel body Independent chuck USE, size 450, steel body with reversible one-piece jaws, DIN 6350 flat back mount, without mounting bolts.

  • No. 139843 Steel body Independent chuck USE, size 450, steel body with reversible one-piece jaws, DIN 55027 -6 spindle mount with studs and lock-nuts.

  • No. 139844 Steel body Independent chuck USE, size 450, steel body with reversible one-piece jaws, DIN 55027 -8 spindle mount with studs and lock-nuts.

  • No. 139845 Steel body Independent chuck USE, size 450, steel body with reversible one-piece jaws, DIN 55027 -11 spindle mount with studs and lock-nuts.

  • No. 139852 Steel body Independent chuck USE, size 450, steel body with reversible one-piece jaws, DIN 55029 D1-6 Camlock spindle mount.

  • No. 139853 Steel body Independent chuck USE, size 450, steel body with reversible one-piece jaws, DIN 55029 D1-8 Camlock spindle mount.

  • No. 139854 Steel body Independent chuck USE, size 450, steel body with reversible one-piece jaws, DIN 55029 D1-11 Camlock spindle mount.

  • No. 139857 Steel body Independent chuck USE, size 500, steel body with reversible one-piece jaws, DIN 6350 flat back mount, without mounting bolts.

  • No. 139858 Steel body Independent chuck USE, size 500, steel body with reversible one-piece jaws, DIN 55027 -6 spindle mount with studs and lock-nuts.

  • No. 139859 Steel body Independent chuck USE, size 500, steel body with reversible one-piece jaws, DIN 55027 -8 spindle mount with studs and lock-nuts.

  • No. 139860 Steel body Independent chuck USE, size 500, steel body with reversible one-piece jaws, DIN 55027 -11 spindle mount with studs and lock-nuts.

  • No. 139867 Steel body Independent chuck USE, size 500, steel body with reversible one-piece jaws, DIN 55029 D1-6 Camlock spindle mount.

  • No. 139868 Steel body Independent chuck USE, size 500, steel body with reversible one-piece jaws, DIN 55029 D1-8 Camlock spindle mount.

  • No. 139869 Steel body Independent chuck USE, size 500, steel body with reversible one-piece jaws, DIN 55029 D1-11 Camlock spindle mount.

  • No. 139887 Steel body Independent chuck USE, size 630, steel body with reversible one-piece jaws, DIN 6350 flat back mount, without mounting bolts.

  • No. 139888 Steel body Independent chuck USE, size 630, steel body with reversible one-piece jaws, DIN 55027 -8 spindle mount with studs and lock-nuts.

  • No. 139889 Steel body Independent chuck USE, size 630, steel body with reversible one-piece jaws, DIN 55027 -11 spindle mount with studs and lock-nuts.

  • No. 139890 Steel body Independent chuck USE, size 630, steel body with reversible one-piece jaws, DIN 55027 -15 spindle mount with studs and lock-nuts.

  • No. 139897 Steel body Independent chuck USE, size 630, steel body with reversible one-piece jaws, DIN 55029 D1-8 Camlock spindle mount.

  • No. 139898 Steel body Independent chuck USE, size 630, steel body with reversible one-piece jaws, DIN 55029 D1-11 Camlock spindle mount.

  • No. 139899 Steel body Independent chuck USE, size 630, steel body with reversible one-piece jaws, DIN 55029 D1-15 Camlock spindle mount.

  • No. 140800 Steel body Independent chuck USE, size 710, steel body with reversible one-piece jaws, DIN 6350 flat back mount, without mounting bolts.

  • No. 140801 Steel body Independent chuck USE, size 800, steel body with reversible one-piece jaws, DIN 6350 flat back mount, without mounting bolts.

  • No. 140804 Steel body Independent chuck USE, size 710, steel body with reversible one-piece jaws, DIN 55029 D1-8 Camlock spindle mount.

  • No. 140805 Steel body Independent chuck USE, size 710, steel body with reversible one-piece jaws, DIN 55029 D1-11 Camlock spindle mount.

  • No. 140810 Steel body Independent chuck USE, size 800, steel body with reversible one-piece jaws, DIN 55029 D1-11 Camlock spindle mount.

  • No. 140811 Steel body Independent chuck USE, size 800, steel body with reversible one-piece jaws, DIN 55029 D1-15 Camlock spindle mount.

  • No. 141049 C 15: Interchangeable clamping inserts, 1 piece with claws.

  • No. 141050 C 15: Interchangeable clamping inserts, 1 piece with serrated toothing.

  • No. 141051 C 15: Interchangeable clamping inserts, 1 piece with heat treatable surface.

  • No. 141052 C 15: Interchangeable clamping inserts, 1 piece with claws.

  • No. 141053 C 15: Interchangeable clamping inserts, 1 piece with serrated toothing.

  • No. 141054 C 15: Interchangeable clamping inserts, 1 piece with heat treatable surface.

  • No. 141055 C 15: Interchangeable clamping inserts, 1 piece with claws.

  • No. 141056 C 15: Interchangeable clamping inserts, 1 piece with serrated toothing.

  • No. 141057 C 15: Interchangeable clamping inserts, 1 piece with heat treatable surface.

  • No. 141088 Steel body Independent chuck USE, size 710, steel body with reversible one-piece jaws, DIN 55027 -8 spindle mount with studs and lock-nuts.

  • No. 141089 Steel body Independent chuck USE, size 710, steel body with reversible one-piece jaws, DIN 55027 -11 spindle mount with studs and lock-nuts.

  • No. 141092 Steel body Independent chuck USE, size 800, steel body with reversible one-piece jaws, DIN 55027 -8 spindle mount with studs and lock-nuts.

  • No. 141093 Steel body Independent chuck USE, size 800, steel body with reversible one-piece jaws, DIN 55027 -11 spindle mount with studs and lock-nuts.

  • No. 141094 Steel body Independent chuck USE, size 800, steel body with reversible one-piece jaws, DIN 55027 -15 spindle mount with studs and lock-nuts.

  • No. 141097 Steel body Independent chuck USU, size 710, steel body with base jaws and reversible top jaws, DIN 6350 flat back mount, without mounting bolts.

  • No. 141098 Steel body Independent chuck USU, size 710, steel body with base jaws and reversible top jaws, DIN 55027 -8 spindle mount with studs and lock-nuts.

  • No. 141099 Steel body Independent chuck USU, size 710, steel body with base jaws and reversible top jaws, DIN 55027 -11 spindle mount with studs and lock-nuts.

  • No. 141102 Steel body Independent chuck USU, size 710, steel body with base jaws and reversible top jaws, DIN 55029 D1-8 Camlock spindle mount.

  • No. 141103 Steel body Independent chuck USU, size 710, steel body with base jaws and reversible top jaws, DIN 55029 D1-11 Camlock spindle mount.

  • No. 141106 Steel body Independent chuck USU, size 800, steel body with base jaws and reversible top jaws, DIN 6350 flat back mount, without mounting bolts.

  • No. 141107 Steel body Independent chuck USU, size 800, steel body with base jaws and reversible top jaws, DIN 55027 -11 spindle mount with studs and lock-nuts.

  • No. 141111 Steel body Independent chuck USU, size 800, steel body with base jaws and reversible top jaws, DIN 55029 D1-11 Camlock spindle mount.

  • No. 141112 Steel body Independent chuck USU, size 800, steel body with base jaws and reversible top jaws, DIN 55029 D1-15 Camlock spindle mount.

  • No. 141115 Steel body Independent chuck USU, size 1000, steel body with base jaws and reversible top jaws, DIN 55027 -11 spindle mount with studs and lock-nuts.

  • No. 141116 Steel body Independent chuck USU, size 1000, steel body with base jaws and reversible top jaws, DIN 55027 -15 spindle mount with studs and lock-nuts.

  • No. 141119 Steel body Independent chuck USU, size 1000, steel body with base jaws and reversible top jaws, DIN 55029 D1-11 Camlock spindle mount.

  • No. 141120 Steel body Independent chuck USU, size 1000, steel body with base jaws and reversible top jaws, DIN 55029 D1-15 Camlock spindle mount.

  • No. 141414 Steel body Independent chuck USU, size 710, steel body with base jaws and reversible top jaws, DIN 55027 -15 spindle mount with studs and lock-nuts.

  • No. 141418 Steel body Independent chuck USU, size 710, steel body with base jaws and reversible top jaws, DIN 55029 D1-15 Camlock spindle mount.

  • No. 142478 C 15 3-jaw power chuck KFD-HS, with tightening thread, serration 90°. Cylindrical center mount, connection dimensions in acc. with DIN 6353/short taper mount (KK) for ISO 702-1 (DIN 55026/55021).

  • No. 142479 C 15 3-jaw power chuck KFD-HS, with tightening thread, serration 90°. Cylindrical center mount, connection dimensions in acc. with DIN 6353/short taper mount (KK) for ISO 702-1 (DIN 55026/55021).

  • No. 142690 C 15 3-jaw power chuck KFD-HS, with tightening thread, serration 90°. Cylindrical center mount, connection dimensions in acc. with DIN 6353/short taper mount (KK) for ISO 702-1 (DIN 55026/55021).

  • No. 142691 C15 3-jaw power chuck KFD-HS, with tightening thread, serration 90°. Cylindrical center mount, connection dimensions in acc. with DIN 6353/short taper mount (KK) for ISO 702-1 (DIN 55026/55021).

  • No. 142835 Drilling machine vice BOF, size 1, jaw width 90, with V-jaw and normal jaw SBO

  • No. 143163 Base plate with fixing slots, for size 160 Duro-T chucks, complete with mounting screws and fixed T-slot nuts

  • No. 143165 Base plate with fixing slots, for size 200 Duro-T chucks, complete with mounting screws and fixed T-slot nuts

  • No. 143167 Base plate with fixing slots, for size 250 Duro-T chucks, complete with mounting screws and fixed T-slot nuts

  • No. 143692 C 15 3-jaw power chuck KFD-HS, with tightening thread, serration 90°. Cylindrical center mount, connection dimensions in acc. with DIN 6353/short taper mount (KK) for ISO 702-1 (DIN 55026/55021).

  • No. 143726 C15 3-jaw power chuck KFD-HS, with tightening thread, serration 90°. Cylindrical center mount, connection dimensions in acc. with DIN 6353/short taper mount (KK) for ISO 702-1 (DIN 55026/55021).

  • No. 143748 C15 3-jaw power chuck KFD-HS, with tightening thread, serration 90°. Cylindrical center mount, connection dimensions in acc. with DIN 6353/short taper mount (KK) for ISO 702-1 (DIN 55026/55021).

  • No. 143749 C15 3-jaw power chuck KFD-HS, with tightening thread, serration 90°. Cylindrical center mount, connection dimensions in acc. with DIN 6353/short taper mount (KK) for ISO 702-1 (DIN 55026/55021).

  • No. 143750 C15 3-jaw power chuck KFD-HS, with tightening thread, serration 90°. Cylindrical center mount, connection dimensions in acc. with DIN 6353/short taper mount (KK) for ISO 702-1 (DIN 55026/55021).

  • No. 143751 C15 3-jaw power chuck KFD-HS, with tightening thread, serration 90°. Cylindrical center mount, connection dimensions in acc. with DIN 6353/short taper mount (KK) for ISO 702-1 (DIN 55026/55021).

  • No. 143888 C 15 3-jaw power chuck KFD-HS, with tightening thread, serration 90°. Cylindrical center mount, connection dimensions in acc. with DIN 6353/short taper mount (KK) for ISO 702-1 (DIN 55026/55021).

  • No. 143893 C 15 3-jaw power chuck KFD-HS, with tightening thread, serration 90°. Cylindrical center mount, connection dimensions in acc. with DIN 6353/short taper mount (KK) for ISO 702-1 (DIN 55026/55021).

  • No. 144082 C 21: Soft top jaws, 3-jaw set, can be hardened tongue and groove 120° bevelled, material: 16MnCr 5.

  • No. 144258 C 15 3-jaw power chuck KFD-HS, with tightening thread, serration 90°. Cylindrical center mount, connection dimensions in acc. with DIN 6353/short taper mount (KK) for ISO 702-1 (DIN 55026/55021).

  • No. 144259 C 15 3-jaw power chuck KFD-HS, with tightening thread, serration 90°. Cylindrical center mount, connection dimensions in acc. with DIN 6353/short taper mount (KK) for ISO 702-1 (DIN 55026/55021).

  • No. 144260 C15 3-jaw power chuck KFD-HS, with tightening thread, serration 90°. Cylindrical center mount, connection dimensions in acc. with DIN 6353/short taper mount (KK) for ISO 702-1 (DIN 55026/55021).

  • No. 144261 C15 3-jaw power chuck KFD-HS, with tightening thread, serration 90°. Cylindrical center mount, connection dimensions in acc. with DIN 6353/short taper mount (KK) for ISO 702-1 (DIN 55026/55021).

  • No. 144262 C15 3-jaw power chuck KFD-HS, with tightening thread, serration 90°. Cylindrical center mount, connection dimensions in acc. with DIN 6353/short taper mount (KK) for ISO 702-1 (DIN 55026/55021).

  • No. 144263 C15 3-jaw power chuck KFD-HS, with tightening thread, serration 90°. Cylindrical center mount, connection dimensions in acc. with DIN 6353/short taper mount (KK) for ISO 702-1 (DIN 55026/55021).

  • No. 144320 C 21: Claw-type jaws, 1 piece, hardened serration 90°- width of the groove 12.

  • No. 144321 C 21: Claw-type jaws, 1 piece, hardened serration 90°- width of the groove 12.

  • No. 144322 C 21: Claw-type jaws, 1 piece, hardened serration 90°- width of the groove 12.

  • No. 145125 C 15: Intermediate adaptor plates with cylindrical centre mount DIN 6353 for 3-jaw chucks. Mounting from front to ISO 702-1 (DIN 55026/55021) and ASA B 5.9 A1/A2 with metric mounting bolts.

  • No. 145127 C 15: Intermediate adaptor plates with cylindrical centre mount DIN 6353 for 3-jaw chucks. Mounting from front to ISO 702-1 (DIN 55026/55021) and ASA B 5.9 A1/A2 with metric mounting bolts.

  • No. 145129 C 15: Intermediate adaptor plates with cylindrical centre mount DIN 6353 for 3-jaw chucks. Mounting from front to ISO 702-1 (DIN 55026/55021) and ASA B 5.9 A1/A2 with metric mounting bolts.

  • No. 145131 C 15: Intermediate adaptor plates with cylindrical centre mount DIN 6353 for 3-jaw chucks. Mounting from front to ISO 702-1 (DIN 55026/55021) and ASA B 5.9 A1/A2 with metric mounting bolts.

  • No. 145135 C 15: Intermediate adaptor plates with cylindrical centre mount DIN 6353 for 3-jaw chucks. Mounting from front to ISO 702-1 (DIN 55026/55021) and ASA B 5.9 A1/A2 with metric mounting bolts.

  • No. 145139 C 15: Intermediate adaptor plates with cylindrical centre mount DIN 6353 for 3-jaw chucks. Mounting from front to ISO 702-1 (DIN 55026/55021) and ASA B 5.9 A1/A2 with metric mounting bolts.

  • No. 145143 C 15: Intermediate adaptor plates with cylindrical centre mount DIN 6353 for 3-jaw chucks. Mounting from front to ISO 702-1 (DIN 55026/55021) and ASA B 5.9 A1/A2 with metric mounting bolts.

  • No. 145147 C 15: Intermediate adaptor plates with cylindrical centre mount DIN 6353 for 3-jaw chucks. Mounting from front to ISO 702-1 (DIN 55026/55021) and ASA B 5.9 A1/A2 with metric mounting bolts.

  • No. 145153 C 15: Intermediate adaptor plates with cylindrical centre mount DIN 6353 for 3-jaw chucks. Mounting from front to ISO 702-1 (DIN 55026/55021) and ASA B 5.9 A1/A2 with metric mounting bolts.

  • No. 145155 C 15: Intermediate adaptor plates with cylindrical centre mount DIN 6353 for 3-jaw chucks. Mounting from front to ISO 702-1 (DIN 55026/55021) and ASA B 5.9 A1/A2 with metric mounting bolts.

  • No. 145157 C 15: Intermediate adaptor plates with cylindrical centre mount DIN 6353 for 3-jaw chucks. Mounting from front to ISO 702-1 (DIN 55026/55021) and ASA B 5.9 A1/A2 with metric mounting bolts.

  • No. 145159 C 15: Intermediate adaptor plates with cylindrical centre mount DIN 6353 for 3-jaw chucks. Mounting from front to ISO 702-1 (DIN 55026/55021) and ASA B 5.9 A1/A2 with metric mounting bolts.

  • No. 145161 C 15: Intermediate adaptor plates with cylindrical centre mount DIN 6353 for 3-jaw chucks. Mounting from front to ISO 702-1 (DIN 55026/55021) and ASA B 5.9 A1/A2 with metric mounting bolts.

  • No. 145297 C 15: Intermediate adaptor plates with cylindrical centre mount DIN 6353 for 3-jaw chucks. Mounting from front to ISO 702-1 (DIN 55026/55021) and ASA B 5.9 A1/A2 with metric mounting bolts.

  • No. 147259 C 21: Claw-type jaws, 1 piece, hardened serration 90°- width of the groove 10.

  • No. 147261 C 21: Claw-type jaws, 1 piece, hardened serration 90°- width of the groove 10.

  • No. 147281 C 15 2-jaw power chuck KFD-HS, with tightening thread, serration 90°. Cylindrical center mount, connection dimensions in acc. with DIN 6353/short taper mount (KK) for ISO 702-1 (DIN 55026/55021).

  • No. 147282 C 15 2-jaw power chuck KFD-HS, with tightening thread, serration 90°. Cylindrical center mount, connection dimensions in acc. with DIN 6353/short taper mount (KK) for ISO 702-1 (DIN 55026/55021).

  • No. 147285 C 15 2-jaw power chuck KFD-HS, with tightening thread, serration 90°. Cylindrical center mount, connection dimensions in acc. with DIN 6353/short taper mount (KK) for ISO 702-1 (DIN 55026/55021).

  • No. 147286 C 15 2-jaw power chuck KFD-HS, with tightening thread, serration 90°. Cylindrical center mount, connection dimensions in acc. with DIN 6353/short taper mount (KK) for ISO 702-1 (DIN 55026/55021).

  • No. 147501 Self-centering Geared Scroll Lathe Chuck ZSU, Base jaws and reversible top jaws, size 700, 3-jaw, steel body, DIN 6350 flat back mount.

  • No. 147515 Self-centering Geared Scroll Lathe Chuck ZSU, Base jaws and reversible top jaws, size 700, 4-jaw, steel body, DIN 6350 flat back mount.

  • No. 148023 C 15 2-jaw power chuck KFD-HS, with tightening thread, serration 90°. Cylindrical center mount, connection dimensions in acc. with DIN 6353/short taper mount (KK) for ISO 702-1 (DIN 55026/55021).

  • No. 148031 C 15 2-jaw power chuck KFD-HS, with tightening thread, serration 90°. Cylindrical center mount, connection dimensions in acc. with DIN 6353/short taper mount (KK) for ISO 702-1 (DIN 55026/55021).

  • No. 148036 C 15 2-jaw power chuck KFD-HS, with tightening thread, serration 90°. Cylindrical center mount, connection dimensions in acc. with DIN 6353/short taper mount (KK) for ISO 702-1 (DIN 55026/55021).

  • No. 148545 NC-Compact vice RKK, size 3, jaw width 135, with standard jaws SA and normal jaw SGN

  • No. 148682 NC-Compact vice RKK, size 4, jaw width 160, with standard jaws SA and normal jaw SGN

  • No. 148757 Lever Scroll Chuck KRF, size 110, 3-jaw, with clamping pin, with one set outward stepped and one set inward stepped jaws, DIN 6350 flat back mount, cast iron body

  • No. 148772 Lever Scroll Chuck KRF, size 110, 4-jaw, with clamping pin, with one set outward stepped and one set inward stepped jaws, DIN 6350 flat back mount, cast iron body

  • No. 148793 Lever Scroll Chuck KRF, size 70, 3-jaw, with clamping pin, with one set outward stepped and one set inward stepped jaws, DIN 6350 flat back mount, cast iron body

  • No. 148794 Lever Scroll Chuck KRF, size 70, 4-jaw, with clamping pin, with one set outward stepped and one set inward stepped jaws, DIN 6350 flat back mount, cast iron body

  • No. 149352 C 21: Reversible top jaws, hardened serration 90°- material: 16 MnCr 5. 3-jaw set.

  • No. 149353 C 21: Soft top jaws, can be hardened serration 90°- material: 16 MnCr 5. 3-jaw set.

  • No. 149371 NC-Compact vice RKK, size 5, jaw width 200, with standard jaws SA and normal jaw SGN

  • No. 149405 C 15 3-jaw power chuck KFD-HS, with tightening thread, serration 90°. Cylindrical center mount, connection dimensions in acc. with DIN 6353/short taper mount (KK) for ISO 702-1 (DIN 55026/55021).

  • No. 149406 C 15 3-jaw power chuck KFD-HS, with tightening thread, serration 90°. Cylindrical center mount, connection dimensions in acc. with DIN 6353/short taper mount (KK) for ISO 702-1 (DIN 55026/55021).

  • No. 149543 C 15 3-jaw power chuck KFD-HS, with tightening thread, with tongue and groove. Cylindrical center mount, connection dimensions in acc. with DIN 6353/short taper mount (KK) for ISO 702-1 (DIN 55026/55021).

  • No. 149846 C 15 3-jaw power chuck KFD-HS, with tightening thread, with tongue and groove. Cylindrical center mount, connection dimensions in acc. with DIN 6353/short taper mount (KK) for ISO 702-1 (DIN 55026/55021).

  • No. 149920 C 21: Claw-type jaws, 1 piece, hardened serration 90°- width of the groove 10.

  • No. 149921 C 21: Claw-type jaws, 1 piece, hardened serration 90°- width of the groove 10.

  • No. 149922 C 21: Claw-type jaws, 1 piece, hardened serration 90°- width of the groove 10.

  • No. 150500 Steel body Independent chuck USU, size 1100, steel body with base jaws and reversible top jaws, DIN 55027 -11 spindle mount with studs and lock-nuts.

  • No. 150501 Steel body Independent chuck USU, size 1200, steel body with base jaws and reversible top jaws, DIN 55027 -11 spindle mount with studs and lock-nuts.

  • No. 150504 Steel body Independent chuck USU, size 1100, steel body with base jaws and reversible top jaws, DIN 55029 D1-11 Camlock spindle mount.

  • No. 150505 Steel body Independent chuck USU, size 1200, steel body with base jaws and reversible top jaws, DIN 55029 D1-11 Camlock spindle mount.

  • No. 150757 Lever Scroll Chuck KRF, size 125, 3-jaw, with clamping pin, with one set outward stepped and one set inward stepped jaws, DIN 6350 flat back mount, cast iron body

  • No. 150758 Lever Scroll Chuck KRF, size 125, 4-jaw, with clamping pin, with one set outward stepped and one set inward stepped jaws, DIN 6350 flat back mount, cast iron body

  • No. 150759 Lever Scroll Chuck KRF, size 160, 3-jaw, with clamping pin, with one set outward stepped and one set inward stepped jaws, DIN 6350 flat back mount, cast iron body

  • No. 150760 Lever Scroll Chuck KRF, size 160, 4-jaw, with clamping pin, with one set outward stepped and one set inward stepped jaws, DIN 6350 flat back mount, cast iron body

  • No. 150761 Lever Scroll Chuck KRF, size 200, 3-jaw, with clamping pin, with one set outward stepped and one set inward stepped jaws, DIN 6350 flat back mount, cast iron body

  • No. 150762 Lever Scroll Chuck KRF, size 200, 4-jaw, with clamping pin, with one set outward stepped and one set inward stepped jaws, DIN 6350 flat back mount, cast iron body

  • No. 151342 NC-Compact vice RKK, size 2a, jaw width 113, with standard jaws SA and normal jaw SGN

  • No. 151532 C 15 3-jaw power chuck KFD-HS, with tightening thread, with tongue and groove. Cylindrical center mount, connection dimensions in acc. with DIN 6353/short taper mount (KK) for ISO 702-1 (DIN 55026/55021).

  • No. 153182 C 15 3-jaw power chuck KFD-HS, with tightening thread, with tongue and groove. Cylindrical center mount, connection dimensions in acc. with DIN 6353/short taper mount (KK) for ISO 702-1 (DIN 55026/55021).

  • No. 153394 NC power vice RBA, size 1, jaw width 92, standard version

  • No. 153395 NC power vice RBA, size 2, jaw width 113, standard version

  • No. 153396 NC power vice RBA, size 3, jaw width 135, standard version

  • No. 153397 NC power vice RBA, size 4, jaw width 160, standard version

  • No. 154031 C 15 3-jaw power chuck KFD-HE, serration 90°, Adaptor recess, mounting dimensions to DIN 6353

  • No. 154032 C 15 3-jaw power chuck KFD-HE, serration 90°, Adaptor recess, mounting dimensions to DIN 6353

  • No. 154239 C 15 3-jaw power chuck KFD-HS, with tightening thread, with tongue and groove. Cylindrical center mount, connection dimensions in acc. with DIN 6353/short taper mount (KK) for ISO 702-1 (DIN 55026/55021).

  • No. 154384 C 15 3-jaw power chuck KFD-HE, serration 90°, Adaptor recess, mounting dimensions to DIN 6353

  • No. 154390 C 15 3-jaw power chuck KFD-HE, serration 60°, with pre-machined draw tube-connector, Adaptor recess, mounting dimensions to DIN 6353

  • No. 154391 C 15 3-jaw power chuck KFD-HE, serration 60°, with pre-machined draw tube-connector, Adaptor recess, mounting dimensions to DIN 6353

  • No. 154392 C 15 3-jaw power chuck KFD-HE, serration 60°, with pre-machined draw tube-connector, Adaptor recess, mounting dimensions to DIN 6353

  • No. 154674 C 21: Reversible top jaws, 3-jaw set, hardened serration 60° - material: 16 MnCr 5.

  • No. 154676 C 21: Reversible top jaws, 3-jaw set, hardened serration 60° - material: 16 MnCr 5.

  • No. 154678 C 21: Reversible top jaws, 3-jaw set, hardened serration 60° - material: 16 MnCr 5.

  • No. 154816 C 21: Reversible top jaws, 3-jaw set, hardened serration 60° - material: 16 MnCr 5.

  • No. 154829 C 15 3-jaw power chuck KFD-HE, serration 90°, Adaptor recess, mounting dimensions to DIN 6353

  • No. 154830 C 15 3-jaw power chuck KFD-HE, serration 60°, with pre-machined draw tube-connector, Adaptor recess, mounting dimensions to DIN 6353

  • No. 154865 C 21: Soft top jaws, 3-jaw set, can be hardened serration 60° - material: 16 MnCr 5.

  • No. 154867 C 21: Soft top jaws, 3-jaw set, can be hardened serration 60° - material: 16 MnCr 5.

  • No. 154869 C 21: Soft top jaws, 3-jaw set, can be hardened serration 60° - material: 16 MnCr 5.

  • No. 154871 C 21: Soft top jaws, 3-jaw set, can be hardened serration 60° - material: 16 MnCr 5.

  • No. 155099 C 15 3-jaw power chuck KFD-HS, with tightening thread, with tongue and groove. Cylindrical center mount, connection dimensions in acc. with DIN 6353/short taper mount (KK) for ISO 702-1 (DIN 55026/55021).

  • No. 156025 C 21: Claw-type jaws, 1 piece, hardened serration 60° - width of the groove 12.

  • No. 156027 C 21: Claw-type jaws, 1 piece, hardened serration 60° - width of the groove 12.

  • No. 156029 C 21: Claw-type jaws, 1 piece, hardened serration 60° - width of the groove 12.

  • No. 156099 C 21: Claw-type jaws, 1 piece, hardened serration 60° - width of the groove 16.

  • No. 156101 C 21: Claw-type jaws, 1 piece, hardened serration 60° - width of the groove 16.

  • No. 156103 C 21: Claw-type jaws, 1 piece, hardened serration 60° - width of the groove 16.

  • No. 156105 C 21: Claw-type jaws, 1 piece, hardened serration 60° - width of the groove 16.

  • No. 156580 C 15 3-jaw power chuck KFD-HS, with tightening thread, with tongue and groove. Cylindrical center mount, connection dimensions in acc. with DIN 6353/short taper mount (KK) for ISO 702-1 (DIN 55026/55021).

  • No. 156789 Radially Adjustable Self-Centering Geared Scroll Lathe Chuck , ZSU, size 160, 3-jaw, Hi-tru, with (4) Radially Oposing Adjust Set Screws, Steel Body, Base jaws and reversible top jaws, US Standard T&G.

  • No. 156791 Radially Adjustable Self-Centering Geared Scroll Lathe Chuck , ZSU, size 210, 3-jaw, Hi-tru, with (4) Radially Oposing Adjust Set Screws, Steel Body, Base jaws and reversible top jaws, US Standard T&G.

  • No. 156793 Radially Adjustable Self-Centering Geared Scroll Lathe Chuck , ZSU, size 250, 3-jaw, Hi-tru, with (4) Radially Oposing Adjust Set Screws, Steel Body, Base jaws and reversible top jaws, US Standard T&G.

  • No. 156795 Radially Adjustable Self-Centering Geared Scroll Lathe Chuck , ZSU, size 315, 3-jaw, Hi-tru, with (4) Radially Oposing Adjust Set Screws, Steel Body, Base jaws and reversible top jaws, US Standard T&G.

  • No. 157768 C 15 3-jaw power chuck KFD-HS, with tightening thread, with tongue and groove. Cylindrical center mount, connection dimensions in acc. with DIN 6353/short taper mount (KK) for ISO 702-1 (DIN 55026/55021).

  • No. 158136 DIN 55026 A2-5 Spindle Adapter For ZSU-160-Hi-tru USA Design Radially Adjustable Lathe Chuck

  • No. 158137 DIN 55026 A2-6 Spindle Adapter For ZSU-160-Hi-tru USA Design Radially Adjustable Lathe Chuck

  • No. 158138 DIN 55026 A2-5 Spindle Adapter For ZSU-210-Hi-tru USA Design Radially Adjustable Lathe Chuck

  • No. 158139 DIN 55026 A2-6 Spindle Adapter For ZSU-210-Hi-tru USA Design Radially Adjustable Lathe Chuck

  • No. 158140 DIN 55026 A2-5 Spindle Adapter For ZSU-250-Hi-tru USA Design Radially Adjustable Lathe Chuck

  • No. 158141 DIN 55026 A2-6 Spindle Adapter For ZSU-250-Hi-tru USA Design Radially Adjustable Lathe Chuck

  • No. 158142 DIN 55026 A2-8 Spindle Adapter For ZSU-250-Hi-tru USA Design Radially Adjustable Lathe Chuck

  • No. 158143 DIN 55026 A2-5 Spindle Adapter For ZSU-315-Hi-tru USA Design Radially Adjustable Lathe Chuck

  • No. 158144 DIN 55026 A2-6 Spindle Adapter For ZSU-315-Hi-tru USA Design Radially Adjustable Lathe Chuck

  • No. 158145 DIN 55026 A2-8 Spindle Adapter For ZSU-315-Hi-tru USA Design Radially Adjustable Lathe Chuck

  • No. 158148 DIN 55029 D1-4 Camlock Spindle Adapter For ZSU-160-Hi-tru USA Design Radially Adjustable Lathe Chuck

  • No. 158149 DIN 55029 D1-5 Camlock Spindle Adapter For ZSU-160-Hi-tru USA Design Radially Adjustable Lathe Chuck

  • No. 158150 DIN 55029 D1-6 Camlock Spindle Adapter For ZSU-160-Hi-tru USA Design Radially Adjustable Lathe Chuck

  • No. 158151 DIN 55029 D1-4 Camlock Spindle Adapter For ZSU-210-Hi-tru USA Design Radially Adjustable Lathe Chuck

  • No. 158152 DIN 55029 D1-5 Camlock Spindle Adapter For ZSU-210-Hi-tru USA Design Radially Adjustable Lathe Chuck

  • No. 158153 DIN 55029 D1-6 Camlock Spindle Adapter For ZSU-210-Hi-tru USA Design Radially Adjustable Lathe Chuck

  • No. 158154 DIN 55029 D1-8 Camlock Spindle Adapter For ZSU-210-Hi-tru USA Design Radially Adjustable Lathe Chuck

  • No. 158155 DIN 55029 D1-5 Camlock Spindle Adapter For ZSU-250-Hi-tru USA Design Radially Adjustable Lathe Chuck

  • No. 158156 DIN 55029 D1-6 Camlock Spindle Adapter For ZSU-250-Hi-tru USA Design Radially Adjustable Lathe Chuck

  • No. 158157 DIN 55029 D1-8 Camlock Spindle Adapter For ZSU-250-Hi-tru USA Design Radially Adjustable Lathe Chuck

  • No. 158158 DIN 55029 D1-6 Camlock Spindle Adapter For ZSU-315-Hi-tru USA Design Radially Adjustable Lathe Chuck

  • No. 158159 DIN 55029 D1-8 Camlock Spindle Adapter For ZSU-315-Hi-tru USA Design Radially Adjustable Lathe Chuck

  • No. 158160 DIN 55029 D1-11 Camlock Spindle Adapter For ZSU-315-Hi-tru USA Design Radially Adjustable Lathe Chuck

  • No. 161189 C 21: Claw-type jaws, 1 piece, hardened serration 60° - width of the groove 12.

  • No. 161725 C15 3-jaw power chuck KFD-HS, with tightening thread, serration 90°. Cylindrical center mount, connection dimensions in acc. with DIN 6353/short taper mount (KK) for ISO 702-1 (DIN 55026/55021).

  • No. 161825 Machine vice MSR, jaw width 175, with draw-down jaws

  • No. 161826 Machine vice MSR, jaw width 150, clamping capacity 300, with draw-down jaws

  • No. 161827 Machine vice MSR, jaw width 150, clamping capacity 200, with draw-down jaws

  • No. 161828 Machine vice MSR, jaw width 125, with draw-down jaws

  • No. 161830 NC-Compact twin vice RKD, jaw width 92, with reversible stepped jaws and centre jaw

  • No. 162640 NC-Compact vice RKK, size 1, jaw width 92, with standard jaws SA and normal jaw SGN

  • No. 162653 NC-Compact twin vice RKD-M, jaw width 92, with reversible stepped jaws and centre jaw

  • No. 162654 NC-Compact twin vice RKD-M, jaw width 125, with reversible stepped jaws and centre jaw

  • No. 162655 NC-Compact twin vice RKD, jaw width 125, with reversible stepped jaws and centre jaw

  • No. 162656 NC-Compact self centering vice RKZ, jaw width 125, with stepped jaws

  • No. 162995 C 15 2-jaw power chuck KFD-HS, with tightening thread, serration 90°. Cylindrical center mount, connection dimensions in acc. with DIN 6353/short taper mount (KK) for ISO 702-1 (DIN 55026/55021).

  • No. 163392 NC-Compact vice RKE-LV, jaw width 125, with reversible stepped jaws

  • No. 164390 NC-Compact self centering vice RKZ-M, jaw width 125, with stepped jaws

  • No. 164813 NC-Compact self centering vice RKZ-M, jaw width 50, with stepped jaws

  • No. 164814 NC-Compact self centering vice RKZ-M, jaw width 70, with stepped jaws

  • No. 164815 NC-Compact self centering vice RKZ-M, jaw width 92, with stepped jaws

  • No. 165851 NC-Compact vice RKE-LV, jaw width 125, with carrier jaws

  • No. 170001 RPP-64-1

  • No. 170002 RPP-64-2

  • No. 170003 RPP-64-1/GA

  • No. 170004 RPP-64-2/GA

  • No. 170005 RPP-64-1/GI

  • No. 170006 RPP-64-2/GI

  • No. 170007 RPP-80-1

  • No. 170008 RPP-80-2

  • No. 170009 RPP-80-1/GA

  • No. 170010 RPP-80-2/GA

  • No. 170011 RPP-80-1/GI

  • No. 170012 RPP-80-2/GI

  • No. 170013 RPP-100-1

  • No. 170014 RPP-100-2

  • No. 170015 RPP-100-1/GA

  • No. 170016 RPP-100-2/GA

  • No. 170018 RPP-100-1/GI

  • No. 170019 RPP-100-2/GI

  • No. 170020 RPP-125-1

  • No. 170021 RPP-125-2

  • No. 170022 RPP-125-1/GA

  • No. 170023 RPP-125-2/GA

  • No. 170025 RPP-125-1/GI

  • No. 170026 RPP-125-2/GI

  • No. 170029 RPP-160-1

  • No. 170030 RPP-160-2

  • No. 170031 RPP-160-1/GA

  • No. 170032 RPP-160-2/GA

  • No. 170033 RPP-160-1/GI

  • No. 170034 RPP-160-2/GI

  • No. 170035 RPP-200-1

  • No. 170036 RPP-200-2

  • No. 170037 RPP-200-1/GA

  • No. 170038 RPP-200-2/GA

  • No. 170039 RPP-200-1/GI

  • No. 170040 RPP-200-2/GI

  • No. 170041 RPP-300-1

  • No. 170042 RPP-300-2

  • No. 170043 RPP-300-1/GA

  • No. 170044 RPP-300-2/GA

  • No. 170045 RPP-300-1/GI

  • No. 170046 RPP-300-2/GI

  • No. 170050 RZP-64-1

  • No. 170051 RZP-64-2

  • No. 170052 RZP-64-1/GA

  • No. 170053 RZP-64-2/GA

  • No. 170054 RZP-64-1/GI

  • No. 170055 RZP-64-2/GI

  • No. 170056 RZP-80-1

  • No. 170057 RZP-80-2

  • No. 170058 RZP-80-1/GA

  • No. 170059 RZP-80-2/GA

  • No. 170060 RZP-80-1/GI

  • No. 170061 RZP-80-2/GI

  • No. 170062 RZP-100-1

  • No. 170063 RZP-100-2

  • No. 170064 RZP-100-1/GA

  • No. 170065 RZP-100-2/GA

  • No. 170066 RZP-100-1/GI

  • No. 170067 RZP-100-2/GI

  • No. 170068 RZP-125-1

  • No. 170069 RZP-125-2

  • No. 170070 RZP-125-1/GA

  • No. 170071 RZP-125-2/GA

  • No. 170072 RZP-125-1/GI

  • No. 170073 RZP-125-2/GI

  • No. 170074 RZP-160-1

  • No. 170075 RZP-160-2

  • No. 170076 RZP-160-1/GA

  • No. 170077 RZP-160-2/GA

  • No. 170078 RZP-160-1/GI

  • No. 170079 RZP-160-2/GI

  • No. 170080 RZP-200-1

  • No. 170081 RZP-200-2

  • No. 170082 RZP-200-1/GA

  • No. 170083 RZP-200-2/GA

  • No. 170084 RZP-200-1/GI

  • No. 170085 RZP-200-2/GI

  • No. 170086 RZP-240-1

  • No. 170087 RZP-240-2

  • No. 170088 RZP-240-1/GA

  • No. 170089 RZP-240-2/GA

  • No. 170090 RZP-240-1/GI

  • No. 170091 RZP-240-2/GI

  • No. 170092 RZP-300-1

  • No. 170093 RZP-300-2

  • No. 170094 RZP-300-1/GA

  • No. 170095 RZP-300-2/GA

  • No. 170096 RZP-300-1/GI

  • No. 170097 RZP-300-2/GI

  • No. 170100 RPP-240-1

  • No. 170101 RPP-240-2

  • No. 170102 RPP-240-1/GA

  • No. 170103 RPP-240-2/GA

  • No. 170104 RPP-240-1/GI

  • No. 170105 RPP-240-2/GI

  • No. 170119 RPP-50-1

  • No. 170120 RPP-50-2

  • No. 170121 RPP-50-1/GA

  • No. 170122 RPP-50-2/GA

  • No. 170123 RPP-50-1/GI

  • No. 170124 RPP-50-2/GI

  • No. 172113 RPP-380-1

  • No. 172114 RPP-380-2

  • No. 172115 RPP-380-1/GA

  • No. 172116 RPP-380-2/GA

  • No. 172117 RPP-380-1/GI

  • No. 172118 RPP-380-2/GI

  • No. 178411 NC-Compact vice RKE basic, jaw width 92, with stepped jaws

  • No. 178412 NC-Compact vice RKE basic, jaw width 125, with stepped jaws

  • No. 178413 NC-Compact vice RKE basic, jaw width 160, with stepped jaws

  • No. 178414 NC-Compact vice RKE basic, jaw width 200, with stepped jaws

  • No. 178910 CENTRIC CLAMPPING VICE RZM-125 GK260

  • No. 178911 CENTRIC CLAMPING VICE RZM-125 GK180

  • No. 179075 VICE RB-K-92

  • No. 179076 VICE RB-K-113

  • No. 179077 VICE RB-K-135

  • No. 179078 VICE RB-K-160

  • No. 179079 VICE RB-K-200

  • No. 179080 VICE RB-M-92

  • No. 179081 VICE RB-M-113

  • No. 179082 VICE RB-M-135

  • No. 179083 VICE RB-M-160

  • No. 179084 VICE RB-M-200

  • No. 201034 Key-Type Drill Chuck Prima, Clamping Capacity 3/16"-3/4", Mount J4

  • No. 205036 Revolving tailstock center - Tip angle 60°, Mount MT 3, Size 106, HG with draw-off nut

  • No. 205989 Drill chuck key with DIN-toothing 6349 for Key-type drill chuck, Size S2 A

  • No. 207148 Revolving tailstock center - Tip angle 60°, Mount MT 4, Size 108, HG with draw-off nut

  • No. 207440 Revolving tailstock center - Tip Angle 60, Mount MT 3, Size 503, AC Control Standard Units

  • No. 207441 Revolving tailstock center - Tip Angle 60, Mount MT 4, Size 504, AC Control Standard Units

  • No. 207442 Revolving tailstock center - Tip Angle 60, Mount MT 5, Size 505, AC Control Standard Units

  • No. 207443 Revolving tailstock center - Tip Angle 60, Mount MT 6, Size 506, AC Control Standard Units

  • No. 208881 Key-Type Drill Chuck Prima-M, Clamping Capacity 1/32"-3/8", Mount 3/8"-24, S2 Key

  • No. 212057 S19 Drill Chuck Key

  • No. 215000 BB13-3 Ball Bearing Heavy Duty Key-Type Drill Chuck, Clamping Capacity 1/32" - 1/2", Mount J3, S10 Key

  • No. 215001 BB16-3 Ball Bearing Heavy Duty Key-Type Drill Chuck, Clamping Capacity 1/32" - 5/8", Mount J3, S10 Key

  • No. 215002 BB20-4 Ball Bearing Heavy Duty Key-Type Drill Chuck, Clamping Capacity 3/16" - 3/4", Mount J4, S13 Key

  • No. 215003 BB26-5 Ball Bearing Heavy Duty Key-Type Drill Chuck, Clamping Capacity 3/16" - 1-1/32", Mount J5, S13 Key

  • No. 216569 C 15: Mounting screws.

  • No. 218555 Key-Type Drill Chuck Prima M, Size 10M, B12 Mount, 37mm Diameter, 1-10mm Clamping Capacity, S2 A Key Size

  • No. 220206 Jaw cutting attachment, size 0, for chuck size 125, for 3 jaw chucks

  • No. 220207 Jaw cutting attachment, size 1, for chuck size 200, for 3 jaw chucks

  • No. 220208 Jaw cutting attachment, size 2, for chuck size 250, for 3 jaw chucks

  • No. 220209 Jaw cutting attachment, size 3, for chuck size 250, for 3 jaw chucks

  • No. 220210 Jaw cutting attachment, size 4, for chuck size 315, for 3 jaw chucks

  • No. 220211 Jaw cutting attachment, size 5, for chuck size 400, for 3 jaw chucks

  • No. 221016 Revolving tailstock center - Tip angle 60°, Mount MT 5, Size 110, HM carbide-tipped

  • No. 221017 Revolving tailstock center - Tip angle 60°, Mount MT 6, Size 114, HM carbide-tipped

  • No. 221018 Revolving tailstock center - Tip angle 60°, Mount MT 2, Size 102, HG with draw-off nut

  • No. 221019 Revolving tailstock center - Tip angle 60°, Mount MT 3, Size 104, HG with draw-off nut

  • No. 221020 Revolving tailstock center - Tip angle 60°, Mount MT 6, Size 114, HG with draw-off nut

  • No. 221021 Revolving tailstock center - Tip angle 60°, Mount MT 2, Size 102, HMG with draw-off nut with carbide insert

  • No. 221022 Revolving tailstock center - Tip angle 60°, Mount MT 3, Size 104, HMG with draw-off nut with carbide insert

  • No. 221023 Revolving tailstock center - Tip angle 60°, Mount MT 3, Size 106, HMG with draw-off nut with carbide insert

  • No. 221024 Revolving tailstock center - Tip angle 60°, Mount MT 4, Size 108, HMG with draw-off nut with carbide insert

  • No. 221025 Revolving tailstock center - Tip angle 60°, Mount MT 5, Size 110, HMG with draw-off nut with carbide insert

  • No. 221026 Revolving tailstock center - Tip angle 60°, Mount MT 6, Size 114, HMG with draw-off nut with carbide insert

  • No. 221398 Dead center, Mount MT 4, DIN 806, full point, ground only, carbide-tipped full point

  • No. 221605 Revolving centering taper, Mount MT 3, Size 173, bull nose, 60°

  • No. 222235 Revolving tailstock center - Tip Angle 60, Mount MT 4, Size 504, AC-VL Control Standard Units

  • No. 222324 Revolving tailstock center - Tip Angle 60, Mount MT 3, Size 503, AC-VL Control Standard Units

  • No. 222325 Revolving tailstock center - Tip Angle 60, Mount MT 4, Size 504, AC-VL Control Standard Units

  • No. 222326 Revolving tailstock center - Tip Angle 60, Mount MT 5, Size 505, AC-VL Control Standard Units

  • No. 222327 Revolving tailstock center - Tip Angle 60, Mount MT 6, Size 506, AC-VL Control Standard Units

  • No. 227152 Key-Type Drill Chuck Prima M, Size 16M, Mount B16 Mount, Clamping Capacity 3-16mm, S3 Key

  • No. 228620 Interchangeable insert for Revolving tailstock center, Size 102, B for centerless workpieces 60°

  • No. 228621 Interchangeable insert for Revolving tailstock center, Size 106, B for centerless workpieces 60°

  • No. 228622 Interchangeable insert for Revolving tailstock center, Size 108, B for centerless workpieces 60°

  • No. 233030 C 15: Mounting screws.

  • No. 233058 C 15: Mounting screws.

  • No. 234695 Threaded pin, Size M 4 x 6

  • No. 237413 Revolving tailstock center - Tip angle 60°, Mount MT 3, Size 106, HM carbide-tipped

  • No. 245485 Key-type drill chuck Prima M, Size 8M, Mount B10, Clamping capacity 0.5-8, slight intermediate sizes

  • No. 245548 Key-type drill chuck Prima, Size 6, Mount B12, Clamping capacity 0.5-6.5, heavy industrial version

  • No. 245549 Key-Type Drill Chuck Prima 8, Clamping Capacity 0.5-8mm, Mount B12, S2 A Key

  • No. 245550 Key-type drill chuck Prima M, Size 8M, Mount B12, Clamping capacity 0.5-8, slight intermediate sizes

  • No. 245552 Key-type drill chuck Prima M, Size 8M, Mount 3/8"-24, Clamping capacity 0.5-8, slight intermediate sizes

  • No. 245553 Key-type drill chuck Prima M, Size 8M, Mount 1/2"-20, Clamping capacity 0.5-8, slight intermediate sizes

  • No. 245586 Key-type drill chuck Prima M, Size 6M, Mount B10, Clamping capacity 0.5-6.5, slight intermediate sizes

  • No. 249576 Dead center, Mount MT 3, similar DIN 807, full point with draw-off nut and SW, with extended point material tool steel

  • No. 249577 Dead center, Mount MT 4, similar DIN 807, full point with draw-off nut and SW, with extended point material tool steel

  • No. 249578 Dead center, Mount MT 5, similar DIN 807, full point with draw-off nut and SW, with extended point material tool steel

  • No. 249579 Dead center, Mount MT 6, similar DIN 807, full point with draw-off nut and SW, with extended point material tool steel

  • No. 249804 Quick-action drill chuck Supra-SK, Size SK 13S, Mount 1/2"-20, Clamping capacity 1-13 impact resistant

  • No. 249910 Quick-action drill chuck Supra-SK, Size SK 10S, Mount 3/8"-24, Clamping capacity 0.5-10 impact resistant

  • No. 249925 Quick-action drill chuck Supra-SK, Size SK 10S, Mount 1/2"-20, Clamping capacity 0.5-10 impact resistant

  • No. 289188 C 15: Changeable workpiece rests (in different lengths).

  • No. 301556 Revolving centering taper, Mount MT 2, Size 172, bull nose, 60°

  • No. 301557 Revolving centering taper, Mount MT 3, Size 172a, bull nose, 60°

  • No. 301558 Revolving centering taper, Mount MT 4, Size 172b, bull nose, 60°

  • No. 301559 Revolving centering taper, Mount MT 2, Size 172, bull nose, 75°

  • No. 301560 Revolving centering taper, Mount MT 3, Size 172a, bull nose, 75°

  • No. 301561 Revolving centering taper, Mount MT 4, Size 172b, bull nose, 75°

  • No. 301616 Revolving centering taper, Mount MT 2, Size 171a, bull nose, 60°

  • No. 301696 Revolving tailstock center - Tip angle 60°, Mount MT 6, Size 426, for high load at high speeds

  • No. 303598 Revolving tailstock center - Tip angle 60°, Mount MT 4, Size 424, for high load at high speeds

  • No. 303599 Revolving tailstock center - Tip angle 60°, Mount MT 5, Size 425, for high load at high speeds

  • No. 304521 Revolving tailstock center - Tip angle 60°, Mount MT 4, Size 484, with draw-off nut

  • No. 304522 Revolving tailstock center - Tip angle 60°, Mount MT 5, Size 485, with draw-off nut

  • No. 304523 Revolving tailstock center - Tip angle 60°, Mount MT 6, Size 486, with draw-off nut

  • No. 304562 Revolving centering taper, Mount MT 4, Size 108, interchangeable, 75°

  • No. 304563 Revolving centering taper, Mount MT 5, Size 110, interchangeable, 75°

  • No. 304564 Revolving centering taper, Mount MT 6, Size 114, interchangeable, 75°

  • No. 304565 Suitable inserts for centering tapers AZ, Size 1, for MT 4, Standard version, Tip angle 75°

  • No. 304566 Suitable inserts for centering tapers AZ, Size 2, for MT 4, Standard version, Tip angle 75°

  • No. 304567 Suitable inserts for centering tapers AZ, Size 3, for MT 4, Standard version, Tip angle 75°

  • No. 304568 Suitable inserts for centering tapers AZ, Size 4, for MT 4, Standard version, Tip angle 75°

  • No. 304569 Suitable inserts for centering tapers AZ, Size 5, for MT 4, Standard version, Tip angle 75°

  • No. 304570 Suitable inserts for centering tapers AZ, Size 1, for MT 5, Standard version, Tip angle 75°

  • No. 304571 Suitable inserts for centering tapers AZ, Size 2, for MT 5, Standard version, Tip angle 75°

  • No. 304572 Suitable inserts for centering tapers AZ, Size 3, for MT 5, Standard version, Tip angle 75°

  • No. 304573 Suitable inserts for centering tapers AZ, Size 4, for MT 5, Standard version, Tip angle 75°

  • No. 304574 Suitable inserts for centering tapers AZ, Size 5, for MT 5, Standard version, Tip angle 75°

  • No. 304575 Suitable inserts for centering tapers AZ, Size 1, for MT 6, Standard version, Tip angle 75°

  • No. 304576 Suitable inserts for centering tapers AZ, Size 2, for MT 6, Standard version, Tip angle 75°

  • No. 304577 Suitable inserts for centering tapers AZ, Size 3, for MT 6, Standard version, Tip angle 75°

  • No. 304578 Suitable inserts for centering tapers AZ, Size 4, for MT 6, Standard version, Tip angle 75°

  • No. 304579 Suitable inserts for centering tapers AZ, Size 5, for MT 6, Standard version, Tip angle 75°

  • No. 304580 Fixed shafts, Mount MT 4

  • No. 304581 Fixed shafts, Mount MT 5

  • No. 304582 Fixed shafts, Mount MT 6

  • No. 304583 Revolving centering taper, Mount MT 4, Size 494, with draw-off nut, for high load

  • No. 304584 Revolving centering taper, Mount MT 5, Size 495, with draw-off nut, for high load

  • No. 304585 Revolving centering taper, Mount MT 6, Size 496, with draw-off nut, for high load

  • No. 305188 Quick-action drill chuck Supra-SK, Size SK 10S, Mount B 12, Clamping capacity 0.5-10 impact resistant

  • No. 305203 Quick-action drill chuck Supra-SK, Size SK 13S, Mount B 16, Clamping capacity 1-13 impact resistant

  • No. 305221 Quick-action drill chuck Supra-SK, Size SK 13S, Mount B 12, Clamping capacity 1-13 impact resistant

  • No. 306396 Revolving centering taper, Mount MT 6, Size 276, pointed

  • No. 306402 Dead center, Mount MT 3, DIN 806, full point, ground only, carbide-tipped full point

  • No. 307319 Drill chuck key with Jacobs-toothing, Size S14

  • No. 308555 C 15: Special grease F80 for lathe chucks. For lubrication and conservation of clamping force.

  • No. 308632 Interchangeable insert for Revolving tailstock center, Size 110, B for centerless workpieces 60°

  • No. 309380 Drill chuck key with DIN-toothing 6349 for Key-type drill chuck, Size S2 AT

  • No. 309382 Drill chuck key with DIN-toothing 6349 for Key-type drill chuck, Size S 3T

  • No. 310065 Constant face driver basic body, MT 3, (basic body without centre) CoE mechanical

  • No. 310066 Constant face driver basic body, MT 4, (all basic bodies without centre) CoE mechanical

  • No. 310068 Constant face driver basic body, MT 5, (basic body without centre) CoE mechanical

  • No. 313085 Constant face driver basic body CoA, mechanical compensation, with spring set. To be clamped in lathe chuck over Ø85mm body OD.

  • No. 313905 Constant face driver basic body, KK 5, DIN 55026 mechanicaler compensation, with spring set, CoA mechanical

  • No. 313906 Constant face driver basic body, KK 6, DIN 55026 mechanicaler compensation, with spring set, CoA mechanical

  • No. 313907 Constant face driver basic body, KK 8, DIN 55026 mechanicaler compensation, with spring set, CoA mechanical

  • No. 313910 Constant face driver basic body, ZA 100, in Flanschausführung, with spring set, CoA mechanical

  • No. 317255 Key-type drill chuck Prima S, Size 10S, Mount 3/8"-24, Clamping capacity 0.8-10, slight intermediate sizes

  • No. 317256 Key-type drill chuck Prima S, Size 10S, Mount 1/2"-20, Clamping capacity 0.8-10, slight intermediate sizes

  • No. 317257 Key-type drill chuck Prima S, Size 13S, Mount 1/2"-20, Clamping capacity 1.5-13, slight intermediate sizes

  • No. 318227 Revolving tailstock center - Tip angle 60°, Mount MT 3, Size 106, HP precision version

  • No. 319650 Spindle adapter plate, outer dia. 125, DIN 55027 -3

  • No. 319651 Spindle adapter plate, outer dia. 125, DIN 55027 -4

  • No. 319652 Spindle adapter plate, outer dia. 160, DIN 55027 -3

  • No. 319653 Spindle adapter plate, outer dia. 160, DIN 55027 -4

  • No. 319654 Spindle adapter plate, outer dia. 160, DIN 55027 -5

  • No. 319655 Spindle adapter plate, outer dia. 200, DIN 55027 -4

  • No. 319656 Spindle adapter plate, outer dia. 200, DIN 55027 -5

  • No. 319657 Spindle adapter plate, outer dia. 200, DIN 55027 -6

  • No. 319658 Spindle adapter plate, outer dia. 250, DIN 55027 -4

  • No. 319659 Spindle adapter plate, outer dia. 250, DIN 55027 -5

  • No. 319660 Spindle adapter plate, outer dia. 250, DIN 55027 -6

  • No. 319661 Spindle adapter plate, outer dia. 250, DIN 55027 -8

  • No. 319662 Spindle adapter plate, outer dia. 315, DIN 55027 -5

  • No. 319663 Spindle adapter plate, outer dia. 315, DIN 55027 -6

  • No. 319664 Spindle adapter plate, outer dia. 315, DIN 55027 -8

  • No. 319665 Spindle adapter plate, outer dia. 315, DIN 55027 -11

  • No. 319666 Spindle adapter plate, outer dia. 400, DIN 55027 -6

  • No. 319667 Spindle adapter plate, outer dia. 400, DIN 55027 -8

  • No. 319668 Spindle adapter plate, outer dia. 400, DIN 55027 -11

  • No. 319669 Spindle adapter plate, outer dia. 400, DIN 55027 -15

  • No. 319670 Spindle adapter plate, outer dia. 500, DIN 55027 -8

  • No. 319671 Spindle adapter plate, outer dia. 500, DIN 55027 -11

  • No. 319672 Spindle adapter plate, outer dia. 500, DIN 55027 -15

  • No. 319673 Spindle adapter plate, outer dia. 125, DIN 55029 D1-3 Camlock

  • No. 319674 Spindle adapter plate, outer dia. 125, DIN 55029 D1-4 Camlock

  • No. 319675 Spindle adapter plate, outer dia. 160, DIN 55029 D1-3 Camlock

  • No. 319676 Spindle adapter plate, outer dia. 160, DIN 55029 D1-4 Camlock

  • No. 319677 Spindle adapter plate, outer dia. 160, DIN 55029 D1-5 Camlock

  • No. 319678 Spindle adapter plate, outer dia. 200, DIN 55029 D1-4 Camlock

  • No. 319679 Spindle adapter plate, outer dia. 200, DIN 55029 D1-5 Camlock

  • No. 319680 Spindle adapter plate, outer dia. 200, DIN 55029 D1-6 Camlock

  • No. 319681 Spindle adapter plate, outer dia. 250, DIN 55029 D1-4 Camlock

  • No. 319682 Spindle adapter plate, outer dia. 250, DIN 55029 D1-5 Camlock

  • No. 319683 Spindle adapter plate, outer dia. 250, DIN 55029 D1-6 Camlock

  • No. 319684 Spindle adapter plate, outer dia. 250, DIN 55029 D1-8 Camlock

  • No. 319685 Spindle adapter plate, outer dia. 315, DIN 55029 D1-5 Camlock

  • No. 319686 Spindle adapter plate, outer dia. 315, DIN 55029 D1-6 Camlock

  • No. 319687 Spindle adapter plate, outer dia. 315, DIN 55029 D1-8 Camlock

  • No. 319688 Spindle adapter plate, outer dia. 315, DIN 55029 D1-11 Camlock

  • No. 319689 Spindle adapter plate, outer dia. 400, DIN 55029 D1-6 Camlock

  • No. 319690 Spindle adapter plate, outer dia. 400, DIN 55029 D1-8 Camlock

  • No. 319691 Spindle adapter plate, outer dia. 400, DIN 55029 D1-11 Camlock

  • No. 319692 Spindle adapter plate, outer dia. 400, DIN 55029 D1-15 Camlock

  • No. 319693 Spindle adapter plate, outer dia. 500, DIN 55029 D1-8 Camlock

  • No. 319694 Spindle adapter plate, outer dia. 500, DIN 55029 D1-11 Camlock

  • No. 319695 Spindle adapter plate, outer dia. 500, DIN 55029 D1-15 Camlock

  • No. 326786 Dead center, Mount MT 2, DIN 806, full point, ground only, carbide-tipped full point

  • No. 326816 Dead center, Mount MT 5, DIN 806, full point, ground only, carbide-tipped full point

  • No. 351320 C 21: Reversible top jaws, hardened serration 90°- material: 16 MnCr 5. 3-jaw set.

  • No. 362080 Revolving tailstock center - Tip angle 60°, Mount MT 2, Size 02, with centre point

  • No. 362081 Revolving tailstock center - Tip angle 60°, Mount MT 3, Size 04, with centre point

  • No. 362082 Revolving tailstock center - Tip angle 60°, Mount MT 4, Size 08, with centre point

  • No. 362083 Revolving tailstock center - Tip angle 60°, Mount MT 5, Size 10, with centre point

  • No. 362084 Revolving tailstock center - Tip angle 60°, Mount MT 6, Size 14, with centre point

  • No. 368292 Key-type drill chuck Prima, Size 6L, Mount E6,3, Clamping capacity 0.5-6.5, in particular for screwdrivers with 1/4" hexagonal take-up

  • No. 370778 Precision vice PS-SV, size 1, jaw width 70, front swivelling axis

  • No. 370779 Precision vice PS-SV, size 2, jaw width 90, front swivelling axis

  • No. 370782 Precision sine vice PS-ZD, size 1, jaw width 70, precision vice PS-ZD 2-dimensional

  • No. 370783 Precision sine vice PS-ZD, size 2, jaw width 120, precision vice PS-ZD 2-dimensional

  • No. 434833 RZP-A 80-1

  • No. 434837 RZP-A 80-1/GA

  • No. 434838 RZP-A 80-1/GI

  • No. 434839 RZP-A 100-1/GI

  • No. 434840 RZP-A 100-2/GA

  • No. 434841 RZP-A 125-1

  • No. 434842 RZP-A 125-1/GA

  • No. 434843 RZP-A 125-1/GI

  • No. 434844 RPP-A 80-1

  • No. 434845 RPP-A 100-1

  • No. 434846 RPP-A 100-2/GA

  • No. 434847 RPP-A 125-2/GA

  • No. 434848 RPP-A 160-1

  • No. 434891 RZP-A 100-1

  • No. 434892 RZP-A 100-2

  • No. 434900 RZP-A 100-1/GA

  • No. 434901 RZP-A 100-2/GI

  • No. 434902 RZP-A 125-2

  • No. 434914 RZP-A 125-2/GA

  • No. 434915 RZP-A 125-2/GI

  • No. 435027 RPP-A 80-2

  • No. 435028 RPP-A 80-1/GA

  • No. 435029 RPP-A 80-2/GA

  • No. 435030 RPP-A 80-1/GI

  • No. 435031 RPP-A 80-2/GI

  • No. 435032 RPP-A 100-2

  • No. 435033 RPP-A 100-1/GA

  • No. 435034 RPP-A 100-1/GI

  • No. 435035 RPP-A 100-2/GI

  • No. 435036 RPP-A 125-1

  • No. 435037 RPP-A 125-2

  • No. 435038 RPP-A 125-1/GA

  • No. 435039 RPP-A 125-1/GI

  • No. 435040 RPP-A 125-2/GI

  • No. 435041 RPP-A 160-2

  • No. 435042 RZP-A 80-2

  • No. 435043 RZP-A 80-2/GA

  • No. 435044 RZP-A 80-2/GI

  • No. 435045 RZP-A 160-1

  • No. 435046 RZP-A 160-2

  • No. 435055 RZP-A 160-1/GA

  • No. 435056 RZP-A 160-2/GA

  • No. 435057 RZP-A 160-1/GI

  • No. 435058 RZP-A 160-2/GI

  • No. 436525 RPP-A 160-1/GA

  • No. 436526 RPP-A 160-2/GA

  • No. 436527 RPP-A 160-1/GI

  • No. 436528 RPP-A 160-2/GI

  • No. 436763 RPP-A 64-1

  • No. 436764 RPP-A 64-2

  • No. 436765 RPP-A 64-1/GA

  • No. 436766 RPP-A 64-2/GA

  • No. 436767 RPP-A 64-1/GI

  • No. 436768 RPP-A 64-2/GI

  • No. 436958 RZP-A 64-1

  • No. 436959 RZP-A 64-2

  • No. 436960 RZP-A 64-1/GA

  • No. 436961 RZP-A 64-2/GA

  • No. 436962 RZP-A 64-1/GI

  • No. 436963 RZP-A 64-2/GI

  • No. 437475 Self-centering Key Bar Chuck DURO-T, size 125, 3-jaw, DIN 6350 flat back mount, with reversible one-piece jaws

  • No. 437476 Self-centering Key Bar Chuck DURO-T, size 160, 3-jaw, DIN 6350 flat back mount, with reversible one-piece jaws

  • No. 437477 Self-centering Key Bar Chuck DURO-T, size 200, 3-jaw, DIN 6350 flat back mount, with reversible one-piece jaws

  • No. 437478 Self-centering Key Bar Chuck DURO-T, size 250, 3-jaw, DIN 6350 flat back mount, with reversible one-piece jaws

  • No. 437479 Self-centering Key Bar Chuck DURO-T, size 315, 3-jaw, DIN 6350 flat back mount, with reversible one-piece jaws

  • No. 437480 Self-centering Key Bar Chuck DURO-T, size 400, 3-jaw, DIN 6350 flat back mount, with reversible one-piece jaws

  • No. 437481 Self-centering Key Bar Chuck DURO-T, size 500, 3-jaw, DIN 6350 flat back mount, with reversible one-piece jaws

  • No. 437490 Self-centering Key Bar Chuck DURO-T, size 160, 3-jaw, DIN 6350 flat back mount, with base jaws and reversible top jaws

  • No. 437491 Self-centering Key Bar Chuck DURO-T, size 200, 3-jaw, DIN 6350 flat back mount, with base jaws and reversible top jaws

  • No. 437492 Self-centering Key Bar Chuck DURO-T, size 250, 3-jaw, DIN 6350 flat back mount, with base jaws and reversible top jaws

  • No. 437493 Self-centering Key Bar Chuck DURO-T, size 315, 3-jaw, DIN 6350 flat back mount, with base jaws and reversible top jaws

  • No. 437494 Self-centering Key Bar Chuck DURO-T, size 400, 3-jaw, DIN 6350 flat back mount, with base jaws and reversible top jaws

  • No. 437495 Self-centering Key Bar Chuck DURO-T, size 500, 3-jaw, DIN 6350 flat back mount, with base jaws and reversible top jaws

  • No. 437496 Self-centering Key Bar Chuck DURO-T, size 630, 3-jaw, DIN 6350 flat back mount, with base jaws and reversible top jaws

  • No. 437499 Self-centering Key Bar Chuck DURO-T, size 125, DIN 55027 -5, with reversible one-piece jaws

  • No. 437501 Self-centering Key Bar Chuck DURO-T, size 160, DIN 55027 -5, with reversible one-piece jaws

  • No. 437502 Self-centering Key Bar Chuck DURO-T, size 160, DIN 55027 -6, with reversible one-piece jaws

  • No. 437504 Self-centering Key Bar Chuck DURO-T, size 200, DIN 55027 -5, with reversible one-piece jaws

  • No. 437505 Self-centering Key Bar Chuck DURO-T, size 200, DIN 55027 -6, with reversible one-piece jaws

  • No. 437509 Self-centering Key Bar Chuck DURO-T, size 250, DIN 55027 -6, with reversible one-piece jaws

  • No. 437510 Self-centering Key Bar Chuck DURO-T, size 250, DIN 55027 -8, with reversible one-piece jaws

  • No. 437512 Self-centering Key Bar Chuck DURO-T, size 315, DIN 55027 -8, with reversible one-piece jaws

  • No. 437513 Self-centering Key Bar Chuck DURO-T, size 315, DIN 55027 -11, with reversible one-piece jaws

  • No. 437515 Self-centering Key Bar Chuck DURO-T, size 400, DIN 55027 -8, with reversible one-piece jaws

  • No. 437516 Self-centering Key Bar Chuck DURO-T, size 400, DIN 55027 -11, with reversible one-piece jaws

  • No. 437519 Self-centering Key Bar Chuck DURO-T, size 500, DIN 55027 -11, with reversible one-piece jaws

  • No. 437520 Self-centering Key Bar Chuck DURO-T, size 500, DIN 55027 -15, with reversible one-piece jaws

  • No. 437548 Self-centering Key Bar Chuck DURO-T, size 160, DIN 55027 -5, with base jaws and reversible top jaws

  • No. 437549 Self-centering Key Bar Chuck DURO-T, size 160, DIN 55027 -6, with base jaws and reversible top jaws

  • No. 437551 Self-centering Key Bar Chuck DURO-T, size 200, DIN 55027 -5, with base jaws and reversible top jaws

  • No. 437552 Self-centering Key Bar Chuck DURO-T, size 200, DIN 55027 -6, with base jaws and reversible top jaws

  • No. 437556 Self-centering Key Bar Chuck DURO-T, size 250, DIN 55027 -6, with base jaws and reversible top jaws

  • No. 437557 Self-centering Key Bar Chuck DURO-T, size 250, DIN 55027 -8, with base jaws and reversible top jaws

  • No. 437559 Self-centering Key Bar Chuck DURO-T, size 315, DIN 55027 -8, with base jaws and reversible top jaws

  • No. 437560 Self-centering Key Bar Chuck DURO-T, size 315, DIN 55027 -11, with base jaws and reversible top jaws

  • No. 437562 Self-centering Key Bar Chuck DURO-T, size 400, DIN 55027 -8, with base jaws and reversible top jaws

  • No. 437563 Self-centering Key Bar Chuck DURO-T, size 400, DIN 55027 -11, with base jaws and reversible top jaws

  • No. 437566 Self-centering Key Bar Chuck DURO-T, size 500, DIN 55027 -11, with base jaws and reversible top jaws

  • No. 437567 Self-centering Key Bar Chuck DURO-T, size 500, DIN 55027 -15, with base jaws and reversible top jaws

  • No. 437568 Self-centering Key Bar Chuck DURO-T, size 630, DIN 55027 -11, with base jaws and reversible top jaws

  • No. 437569 Self-centering Key Bar Chuck DURO-T, size 630, DIN 55027 -15, with base jaws and reversible top jaws

  • No. 438040 RPP-A 50-1

  • No. 438041 RPP-A 50-2

  • No. 438042 RPP-A 50-1/GA

  • No. 438043 RPP-A 50-2/GA

  • No. 438044 RPP-A 50-1/GI

  • No. 438045 RPP-A 50-2/GI

  • No. 438355 C 15 3-jaw power-chucks DURO-NCSE, quick-acting jaw change system, with individual jaw unlocking, with straight teeth Cylindrical center mount DIN 6353 / short taper mount ISO 702-1 (DIN 55026/55021).

  • No. 438356 C 15 3-jaw power-chucks DURO-NCSE, quick-acting jaw change system, with individual jaw unlocking, with straight teeth Cylindrical center mount DIN 6353 / short taper mount ISO 702-1 (DIN 55026/55021).

  • No. 438357 C 15 3-jaw power-chucks DURO-NCSE, quick-acting jaw change system, with individual jaw unlocking, with straight teeth Cylindrical center mount DIN 6353 / short taper mount ISO 702-1 (DIN 55026/55021).

  • No. 438358 C 15 3-jaw power-chucks DURO-NCSE, quick-acting jaw change system, with individual jaw unlocking, with straight teeth Cylindrical center mount DIN 6353 / short taper mount ISO 702-1 (DIN 55026/55021).

  • No. 438359 C 15 3-jaw power-chucks DURO-NCSE, quick-acting jaw change system, with individual jaw unlocking, with straight teeth Cylindrical center mount DIN 6353 / short taper mount ISO 702-1 (DIN 55026/55021).

  • No. 438360 C 15 3-jaw power-chucks DURO-NCSE, quick-acting jaw change system, with individual jaw unlocking, with straight teeth Cylindrical center mount DIN 6353 / short taper mount ISO 702-1 (DIN 55026/55021).

  • No. 438361 C 15 3-jaw power-chucks DURO-NCSE, quick-acting jaw change system, with individual jaw unlocking, with straight teeth Cylindrical center mount DIN 6353 / short taper mount ISO 702-1 (DIN 55026/55021).

  • No. 438362 C 15 3-jaw power-chucks DURO-NCSE, quick-acting jaw change system, with individual jaw unlocking, with straight teeth Cylindrical center mount DIN 6353 / short taper mount ISO 702-1 (DIN 55026/55021).

  • No. 438363 C 15 3-jaw power-chucks DURO-NCSE, quick-acting jaw change system, with individual jaw unlocking, with straight teeth Cylindrical center mount DIN 6353 / short taper mount ISO 702-1 (DIN 55026/55021).

  • No. 438364 C 15 3-jaw power-chucks DURO-NCSE, quick-acting jaw change system, with individual jaw unlocking, with straight teeth Cylindrical center mount DIN 6353 / short taper mount ISO 702-1 (DIN 55026/55021).

  • No. 438365 C 15 3-jaw power-chucks DURO-NCSE, quick-acting jaw change system, with individual jaw unlocking, with straight teeth Cylindrical center mount DIN 6353 / short taper mount ISO 702-1 (DIN 55026/55021).

  • No. 438366 C 15 3-jaw power-chucks DURO-NCSE, quick-acting jaw change system, with individual jaw unlocking, with straight teeth Cylindrical center mount DIN 6353 / short taper mount ISO 702-1 (DIN 55026/55021).

  • No. 438367 C 15 3-jaw power-chucks DURO-NCSE, quick-acting jaw change system, with individual jaw unlocking, with straight teeth Cylindrical center mount DIN 6353 / short taper mount ISO 702-1 (DIN 55026/55021).

  • No. 438368 C 15 3-jaw power-chucks DURO-NCSE, quick-acting jaw change system, with individual jaw unlocking, with straight teeth Cylindrical center mount DIN 6353 / short taper mount ISO 702-1 (DIN 55026/55021).

  • No. 438369 C 15 3-jaw power-chucks DURO-NCSE, quick-acting jaw change system, with individual jaw unlocking, with straight teeth Cylindrical center mount DIN 6353 / short taper mount ISO 702-1 (DIN 55026/55021).

  • No. 438370 C 15 3-jaw power-chucks DURO-NCSE, quick-acting jaw change system, with individual jaw unlocking, with straight teeth Cylindrical center mount DIN 6353 / short taper mount ISO 702-1 (DIN 55026/55021).

  • No. 438371 C 15 3-jaw power-chucks DURO-NCSE, quick-acting jaw change system, with individual jaw unlocking, with straight teeth Cylindrical center mount DIN 6353 / short taper mount ISO 702-1 (DIN 55026/55021).

  • No. 438372 C 15 3-jaw power-chucks DURO-NCSE, quick-acting jaw change system, with individual jaw unlocking, with straight teeth Cylindrical center mount DIN 6353 / short taper mount ISO 702-1 (DIN 55026/55021).

  • No. 438373 C 15 3-jaw power-chucks DURO-NCSE, quick-acting jaw change system, with individual jaw unlocking, with straight teeth Cylindrical center mount DIN 6353 / short taper mount ISO 702-1 (DIN 55026/55021).

  • No. 438374 C 15 3-jaw power-chucks DURO-NCSE, quick-acting jaw change system, with individual jaw unlocking, with straight teeth Cylindrical center mount DIN 6353 / short taper mount ISO 702-1 (DIN 55026/55021).

  • No. 438375 C 15 3-jaw power-chucks DURO-NCSE, quick-acting jaw change system, with individual jaw unlocking, with straight teeth Cylindrical center mount DIN 6353 / short taper mount ISO 702-1 (DIN 55026/55021).

  • No. 438376 C 15 3-jaw power-chucks DURO-NCSE, quick-acting jaw change system, with individual jaw unlocking, with straight teeth Cylindrical center mount DIN 6353 / short taper mount ISO 702-1 (DIN 55026/55021).

  • No. 438377 C 15 3-jaw power-chucks DURO-NCSE, quick-acting jaw change system, with individual jaw unlocking, with straight teeth Cylindrical center mount DIN 6353 / short taper mount ISO 702-1 (DIN 55026/55021).

  • No. 438378 C 15 3-jaw power-chucks DURO-NCSE, quick-acting jaw change system, with individual jaw unlocking, with straight teeth Cylindrical center mount DIN 6353 / short taper mount ISO 702-1 (DIN 55026/55021).

  • No. 439605 Self-centering Key Bar Chuck DURO-TA-160 3-jaw

  • No. 439606 Self-centering Key Bar Chuck DURO-TA-160 3-jaw

  • No. 439607 Self-centering Key Bar Chuck DURO-TA-200 3-jaw

  • No. 439608 Self-centering Key Bar Chuck DURO-TA-200 3-jaw

  • No. 439609 Self-centering Key Bar Chuck DURO-TA-200 3-jaw

  • No. 439610 Self-centering Key Bar Chuck DURO-TA-250 3-jaw

  • No. 463548 C 21: Base jaws, 3-jaw-set, hardened straight toothing, incl. cylinder screws, DIN 912-12.9

  • No. 463549 C 21: Base jaws, 3-jaw-set, hardened straight toothing, incl. cylinder screws, DIN 912-12.9

  • No. 463550 C 21: Base jaws, 3-jaw-set, hardened straight toothing, incl. cylinder screws, DIN 912-12.9

  • No. 463551 C 21: Base jaws, 3-jaw-set, hardened straight toothing, incl. cylinder screws, DIN 912-12.9

  • No. 463552 C 21: Base jaws, 3-jaw-set, hardened straight toothing, incl. cylinder screws, DIN 912-12.9

  • No. 463553 C 21: Base jaws, 3-jaw-set, hardened straight toothing, incl. cylinder screws, DIN 912-12.9

  • No. 463554 C 21: Base jaws, 3-jaw-set, hardened straight toothing, incl. cylinder screws, DIN 912-12.9

  • No. 463555 C 21: One-piece reversible jaws, 3-jaw set, hardened straight toothing - material: 16 MnCr 5

  • No. 463556 C 21: One-piece reversible jaws, 3-jaw set, hardened straight toothing - material: 16 MnCr 5

  • No. 463557 C 21: One-piece reversible jaws, 3-jaw set, hardened straight toothing - material: 16 MnCr 5

  • No. 463558 C 21: One-piece reversible jaws, 3-jaw set, hardened straight toothing - material: 16 MnCr 5

  • No. 463559 C 21: One-piece reversible jaws, 3-jaw set, hardened straight toothing - material: 16 MnCr 5

  • No. 463560 C 21: One-piece reversible jaws, 3-jaw set, hardened straight toothing - material: 16 MnCr 5

  • No. 463562 C 21: Soft one-piece jaws, 3-jaw set, can be hardened straight toothing, guidance hardened and ground - material: 16 MnCr 5

  • No. 463563 C 21: Soft one-piece jaws, 3-jaw set, can be hardened straight toothing, guidance hardened and ground - material: 16 MnCr 5

  • No. 463564 C 21: Soft one-piece jaws, 3-jaw set, can be hardened straight toothing, guidance hardened and ground - material: 16 MnCr 5

  • No. 463565 C 21: Soft one-piece jaws, 3-jaw set, can be hardened straight toothing, guidance hardened and ground - material: 16 MnCr 5

  • No. 463566 C 21: Soft one-piece jaws, 3-jaw set, can be hardened straight toothing, guidance hardened and ground - material: 16 MnCr 5

  • No. 463567 C 21: Soft one-piece jaws, 3-jaw set, can be hardened straight toothing, guidance hardened and ground - material: 16 MnCr 5

  • No. 463568 C 21: Soft one-piece jaws, 3-jaw set, can be hardened straight toothing, guidance hardened and ground - material: 16 MnCr 5

  • No. 485522 C 21: Draw-down jaws, for interchangeable clamping inserts straight toothing, 1 piece, without clamping inserts.

  • No. 485523 C 21: Draw-down jaws, additional clamping range, for interchangeable clamping inserts straight toothing, 1 piece, without clamping inserts.

  • No. 485524 C 21: Draw-down jaws, for interchangeable clamping inserts straight toothing, 1 piece, without clamping inserts.

  • No. 485525 C 21: Draw-down jaws, additional clamping range, for interchangeable clamping inserts straight toothing, 1 piece, without clamping inserts.

  • No. 485526 C 21: Draw-down jaws, for interchangeable clamping inserts straight toothing, 1 piece, without clamping inserts.

  • No. 485527 C 21: Draw-down jaws, additional clamping range, for interchangeable clamping inserts straight toothing, 1 piece, without clamping inserts.

  • No. 485528 C 21: Draw-down jaws, for interchangeable clamping inserts straight toothing, 1 piece, without clamping inserts.

  • No. 485529 C 21: Draw-down jaws, additional clamping range, for interchangeable clamping inserts straight toothing, 1 piece, without clamping inserts.

  • No. 485530 C 21: Draw-down jaws, for interchangeable clamping inserts straight toothing, 1 piece, without clamping inserts.

  • No. 485531 C 21: Draw-down jaws, additional clamping range, for interchangeable clamping inserts straight toothing, 1 piece, without clamping inserts.

  • No. 485532 C 21: Draw-down jaws, for interchangeable clamping inserts straight toothing, 1 piece, without clamping inserts.

  • No. 485533 C 21: Draw-down jaws, additional clamping range, for interchangeable clamping inserts straight toothing, 1 piece, without clamping inserts.

  • No. 500511 S17 Drill Chuck Key

  • No. 500516 S9 Drill Chuck Key

  • No. 502763 Top Grip BZI Clamping Head Collet GTG42-Round, Smooth-D3/16", 47mm long.

  • No. 502764 Top Grip BZI Clamping Head Collet GTG42-Round, Smooth-D7/32", 47mm long.

  • No. 502765 Top Grip BZI Clamping Head Collet GTG42-Round, Smooth-D1/4", 47mm long.

  • No. 502766 Top Grip BZI Clamping Head Collet GTG42-Round, Smooth-D5/16", 47mm long.

  • No. 502767 Top Grip BZI Clamping Head Collet GTG42-Round, Smooth-D3/8", 47mm long.

  • No. 502768 Top Grip BZI Clamping Head Collet GTG42-Round, Smooth-D7/16", 47mm long.

  • No. 502769 Top Grip BZI Clamping Head Collet GTG42-Round, Smooth-D1/2", 47mm long.

  • No. 502770 Top Grip BZI Clamping Head Collet GTG42-Round, Smooth-D9/16", 47mm long.

  • No. 502771 Top Grip BZI Clamping Head Collet GTG42-Round, Smooth-D5/8", 47mm long.

  • No. 502772 Top Grip BZI Clamping Head Collet GTG42-Round, Smooth-D11/16", 47mm long.

  • No. 502773 Top Grip BZI Clamping Head Collet GTG42-Round, Smooth-D3/4", 47mm long.

  • No. 502774 Top Grip BZI Clamping Head Collet GTG42-Round, Smooth-D13/16", 47mm long.

  • No. 502775 Top Grip BZI Clamping Head Collet GTG42-Round, Smooth-D7/8", 47mm long.

  • No. 502776 Top Grip BZI Clamping Head Collet GTG42-Round, Smooth-D15/16", 47mm long.

  • No. 502777 Top Grip BZI Clamping Head Collet GTG42-Round, Smooth-D1-0", 47mm long.

  • No. 502778 Top Grip BZI Clamping Head Collet GTG42-Round, Smooth-D1-1/16", 47mm long.

  • No. 502779 Top Grip BZI Clamping Head Collet GTG42-Round, Smooth-D1-1/8", 47mm long.

  • No. 502780 Top Grip BZI Clamping Head Collet GTG42-Round, Smooth-D1-3/16", 47mm long.

  • No. 502781 Top Grip BZI Clamping Head Collet GTG42-Round, Smooth-D1-1/4", 47mm long.

  • No. 502782 Top Grip BZI Clamping Head Collet GTG42-Round, Smooth-D1-5/16", 47mm long.

  • No. 502783 Top Grip BZI Clamping Head Collet GTG42-Round, Smooth-D1-3/8", 47mm long.

  • No. 502784 Top Grip BZI Clamping Head Collet GTG42-Round, Smooth-D1-7/16", 47mm long.

  • No. 502785 Top Grip BZI Clamping Head Collet GTG42-Round, Smooth-D1-1/2", 47mm long.

  • No. 502786 Top Grip BZI Clamping Head Collet GTG42-Round, Smooth-D1-9/16", 47mm long.

  • No. 502787 Top Grip BZI Clamping Head Collet GTG42-Round, Smooth-D1-5/8", 47mm long.

  • No. 502788 Top Grip BZI Clamping Head Collet GT42-Round, Serrated-D3/8", 47mm long.

  • No. 502789 Top Grip BZI Clamping Head Collet GT42-Round, Serrated-D7/16", 47mm long.

  • No. 502790 Top Grip BZI Clamping Head Collet GT42-Round, Serrated-D1/2", 47mm long.

  • No. 502791 Top Grip BZI Clamping Head Collet GT42-Round, Serrated-D9/16", 47mm long.

  • No. 502792 Top Grip BZI Clamping Head Collet GT42-Round, Serrated-D5/8", 47mm long.

  • No. 502793 Top Grip BZI Clamping Head Collet GT42-Round, Serrated-D11/16", 47mm long.

  • No. 502794 Top Grip BZI Clamping Head Collet GT42-Round, Serrated-D3/4", 47mm long.

  • No. 502795 Top Grip BZI Clamping Head Collet GT42-Round, Serrated-D13/16", 47mm long.

  • No. 502796 Top Grip BZI Clamping Head Collet GT42-Round, Serrated-D7/8", 47mm long.

  • No. 502797 Top Grip BZI Clamping Head Collet GT42-Round, Serrated-D15/16", 47mm long.

  • No. 502798 Top Grip BZI Clamping Head Collet GT42-Round, Serrated-D1-0", 47mm long.

  • No. 502799 Top Grip BZI Clamping Head Collet GT42-Round, Serrated-D1-1/16", 47mm long.

  • No. 502800 Top Grip BZI Clamping Head Collet GT42-Round, Serrated-D1-1/8", 47mm long.

  • No. 502801 Top Grip BZI Clamping Head Collet GT42-Round, Serrated-D1-3/16", 47mm long.

  • No. 502802 Top Grip BZI Clamping Head Collet GT42-Round, Serrated-D1-1/4", 47mm long.

  • No. 502803 Top Grip BZI Clamping Head Collet GT42-Round, Serrated-D1-5/16", 47mm long.

  • No. 502804 Top Grip BZI Clamping Head Collet GT42-Round, Serrated-D1-3/8", 47mm long.

  • No. 502805 Top Grip BZI Clamping Head Collet GT42-Round, Serrated-D1-7/16", 47mm long.

  • No. 502806 Top Grip BZI Clamping Head Collet GT42-Round, Serrated-D1-1/2", 47mm long.

  • No. 502807 Top Grip BZI Clamping Head Collet GT42-Round, Serrated-D1-9/16", 47mm long.

  • No. 502808 Top Grip BZI Clamping Head Collet GT42-Round, Serrated-D1-5/8", 47mm long.

  • No. 502811 Top Grip BZI Clamping Head Collet GTG65-Round, Smooth-D1/4", 58mm long.

  • No. 502812 Top Grip BZI Clamping Head Collet GTG65-Round, Smooth-D5/16", 58mm long.

  • No. 502813 Top Grip BZI Clamping Head Collet GTG65-Round, Smooth-D3/8", 58mm long.

  • No. 502814 Top Grip BZI Clamping Head Collet GTG65-Round, Smooth-D7/16", 58mm long.

  • No. 502815 Top Grip BZI Clamping Head Collet GTG65-Round, Smooth-D1/2", 58mm long.

  • No. 502816 Top Grip BZI Clamping Head Collet GTG65-Round, Smooth-D9/16", 58mm long.

  • No. 502817 Top Grip BZI Clamping Head Collet GTG65-Round, Smooth-D5/8", 58mm long.

  • No. 502818 Top Grip BZI Clamping Head Collet GTG65-Round, Smooth-D11/16", 58mm long.

  • No. 502819 Top Grip BZI Clamping Head Collet GTG65-Round, Smooth-D3/4", 58mm long.

  • No. 502820 Top Grip BZI Clamping Head Collet GTG65-Round, Smooth-D13/16", 58mm long.

  • No. 502821 Top Grip BZI Clamping Head Collet GTG65-Round, Smooth-D7/8", 58mm long.

  • No. 502822 Top Grip BZI Clamping Head Collet GTG65-Round, Smooth-D15/16", 58mm long.

  • No. 502823 Top Grip BZI Clamping Head Collet GTG65-Round, Smooth-D1-0", 58mm long.

  • No. 502824 Top Grip BZI Clamping Head Collet GTG65-Round, Smooth-D1-1/16", 58mm long.

  • No. 502825 Top Grip BZI Clamping Head Collet GTG65-Round, Smooth-D1-1/8", 58mm long.

  • No. 502826 Top Grip BZI Clamping Head Collet GTG65-Round, Smooth-D1-3/16", 58mm long.

  • No. 502827 Top Grip BZI Clamping Head Collet GTG65-Round, Smooth-D1-1/4", 58mm long.

  • No. 502828 Top Grip BZI Clamping Head Collet GTG65-Round, Smooth-D1-5/16", 58mm long.

  • No. 502829 Top Grip BZI Clamping Head Collet GTG65-Round, Smooth-D1-3/8", 58mm long.

  • No. 502830 Top Grip BZI Clamping Head Collet GTG65-Round, Smooth-D1-7/16", 58mm long.

  • No. 502831 Top Grip BZI Clamping Head Collet GTG65-Round, Smooth-D1-1/2", 58mm long.

  • No. 502832 Top Grip BZI Clamping Head Collet GTG65-Round, Smooth-D1-9/16", 58mm long.

  • No. 502833 Top Grip BZI Clamping Head Collet GTG65-Round, Smooth-D1-5/8", 58mm long.

  • No. 502834 Top Grip BZI Clamping Head Collet GTG65-Round, Smooth-D1-11/16", 58mm long.

  • No. 502835 Top Grip BZI Clamping Head Collet GTG65-Round, Smooth-D1-3/4", 58mm long.

  • No. 502836 Top Grip BZI Clamping Head Collet GTG65-Round, Smooth-D1-13/16", 58mm long.

  • No. 502837 Top Grip BZI Clamping Head Collet GTG65-Round, Smooth-D1-7/8", 58mm long.

  • No. 502838 Top Grip BZI Clamping Head Collet GTG65-Round, Smooth-D1-15/16", 58mm long.

  • No. 502839 Top Grip BZI Clamping Head Collet GTG65-Round, Smooth-D2-0", 58mm long.

  • No. 502840 Top Grip BZI Clamping Head Collet GTG65-Round, Smooth-D2-1/16", 58mm long.

  • No. 502841 Top Grip BZI Clamping Head Collet GTG65-Round, Smooth-D2-1/8", 58mm long.

  • No. 502842 Top Grip BZI Clamping Head Collet GTG65-Round, Smooth-D2-3/16", 58mm long.

  • No. 502843 Top Grip BZI Clamping Head Collet GTG65-Round, Smooth-D2-1/4", 58mm long.

  • No. 502844 Top Grip BZI Clamping Head Collet GTG65-Round, Smooth-D2-5/16", 58mm long.

  • No. 502845 Top Grip BZI Clamping Head Collet GTG65-Round, Smooth-D2-3/8", 58mm long.

  • No. 502846 Top Grip BZI Clamping Head Collet GTG65-Round, Smooth-D2-7/16", 58mm long.

  • No. 502847 Top Grip BZI Clamping Head Collet GTG65-Round, Smooth-D2-1/2", 58mm long.

  • No. 502848 Top Grip BZI Clamping Head Collet GTG65-Round, Smooth-D2-9/16", 58mm long.

  • No. 502849 Top Grip BZI Clamping Head Collet GT65-Round, Serrated-D7/16", 58mm long.

  • No. 502850 Top Grip BZI Clamping Head Collet GT65-Round, Serrated-D1/2", 58mm long.

  • No. 502851 Top Grip BZI Clamping Head Collet GT65-Round, Serrated-D9/16", 58mm long.

  • No. 502852 Top Grip BZI Clamping Head Collet GT65-Round, Serrated-D5/8", 58mm long.

  • No. 502853 Top Grip BZI Clamping Head Collet GT65-Round, Serrated-D11/16", 58mm long.

  • No. 502854 Top Grip BZI Clamping Head Collet GT65-Round, Serrated-D3/4", 58mm long.

  • No. 502855 Top Grip BZI Clamping Head Collet GT65-Round, Serrated-D13/16", 58mm long.

  • No. 502856 Top Grip BZI Clamping Head Collet GT65-Round, Serrated-D7/8", 58mm long.

  • No. 502857 Top Grip BZI Clamping Head Collet GT65-Round, Serrated-D15/16", 58mm long.

  • No. 502858 Top Grip BZI Clamping Head Collet GT65-Round, Serrated-D1-0", 58mm long.

  • No. 502859 Top Grip BZI Clamping Head Collet GT65-Round, Serrated-D1-1/16", 58mm long.

  • No. 502860 Top Grip BZI Clamping Head Collet GT65-Round, Serrated-D1-1/8", 58mm long.

  • No. 502861 Top Grip BZI Clamping Head Collet GT65-Round, Serrated-D1-3/16", 58mm long.

  • No. 502862 Top Grip BZI Clamping Head Collet GT65-Round, Serrated-D1-1/4", 58mm long.

  • No. 502863 Top Grip BZI Clamping Head Collet GT65-Round, Serrated-D1-5/16", 58mm long.

  • No. 502864 Top Grip BZI Clamping Head Collet GT65-Round, Serrated-D1-3/8", 58mm long.

  • No. 502865 Top Grip BZI Clamping Head Collet GT65-Round, Serrated-D1-7/16", 58mm long.

  • No. 502866 Top Grip BZI Clamping Head Collet GT65-Round, Serrated-D1-1/2", 58mm long.

  • No. 502867 Top Grip BZI Clamping Head Collet GT65-Round, Serrated-D1-9/16", 58mm long.

  • No. 502868 Top Grip BZI Clamping Head Collet GT65-Round, Serrated-D1-5/8", 58mm long.

  • No. 502869 Top Grip BZI Clamping Head Collet GT65-Round, Serrated-D1-11/16", 58mm long.

  • No. 502870 Top Grip BZI Clamping Head Collet GT65-Round, Serrated-D1-3/4", 58mm long.

  • No. 502871 Top Grip BZI Clamping Head Collet GT65-Round, Serrated-D1-13/16", 58mm long.

  • No. 502872 Top Grip BZI Clamping Head Collet GT65-Round, Serrated-D1-7/8", 58mm long.

  • No. 502873 Top Grip BZI Clamping Head Collet GT65-Round, Serrated-D1-15/16", 58mm long.

  • No. 502874 Top Grip BZI Clamping Head Collet GT65-Round, Serrated-D2-0", 58mm long.

  • No. 502875 Top Grip BZI Clamping Head Collet GT65-Round, Serrated-D2-1/16", 58mm long.

  • No. 502876 Top Grip BZI Clamping Head Collet GT65-Round, Serrated-D2-1/8", 58mm long.

  • No. 502877 Top Grip BZI Clamping Head Collet GT65-Round, Serrated-D2-3/16", 58mm long.

  • No. 502878 Top Grip BZI Clamping Head Collet GT65-Round, Serrated-D2-1/4", 58mm long.

  • No. 502879 Top Grip BZI Clamping Head Collet GT65-Round, Serrated-D2-5/16", 58mm long.

  • No. 502880 Top Grip BZI Clamping Head Collet GT65-Round, Serrated-D2-3/8", 58mm long.

  • No. 502881 Top Grip BZI Clamping Head Collet GT65-Round, Serrated-D2-7/16", 58mm long.

  • No. 502882 Top Grip BZI Clamping Head Collet GT65-Round, Serrated-D2-1/2", 58mm long.

  • No. 502883 Top Grip BZI Clamping Head Collet GT65-Round, Serrated-D2-9/16", 58mm long.

  • No. 502884 Manual Top Grip BZI Clamping Head Collet Changing Tool CPT42

  • No. 502885 Manual Top Grip BZI Clamping Head Collet Changing Tool CPT65

  • No. 503050 GTG32 Round, Smooth BZI Clamping Head, Dia 3/16" x 44mm

  • No. 503051 GTG32 Round, Smooth BZI Clamping Head, Dia 1/4" x 44mm

  • No. 503052 GTG32 Round, Smooth BZI Clamping Head, Dia 5/16" x 44mm

  • No. 503053 GTG32 Round, Smooth BZI Clamping Head, Dia 3/8" x 44mm

  • No. 503054 GTG32 Round, Smooth BZI Clamping Head, Dia 7/16" x 44mm

  • No. 503055 GTG32 Round, Smooth BZI Clamping Head, Dia 1/2" x 44mm

  • No. 503056 GTG32 Round, Smooth BZI Clamping Head, Dia 9/16" x 44mm

  • No. 503057 GTG32 Round, Smooth BZI Clamping Head, Dia 5/8" x 44mm

  • No. 503058 GTG32 Round, Smooth BZI Clamping Head, Dia 11/16" x 44mm

  • No. 503059 GTG32 Round, Smooth BZI Clamping Head, Dia 3/4" x 44mm

  • No. 503060 GTG32 Round, Smooth BZI Clamping Head, Dia 13/16" x 44mm

  • No. 503061 GTG32 Round, Smooth BZI Clamping Head, Dia 7/8" x 44mm

  • No. 503062 GTG32 Round, Smooth BZI Clamping Head, Dia 15/16" x 44mm

  • No. 503063 GTG32 Round, Smooth BZI Clamping Head, Dia 1-0" x 44mm

  • No. 503064 GTG32 Round, Smooth BZI Clamping Head, Dia 1-1/16" x 44mm

  • No. 503065 GTG32 Round, Smooth BZI Clamping Head, Dia 1-1/8" x 44mm

  • No. 503066 GTG32 Round, Smooth BZI Clamping Head, Dia 1-3/16" x 44mm

  • No. 503067 GTG32 Round, Smooth BZI Clamping Head, Dia 1-1/4" x 44mm

  • No. 503068 GT32 Round, Serrated BZI Clamping Head, Dia 3/8" x 44mm

  • No. 503069 GT32 Round, Serrated BZI Clamping Head, Dia 7/16" x 44mm

  • No. 503070 GT32 Round, Serrated BZI Clamping Head, Dia 1/2" x 44mm

  • No. 503071 GT32 Round, Serrated BZI Clamping Head, Dia 9/16" x 44mm

  • No. 503072 GT32 Round, Serrated BZI Clamping Head, Dia 5/8" x 44mm

  • No. 503073 GT32 Round, Serrated BZI Clamping Head, Dia 11/16" x 44mm

  • No. 503074 GT32 Round, Serrated BZI Clamping Head, Dia 3/4" x 44mm

  • No. 503075 GT32 Round, Serrated BZI Clamping Head, Dia 13/16" x 44mm

  • No. 503076 GT32 Round, Serrated BZI Clamping Head, Dia 7/8" x 44mm

  • No. 503077 GT32 Round, Serrated BZI Clamping Head, Dia 15/16" x 44mm

  • No. 503078 GT32 Round, Serrated BZI Clamping Head, Dia 1-0" x 44mm

  • No. 503079 GT32 Round, Serrated BZI Clamping Head, Dia 1-1/16" x 44mm

  • No. 503080 GT32 Round, Serrated BZI Clamping Head, Dia 1-1/8" x 44mm

  • No. 503081 GT32 Round, Serrated BZI Clamping Head, Dia 1-3/16" x 44mm

  • No. 503082 GT32 Round, Serrated BZI Clamping Head, Dia 1-1/4" x 44mm

  • No. 503277 Taper Arbor R8-JT2

  • No. 503278 Taper Arbor R8-JT3

  • No. 503279 Taper Arbor, R8, JT4

  • No. 503280 Taper Arbor R8-JT33

  • No. 503281 Taper Arbor MT5-JT5

  • No. 503292 Taper Arbor R8-JT6

  • No. 503378 Taper Arbor MT3-JT4

  • No. 503379 Taper Arbor MT4-JT4

  • No. 503380 Taper Arbor MT5-JT6

  • No. 503381 Taper Arbor MT5-JT3

  • No. 503382 Taper Arbor MT5-JT4

  • No. 600581 Key-type drill chuck HBF, Size 13, Mount SDSØ10, Clamping capacity 2.5-13, hammer drill chuck with SDS-Plus adaptor take up

  • No. 600638 Steel body Independent chuck USU, size 800, steel body with base jaws and reversible top jaws, DIN 55027 -8 spindle mount with studs and lock-nuts.

  • No. 600639 Steel body Independent chuck USU, size 900, steel body with base jaws and reversible top jaws, DIN 55027 -11 spindle mount with studs and lock-nuts.

  • No. 600641 Steel body Independent chuck USU, size 900, steel body with base jaws and reversible top jaws, DIN 55027 -15 spindle mount with studs and lock-nuts.

  • No. 600642 Steel body Independent chuck USU, size 1100, steel body with base jaws and reversible top jaws, DIN 55027 -15 spindle mount with studs and lock-nuts.

  • No. 600643 Steel body Independent chuck USU, size 1200, steel body with base jaws and reversible top jaws, DIN 55027 -15 spindle mount with studs and lock-nuts.

  • No. 600645 Steel body Independent chuck USU, size 1000, DIN 55027 -20, with base jaws and reversible top jaws, steel body

  • No. 600646 Steel body Independent chuck USU, size 1100, DIN 55027 -20, with base jaws and reversible top jaws, steel body

  • No. 600647 Steel body Independent chuck USU, size 1200, DIN 55027 -20, with base jaws and reversible top jaws, steel body

  • No. 600660 Steel body Independent chuck USU, size 900, steel body with base jaws and reversible top jaws, DIN 55029 D1-11 Camlock spindle mount.

  • No. 600661 Steel body Independent chuck USU, size 900, steel body with base jaws and reversible top jaws, DIN 55029 D1-15 Camlock spindle mount.

  • No. 600662 Steel body Independent chuck USU, size 1100, steel body with base jaws and reversible top jaws, DIN 55029 D1-15 Camlock spindle mount.

  • No. 600663 Steel body Independent chuck USU, size 1200, steel body with base jaws and reversible top jaws, DIN 55029 D1-15 Camlock spindle mount.

  • No. 600665 Steel body Independent chuck USU, size 1000, steel body with base jaws and reversible top jaws, DIN 55029 D1-20 Camlock spindle mount.

  • No. 600666 Steel body Independent chuck USU, size 1100, steel body with base jaws and reversible top jaws, DIN 55029 D1-20 Camlock spindle mount.

  • No. 600667 Steel body Independent chuck USU, size 1200, steel body with base jaws and reversible top jaws, DIN 55029 D1-20 Camlock spindle mount.

  • No. 664467 Keyless drill chuck Extra-RV, Size 10, Mount 3/8"-24, Clamping capacity 1-10 with radial locking plastic design, with retaining ring, through-hole

  • No. 666537 Universal Key-Type Drill Chuck, Flutted Sleeve, Clamping Capacity 1/64-1/4", Mount J1, S8 Key

  • No. 666563 Universal Key-Type Drill Chuck, Flutted Sleeve, Clamping Capacity 1/64-1/4", Mount 3/8"-24, S8 Key

  • No. 666565 Universal Key-Type Drill Chuck, Flutted Sleeve, Clamping Capacity 1/32-3/8", Mount 3/8"-24, S8 Key

  • No. 666566 Universal Key-Type Drill Chuck, Flutted Sleeve, Clamping Capacity 1/32-3/8", Mount 1/2"-20, S8 Key

  • No. 666567 Universal Key-Type Drill Chuck, Flutted Sleeve, Clamping Capacity 1/32-3/8", Mount J2, S9 Key

  • No. 666571 Universal Key-Type Drill Chuck, Flutted Sleeve, Clamping Capacity 1/16-1/2", Mount J2, S9 Key

  • No. 666572 Universal Key-Type Drill Chuck, Flutted Sleeve, Clamping Capacity 1/16-1/2", Mount J33, S9 Key

  • No. 666573 Universal Key-Type Drill Chuck, Flutted Sleeve, Clamping Capacity 1/16-1/2", Mount J6, S9 Key

  • No. 666574 Universal Key-Type Drill Chuck, Flutted Sleeve, Clamping Capacity 1/16-1/2", Mount 3/8"-24, S9 Key

  • No. 666575 Universal Key-Type Drill Chuck, Flutted Sleeve, Clamping Capacity 1/16-1/2", Mount 1/2"-20, S9 Key

  • No. 666579 Universal Key-Type Drill Chuck, Flutted Sleeve, Clamping Capacity 1/8-5/8", Mount J3, S10 Key

  • No. 725581 C 15: Changeable workpiece rests (in different lengths).

  • No. 767573 Keyless drill chuck Extra-RV, Size 10, Mount 3/8"-24, Clamping capacity 1-10 with radial locking plastic design, through-hole

  • No. 767580 Keyless drill chuck Extra-RV, Size 13, Mount 1/2"-20, Clamping capacity 1.5-13 with radial locking plastic design, through-hole

  • No. 767639 Keyless drill chuck Extra-RV, Size 10, Mount 1/2"-20, Clamping capacity 1-10 with radial locking plastic design, with retaining ring, through-hole

  • No. 767641 Keyless drill chuck Extra-RV, Size 13, Mount 3/8"-24, Clamping capacity 1.5-13 with radial locking plastic design, through-hole

  • No. 767651 Keyless drill chuck Extra-RV, Size 10, Mount 1/2"-20, Clamping capacity 1-10 with radial locking plastic design, through-hole

  • No. 767657 Keyless drill chuck Extra-RV, Size 13, Mount 3/8"-24, Clamping capacity 1.5-13 with radial locking plastic design, with retaining ring, through-hole

  • No. 767692 Keyless drill chuck Extra-RV, Size 13, Mount 1/2"-20, Clamping capacity 1.5-13 with radial locking plastic design, with retaining ring, through-hole

  • No. 772389 Revolving tailstock center - Tip angle 60°, Mount MT 2, Size 752, extended NC-centre with carbide insert, powerful, for small and medium components

  • No. 772390 Revolving tailstock center - Tip angle 60°, Mount MT 3, Size 753, extended NC-centre with carbide insert, powerful, for small and medium components

  • No. 772391 Revolving tailstock center - Tip angle 60°, Mount MT 4, Size 754, extended NC-centre with carbide insert, powerful, for small and medium components

  • No. 772392 Revolving tailstock center - Tip angle 60°, Mount MT 5, Size 755, extended NC-centre with carbide insert, powerful, for small and medium components

  • No. 802490 Keyless drill chuck Extra-RV, Size 13, Mount 1/2"-20, Clamping capacity 1.5-13 with radial locking metal design, with retaining ring, through-hole

  • No. 863421 Drilling machine vice DPV, size 1, jaw width 80, with V-jaw and normal jaw SBO

  • No. 863422 Drilling machine vice DPV, size 2, jaw width 100, with V-jaw and normal jaw SBO

  • No. 863423 Drilling machine vice DPV, size 3, jaw width 120, with V-jaw and normal jaw SBO

  • No. 871000 Spiro 4 High Precision Keyless Drill Chuck, Clamping Capacity 0-4mm, Mount B10

  • No. 871002 Spiro 4 High Precision Keyless Drill Chuck, Clamping Capacity 0-4mm, Mount J1

  • No. 871003 Quick-action drill chuck Spiro (high precision design), Size 6, Mount B 10, Clamping capacity 0-6.5, run-out accuary 0,05 mm

  • No. 871004 Quick-action drill chuck Spiro (high precision design), Size 6, Mount B 12, Clamping capacity 0-6.5, run-out accuary 0,05 mm

  • No. 871005 Spiro 6 High Precision Keyless Drill Chuck, Clamping Capacity 0-6.5mm, Mount J1

  • No. 871008 Quick-action drill chuck Spiro (high precision design), Size 10, Mount B 12, Clamping capacity 0-10, run-out accuary 0,05 mm

  • No. 871009 Quick-action drill chuck Spiro (high precision design), Size 10, Mount B 16, Clamping capacity 0-10, run-out accuary 0,05 mm

  • No. 871010 Spiro 10 High Precision Keyless Drill Chuck, Clamping Capacity 0-10mm, Mount J2

  • No. 871011 Spiro 10 High Precision Keyless Drill Chuck, Clamping Capacity 0-10mm, Mount J33

  • No. 871012 Quick-action drill chuck Spiro (high precision design), Size 13, Mount B 16, Clamping capacity 1-13, run-out accuary 0,05 mm

  • No. 871013 Spiro 13 High Precision Keyless Drill Chuck, Clamping Capacity 1-13mm, Mount J2

  • No. 871014 Spiro 13 High Precision Keyless Drill Chuck, Clamping Capacity 1-13mm, Mount J33

  • No. 871015 Quick-action drill chuck Spiro (high precision design), Size 13, Mount J 6, Clamping capacity 1-13, run-out accuary 0,05 mm

  • No. 871016 Quick-action drill chuck Spiro (high precision design), Size 16, Mount B 16, Clamping capacity 3-16, run-out accuary 0,05 mm

  • No. 871017 Quick-action drill chuck Spiro (high precision design), Size 16, Mount B 18, Clamping capacity 3-16, run-out accuary 0,05 mm

  • No. 871018 Quick-action drill chuck Spiro (high precision design), Size 16, Mount J 6, Clamping capacity 3-16, run-out accuary 0,05 mm

  • No. 871019 Keyless drill chuck Supra, Size 4, Mount B10, Clamping capacity 0-4 heavy industrial version

  • No. 871020 Keyless drill chuck Supra, Size 4, Mount J0, Clamping capacity 0-4 heavy industrial version

  • No. 871022 Quick-action drill chuck Supra, Size 6, Mount B10, Clamping capacity 0-6.5 heavy industrial version

  • No. 871023 Quick-action drill chuck Supra, Size 6, Mount B12, Clamping capacity 0-6.5 heavy industrial version

  • No. 871024 Quick-action drill chuck Supra, Size 6, Mount J1, Clamping capacity 0-6.5 heavy industrial version

  • No. 871025 Quick-action drill chuck Supra, Size 6, Mount 3/8"-24, Clamping capacity 0-6.5 heavy industrial version

  • No. 871029 Supra 8S Keyless Drill Chuck, Clamping Capacity 0-8mm, Mount 3/8"-24

  • No. 871031 Quick-action drill chuck Supra, Size 8, Mount B10, Clamping capacity 0-8 heavy industrial version

  • No. 871032 Quick-action drill chuck Supra, Size 8, Mount B12, Clamping capacity 0-8 heavy industrial version

  • No. 871033 Quick-action drill chuck Supra, Size 8, Mount J1, Clamping capacity 0-8 heavy industrial version

  • No. 871034 Quick-action drill chuck Supra, Size 8, Mount 3/8"-24, Clamping capacity 0-8 heavy industrial version

  • No. 871038 Quick-action drill chuck Supra S, Size 10S, Mount 3/8"-24, Clamping capacity 0.5-10 light version

  • No. 871039 Quick-action drill chuck Supra S, Size 10S, Mount 1/2"-20, Clamping capacity 0.5-10 light version

  • No. 871040 Quick-action drill chuck Supra, Size 10, Mount B12, Clamping capacity 0-10 heavy industrial version

  • No. 871041 Quick-action drill chuck Supra, Size 10, Mount B16, Clamping capacity 0-10 heavy industrial version

  • No. 871042 Quick-action drill chuck Supra, Size 10, Mount J2, Clamping capacity 0-10 heavy industrial version

  • No. 871043 Quick-action drill chuck Supra, Size 10, Mount J33, Clamping capacity 0-10 heavy industrial version

  • No. 871044 Quick-action drill chuck Supra, Size 10, Mount 3/8"-24, Clamping capacity 0-10 heavy industrial version

  • No. 871045 Quick-action drill chuck Supra, Size 10, Mount 1/2"-20, Clamping capacity 0-10 heavy industrial version

  • No. 871046 Quick-action drill chuck Supra S, Size 13S, Mount B12, Clamping capacity 1-13 light version

  • No. 871047 Quick-action drill chuck Supra S, Size 13S, Mount B16, Clamping capacity 1-13 light version

  • No. 871049 Quick-action drill chuck Supra S, Size 13S, Mount 3/8"-24, Clamping capacity 1-13 light version

  • No. 871050 Quick-action drill chuck Supra S, Size 13S, Mount 1/2"-20, Clamping capacity 1-13 light version

  • No. 871051 Quick-action drill chuck Supra, Size 13, Mount B16, Clamping capacity 1-13 heavy industrial version

  • No. 871052 Quick-action drill chuck Supra, Size 13, Mount J2, Clamping capacity 1-13 heavy industrial version

  • No. 871053 Quick-action drill chuck Supra, Size 13, Mount J33, Clamping capacity 1-13 heavy industrial version

  • No. 871054 Quick-action drill chuck Supra, Size 13, Mount J6, Clamping capacity 1-13 heavy industrial version

  • No. 871055 Quick-action drill chuck Supra, Size 13, Mount 1/2"-20, Clamping capacity 1-13 heavy industrial version

  • No. 871057 Quick-action drill chuck Supra S, Size 16S, Mount B16, Clamping capacity 3-16 light version

  • No. 871058 Quick-action drill chuck Supra S, Size 16S, Mount B18, Clamping capacity 3-16 light version

  • No. 871060 Supra 16S Keyless Drill Chuck, Clamping Capacity 3-16mm, Mount J33

  • No. 871062 Quick-action drill chuck Supra S, Size 16S, Mount 1/2"-20, Clamping capacity 3-16 light version

  • No. 871063 Quick-action drill chuck Supra S, Size 16S, Mount 5/8"-16, Clamping capacity 3-16 light version

  • No. 871064 Quick-action drill chuck Supra, Size 16, Mount B16, Clamping capacity 3-16 heavy industrial version

  • No. 871065 Quick-action drill chuck Supra, Size 16, Mount B18, Clamping capacity 3-16 heavy industrial version

  • No. 871066 Quick-action drill chuck Supra, Size 16, Mount J6, Clamping capacity 3-16 heavy industrial version

  • No. 871067 Supra 16 Keyless Drill Chuck, Clamping Capacity 3-16mm, Mount 5/8"-16

  • No. 893350 Keyless drill chuck Extra-RV, Size 10, Mount 1/2"-20, Clamping capacity 1-10 with radial locking metal design, through-hole

  • No. 893351 Keyless drill chuck Extra-RV, Size 10, Mount 3/8"-24, Clamping capacity 1-10 with radial locking metal design, through-hole

  • No. 893352 Keyless drill chuck Extra-RV, Size 13, Mount 1/2"-20, Clamping capacity 1.5-13 with radial locking metal design, through-hole

  • No. 1028192 C 15: T-nuts with screw, for SV 1,5"x60°.

  • No. 1028193 C 15: T-nuts with screw, for SV 1,5"x60°.

  • No. 1028194 C 15: T-nuts with screw, for SV 1,5"x60°.

  • No. 1028196 C 15: T-nuts with screw, for SV 1,5"x60°.

  • No. 1033051 Keyless drill chuck Extra-RV, Size 13, Mount 3/8"-24, Clamping capacity 1.5-13 with radial locking metal design, with retaining ring, through-hole

  • No. 1033053 Keyless drill chuck Extra-RV, Size 10, Mount 1/2"-20, Clamping capacity 1-10 with radial locking metal design, with retaining ring, through-hole

  • No. 1076883 Supra-SK13E Keyless Drill Chuck, Clamping Capacity 1.5-13mm, Mount 1/2-20

  • No. 1100940 Keyless drill chuck Extra-RV, Size 10, Hex shank, Clamping capacity 1-10 with radial locking light design, with retaining ring

  • No. 1111182 Precision vice PL-G, size 0, jaw width 60, precision vice

  • No. 1111183 Precision vice PL-G, size 1, jaw width 73, precision vice

  • No. 1111184 Precision vice PL-G, size 2, jaw width 88, precision vice

  • No. 1111185 Precision vice PLF, size 0, jaw width 50, with quick adjustment in accuracy to gauge

  • No. 1111186 Precision vice PLF, size 1, jaw width 73, with quick adjustment in accuracy to gauge

  • No. 1111187 Precision vice PLF, size 2, jaw width 100, with quick adjustment in accuracy to gauge

  • No. 1125623 S8 Drill Chuck Key

  • No. 1132597 Drilling machine vice DPV, size 4, jaw width 150, with V-jaw and normal jaw SBO

  • No. 1154662 Key-type drill chuck Prima, Size 16, Mount 1/2"-20, Clamping capacity 3-16, light resistant, impact resistant

  • No. 1154663 Key-type drill chuck Prima, Size 16, Mount 5/8"-16, Clamping capacity 3-16, light resistant, impact resistant

  • No. 1154664 Key-type drill chuck Prima, Size 16, Mount B16, Clamping capacity 3-16, light resistant, impact resistant

  • No. 1154665 Key-type drill chuck Prima, Size 16, Mount B18, Clamping capacity 3-16, light resistant, impact resistant

  • No. 1178269 Keyless drill chuck Extra-RV, Size 10, Mount 1/4"-HEX, Clamping capacity 1-10 with radial locking plastic design, with retaining ring

  • No. 1179514 Precision vice PL-S micro, size 1, jaw width 34, with quick adjustment

  • No. 1179515 Precision vice PL-S micro, size 2, jaw width 45, with quick adjustment

  • No. 1179516 Precision vice PL-S, size 1, jaw width 70, with quick adjustment

  • No. 1179517 Precision vice PL-S, size 2, jaw width 90, with quick adjustment

  • No. 1179518 Precision vice PL-S, size 3, jaw width 120, with quick adjustment

  • No. 1189704 Cast iron Independent chuck UGE, size 160, DIN 6350 flat back mount (without mounting bolts), with reversible one-piece jaws, cast iron body

  • No. 1189705 Cast iron Independent chuck UGE, size 200, DIN 6350 flat back mount (without mounting bolts), with reversible one-piece jaws, cast iron body

  • No. 1189706 Cast iron Independent chuck UGE, size 250, DIN 6350 flat back mount (without mounting bolts), with reversible one-piece jaws, cast iron body

  • No. 1189707 Cast iron Independent chuck UGE, size 315, DIN 6350 flat back mount (without mounting bolts), with reversible one-piece jaws, cast iron body

  • No. 1189708 Cast iron Independent chuck UGE, size 400, DIN 6350 flat back mount (without mounting bolts), with reversible one-piece jaws, cast iron body

  • No. 1189709 Cast iron Independent chuck UGE, size 500, DIN 6350 flat back mount (without mounting bolts), with reversible one-piece jaws, cast iron body

  • No. 1189714 Cast iron Independent chuck UGE, size 200, DIN 55027 -5, with reversible one-piece jaws, cast iron body

  • No. 1189715 Cast iron Independent chuck UGE, size 200, DIN 55027 -6, with reversible one-piece jaws, cast iron body

  • No. 1189716 Cast iron Independent chuck UGE, size 250, DIN 55027 -5, with reversible one-piece jaws, cast iron body

  • No. 1189717 Cast iron Independent chuck UGE, size 250, DIN 55027 -6, with reversible one-piece jaws, cast iron body

  • No. 1189718 Cast iron Independent chuck UGE, size 250, DIN 55027 -8, with reversible one-piece jaws, cast iron body

  • No. 1189719 Cast iron Independent chuck UGE, size 315, DIN 55027 -5, with reversible one-piece jaws, cast iron body

  • No. 1189720 Cast iron Independent chuck UGE, size 315, DIN 55027 -6, with reversible one-piece jaws, cast iron body

  • No. 1189721 Cast iron Independent chuck UGE, size 315, DIN 55027 -8, with reversible one-piece jaws, cast iron body

  • No. 1189722 Cast iron Independent chuck UGE, size 400, DIN 55027 -6, with reversible one-piece jaws, cast iron body

  • No. 1189723 Cast iron Independent chuck UGE, size 400, DIN 55027 -8, with reversible one-piece jaws, cast iron body

  • No. 1189724 Cast iron Independent chuck UGE, size 400, DIN 55027 -11, with reversible one-piece jaws, cast iron body

  • No. 1189725 Cast iron Independent chuck UGE, size 500, DIN 55027 -6, with reversible one-piece jaws, cast iron body

  • No. 1189726 Cast iron Independent chuck UGE, size 500, DIN 55027 -8, with reversible one-piece jaws, cast iron body

  • No. 1189727 Cast iron Independent chuck UGE, size 500, DIN 55027 -11, with reversible one-piece jaws, cast iron body

  • No. 1189733 Cast iron Independent chuck UGE, size 200, DIN 55029 D1-4 Camlock, with reversible one-piece jaws, cast iron body

  • No. 1189734 Cast iron Independent chuck UGE, size 200, DIN 55029 D1-5 Camlock, with reversible one-piece jaws, cast iron body

  • No. 1189735 Cast iron Independent chuck UGE, size 200, DIN 55029 D1-6 Camlock, with reversible one-piece jaws, cast iron body

  • No. 1189736 Cast iron Independent chuck UGE, size 250, DIN 55029 D1-4 Camlock, with reversible one-piece jaws, cast iron body

  • No. 1189737 Cast iron Independent chuck UGE, size 250, DIN 55029 D1-5 Camlock, with reversible one-piece jaws, cast iron body

  • No. 1189738 Cast iron Independent chuck UGE, size 250, DIN 55029 D1-6 Camlock, with reversible one-piece jaws, cast iron body

  • No. 1189739 Cast iron Independent chuck UGE, size 250, DIN 55029 D1-8 Camlock, with reversible one-piece jaws, cast iron body

  • No. 1189740 Cast iron Independent chuck UGE, size 315, DIN 55029 D1-5 Camlock, with reversible one-piece jaws, cast iron body

  • No. 1189741 Cast iron Independent chuck UGE, size 315, DIN 55029 D1-6 Camlock, with reversible one-piece jaws, cast iron body

  • No. 1189742 Cast iron Independent chuck UGE, size 315, DIN 55029 D1-8 Camlock, with reversible one-piece jaws, cast iron body

  • No. 1189743 Cast iron Independent chuck UGE, size 400, DIN 55029 D1-6 Camlock, with reversible one-piece jaws, cast iron body

  • No. 1189744 Cast iron Independent chuck UGE, size 400, DIN 55029 D1-8 Camlock, with reversible one-piece jaws, cast iron body

  • No. 1189745 Cast iron Independent chuck UGE, size 400, DIN 55029 D1-11 Camlock, with reversible one-piece jaws, cast iron body

  • No. 1189746 Cast iron Independent chuck UGE, size 500, DIN 55029 D1-8 Camlock, with reversible one-piece jaws, cast iron body

  • No. 1189747 Cast iron Independent chuck UGE, size 500, DIN 55029 D1-11 Camlock, with reversible one-piece jaws, cast iron body

  • No. 1189780 Cast iron Independent chuck UGU, size 200, DIN 6350 flat back mount (without mounting bolts), with base jaws and reversible top jaws, cast iron body

  • No. 1189781 Cast iron Independent chuck UGU, size 250, DIN 6350 flat back mount (without mounting bolts), with base jaws and reversible top jaws, cast iron body

  • No. 1189782 Cast iron Independent chuck UGU, size 315, DIN 6350 flat back mount (without mounting bolts), with base jaws and reversible top jaws, cast iron body

  • No. 1189783 Cast iron Independent chuck UGU, size 400, DIN 6350 flat back mount (without mounting bolts), with base jaws and reversible top jaws, cast iron body

  • No. 1189784 Cast iron Independent chuck UGU, size 500, DIN 6350 flat back mount (without mounting bolts), with base jaws and reversible top jaws, cast iron body

  • No. 1189789 Cast iron Independent chuck UGU, size 200, DIN 55027 -5, with base jaws and reversible top jaws, cast iron body

  • No. 1189790 Cast iron Independent chuck UGU, size 200, DIN 55027 -6, with base jaws and reversible top jaws, cast iron body

  • No. 1189791 Cast iron Independent chuck UGU, size 250, DIN 55027 -5, with base jaws and reversible top jaws, cast iron body

  • No. 1189792 Cast iron Independent chuck UGU, size 250, DIN 55027 -6, with base jaws and reversible top jaws, cast iron body

  • No. 1189793 Cast iron Independent chuck UGU, size 250, DIN 55027 -8, with base jaws and reversible top jaws, cast iron body

  • No. 1189794 Cast iron Independent chuck UGU, size 315, DIN 55027 -5, with base jaws and reversible top jaws, cast iron body

  • No. 1189795 Cast iron Independent chuck UGU, size 315, DIN 55027 -6, with base jaws and reversible top jaws, cast iron body

  • No. 1189796 Cast iron Independent chuck UGU, size 315, DIN 55027 -8, with base jaws and reversible top jaws, cast iron body

  • No. 1189797 Cast iron Independent chuck UGU, size 400, DIN 55027 -6, with base jaws and reversible top jaws, cast iron body

  • No. 1189798 Cast iron Independent chuck UGU, size 400, DIN 55027 -8, with base jaws and reversible top jaws, cast iron body

  • No. 1189799 Cast iron Independent chuck UGU, size 400, DIN 55027 -11, with base jaws and reversible top jaws, cast iron body

  • No. 1189800 Cast iron Independent chuck UGU, size 500, DIN 55027 -6, with base jaws and reversible top jaws, cast iron body

  • No. 1189801 Cast iron Independent chuck UGU, size 500, DIN 55027 -8, with base jaws and reversible top jaws, cast iron body

  • No. 1189802 Cast iron Independent chuck UGU, size 500, DIN 55027 -11, with base jaws and reversible top jaws, cast iron body

  • No. 1189812 Cast iron Independent chuck UGU, size 200, DIN 55029 D1-4 Camlock, with base jaws and reversible top jaws, cast iron body

  • No. 1189813 Cast iron Independent chuck UGU, size 200, DIN 55029 D1-5 Camlock, with base jaws and reversible top jaws, cast iron body

  • No. 1189814 Cast iron Independent chuck UGU, size 250, DIN 55029 D1-4 Camlock, with base jaws and reversible top jaws, cast iron body

  • No. 1189815 Cast iron Independent chuck UGU, size 250, DIN 55029 D1-5 Camlock, with base jaws and reversible top jaws, cast iron body

  • No. 1189816 Cast iron Independent chuck UGU, size 250, DIN 55029 D1-6 Camlock, with base jaws and reversible top jaws, cast iron body

  • No. 1189817 Cast iron Independent chuck UGU, size 250, DIN 55029 D1-8 Camlock, with base jaws and reversible top jaws, cast iron body

  • No. 1189818 Cast iron Independent chuck UGU, size 315, DIN 55029 D1-5 Camlock, with base jaws and reversible top jaws, cast iron body

  • No. 1189819 Cast iron Independent chuck UGU, size 315, DIN 55029 D1-6 Camlock, with base jaws and reversible top jaws, cast iron body

  • No. 1189820 Cast iron Independent chuck UGU, size 315, DIN 55029 D1-8 Camlock, with base jaws and reversible top jaws, cast iron body

  • No. 1189821 Cast iron Independent chuck UGU, size 400, DIN 55029 D1-6 Camlock, with base jaws and reversible top jaws, cast iron body

  • No. 1189822 Cast iron Independent chuck UGU, size 400, DIN 55029 D1-8 Camlock, with base jaws and reversible top jaws, cast iron body

  • No. 1189823 Cast iron Independent chuck UGU, size 400, DIN 55029 D1-11 Camlock, with base jaws and reversible top jaws, cast iron body

  • No. 1189824 Cast iron Independent chuck UGU, size 500, DIN 55029 D1-8 Camlock, with base jaws and reversible top jaws, cast iron body

  • No. 1189825 Cast iron Independent chuck UGU, size 500, DIN 55029 D1-11 Camlock, with base jaws and reversible top jaws, cast iron body

  • No. 1193004 Quick-action drill chuck Supra-SK E, Size SK 13E, Mount 1/2"-20, Clamping capacity 1.5-13 impact resistant

  • No. 1193005 Quick-action drill chuck Supra-SK E, Size SK 13E, Mount 1/2"-20, Clamping capacity 1.5-13 impact resistant

  • No. 1209000 Driving discs, clamping circuit 8, toothed, right- and left-hand rotation, free from play

  • No. 1209001 Driving discs, clamping circuit 10, toothed, right- and left-hand rotation, free from play

  • No. 1209002 Driving discs, clamping circuit 12, toothed, right- and left-hand rotation, free from play

  • No. 1209003 Driving discs, clamping circuit 16, toothed, right- and left-hand rotation, free from play

  • No. 1209004 Driving discs, clamping circuit 20, toothed, right- and left-hand rotation, free from play

  • No. 1209005 Driving discs, clamping circuit 25, toothed, right- and left-hand rotation, free from play

  • No. 1209006 Driving discs, clamping circuit 32, toothed, right- and left-hand rotation, free from play

  • No. 1209007 Driving discs, clamping circuit 20, with interchangeable hard metal driving plates 6 x 3,2, right- and left-hand rotation

  • No. 1209008 Driving discs, clamping circuit 25, with interchangeable hard metal driving plates 6 x 3,2, right- and left-hand rotation

  • No. 1209009 Driving discs, clamping circuit 32, with interchangeable hard metal driving plates 6 x 3,2, right- and left-hand rotation

  • No. 1209010 Driving discs, clamping circuit 40, with interchangeable hard metal driving plates 6 x 3,2, right- and left-hand rotation

  • No. 1209011 Driving discs, clamping circuit 50, with interchangeable hard metal driving plates 6 x 3,2, right- and left-hand rotation

  • No. 1209012 Driving discs, clamping circuit 63, with interchangeable hard metal driving plates 6 x 3,2, right- and left-hand rotation

  • No. 1209013 Driving discs, clamping circuit 80, with interchangeable hard metal driving plates 6 x 3,2, right- and left-hand rotation

  • No. 1209016 Centre, clamping circuit 8-10, CoE

  • No. 1209017 Centre, clamping circuit 12, CoE